Purchase Order 47QSHA23P1AB7
Award Date 9/16/23
Potential Completion Date 10/16/23
Potential Value $25
Federal Agency
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades will measure three inches in length and be supplied within a tolerance of negative 0.0625 to positive 0.125 inches. Delivery is required to Kipper Tool Company's facility in Gainesville, Georgia, between September 16 and October 16, 2023. This total small...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades will measure three inches in length and be produced within a tolerance of minus 0.0625 to plus 0.125 inches. Delivery will take place in Gainesville, Georgia by October 16, 2023 to fulfill GSA's requirements. This total small business set-aside contract...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades are to be 3 inches in length with a tolerance of plus or minus 0.125 inches. Delivery is to take place in Gainesville, Georgia by November 14, 2023. This total small business set-aside contract supports GSA procurement needs by providing precision measurement...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades are to be 3 inches in length with a tolerance of plus or minus 0.125 inches. Delivery will take place in Gainesville, Georgia by April 2024. This total small business set-aside contract supports GSA procurement needs by providing precision measurement tools.
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at fifty thousand dollars by the U.S. General Services Administration Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades will measure three inches in length with a tolerance of minus one-sixteenth to plus one-eighth inch. Delivery will occur between December 2023 and May 2024 to a location in Gainesville, Georgia. This total small business set-aside contract supports...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide thirty-five steel blades, a case, and locking device. The blades will measure three inches in length and be delivered within the specified thickness tolerances to check clearances in narrow slots and between fitted parts, as requested in the original solicitation. This total small business set-aside contract will be...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $50,000 by the U.S. General Services Administration Federal Acquisition Service to provide thirty-five straight blade gages with a tolerance of plus or minus 0.125 inches for use in checking clearances. Performance will occur in Gainesville, Georgia over an approximately six-month period concluding in May 2024. The contract has a total small business set-aside designation. This award supports GSA procurement of...
- Kipper Tool Company has been awarded a firm fixed price purchase order by the U.S. General Services Administration (GSA) Federal Acquisition Service for $25,000. Under the contract, Kipper Tool will provide thirty-five steel feeler gauge blades housed in a case and locking device. The straight blades are to measure between 3 to 3.125 inches in length to check clearances in narrow slots and between fitted parts for GSA. Place of performance will be in Gainesville, Georgia over a two month...
- Kipper Tool Company has been awarded a firm fixed-price purchase order contract valued at twenty-five dollars by the General Services Administration Federal Acquisition Service. The contract calls for the delivery of thirty-five steel blades for use in measuring clearances in narrow slots and between fitted parts, with a case and locking device. Blades are to be straight and measure three inches in length, within a tolerance of minus 0.0625 to plus 0.125 inches. The contract has a total small...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at $25,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide thirty-five straight blade feeler gauges. The gauges will consist of blades measuring three inches in length with a tolerance of minus 0.0625 to plus 0.125 inches. Kipper Tool will manufacture and deliver the gauges from its facility in Gainesville, Georgia by November 12, 2023 to fulfill GSA's requirements. This total...