Purchase Order 47QSHA23P1AX8
Award Date
9/20/23
Potential Completion Date
12/19/23
Potential Value
$562
Federal Agency
Federal Acquisition Service
Awardee
Mid-Continent Machining Inc.
Ultimate Awardee
Not listed
NAICS Category
332216 - Saw Blade and Handtool Manufacturing
PSC Category
5120 - Hand Tools, Nonedged, Nonpowered
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Kansas City, KS 66105, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The General Services Administration (GSA) awarded Mid-Continent Machining Inc. a $739,000 firm fixed price purchase order to provide mechanical pullers. The pullers will have a spread range of 3-1/2 to 12-3/4 inches, reach of 4-1/2 to 22-1/2 inches, and leg lengths consisting of two each of the following sizes: 4-1/2, 9-1/2, 16-1/2, and 22-1/2 inches. The pullers will be made of steel with a phosphate coating and manufactured in Kansas City, Kansas over a performance period from October 2026...
Mid-Continent Machining Inc. has been awarded a firm fixed price purchase order valued at four hundred forty dollars by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide one mechanical puller in accordance with GSA purchase description 5120-00-288-7713. The puller has a cross block, slide plates, washers, forcing screw nut, securing nuts or bolts, and legs, with a spread range of two and one-eighth inches. Performance will occur at the prime contractor's...
Mid-Continent Machining Inc. has been awarded a firm fixed price purchase order valued at one thousand two hundred thirty dollars by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide mechanical pullers. Under this contract, the contractor will deliver three installing plates with a minimum spread range of four and one-eighth inches and a maximum of five and three-fourths inches. Additionally, the contractor will furnish four adapter plates with a minimum...
Mid-Continent Machining Inc. has been awarded a firm fixed-price purchase order valued at approximately one thousand US dollars by the General Services Administration (GSA) Federal Acquisition Service to deliver an oil seal puller set. The products will be manufactured in accordance with Pratt & Whitney Aircraft drawing number PWA-3762 Revision C dated September 2, 1966, which specifies a puller set featuring a case with exceptions. Delivery will be made to the prime contractor's facility in...
The U.S. General Services Administration (GSA) Federal Acquisition Service awarded a firm-fixed-price purchase order contract to Mid-Continent Machining Inc., a for-profit manufacturer located in Kansas City, Kansas. The $4,666.00 contract is for the provision of a Mechanical Puller, a specialized tool used to extract injector sleeves from cylinder heads on various Cummins engine models. This item is not set aside for small businesses. The contract has an ultimate completion date of December 29,...
Mid-Continent Machining Inc. has been awarded a $1,017 purchase order by the General Services Administration (GSA) Federal Acquisition Service to deliver puller sets and oil seal components in accordance with Pratt & Whitney Aircraft drawings. Performance will occur in Kansas City, Kansas under firm fixed pricing over a period of four months concluding in February 2024. The components relate to GSA's management of aviation equipment for government agencies. No set aside designation or...
Mid-Continent Machining Inc. has been awarded a firm fixed-price purchase order valued at approximately $1,017 by the General Services Administration (GSA) Federal Acquisition Service to deliver an oil seal puller set. The products will be delivered in accordance with Pratt & Whitney Aircraft drawing number PWA-3762 Revision C dated September 2, 1966, which provides specifications for a puller set featuring a case with exceptions. Performance will occur at the prime contractor's location...
The General Services Administration awarded Mid-Continent Machining Inc. a purchase order valued at $470 for mechanical pullers to support the U.S. Army's attack helicopter program. Under the firm fixed price contract, Mid-Continent Machining will provide Puller, Mechanical devices in accordance with Hughes Helicopters drawing specifications. The pullers will remove generator seal retainers from attack helicopters and are intended for use on 1520-01-106-9519 models. Performance will occur at...
Mid-Continent Machining Inc. has been awarded a firm fixed-price purchase order valued at approximately $2,000 by the General Services Administration (GSA) Federal Acquisition Service to deliver an oil seal puller set. The products will be delivered to Kansas City, Kansas by January 18, 2024 in accordance with Pratt & Whitney Aircraft drawing number PWA-3762 Revision C dated September 2, 1966. The purchase order was awarded under GSA's indefinite delivery vehicle and will provide an oil seal...
Mid-Continent Machining Inc. has been awarded a $1,300 purchase order by the General Services Administration (GSA) Federal Acquisition Service to deliver an adapter tip and pin extractor. The firm fixed price contract runs from June 21, 2023 through September 19, 2023. Per the statement of work, the products will be manufactured according to Boeing Company tool set drawings from 1982 and will be used to support GSA equipment and operations. Mid-Continent Machining will perform the work as...