Purchase Order 47QSHA23P19KL
Award Date 9/12/23
Potential Completion Date 10/12/23
Potential Value $253
Federal Agency
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The General Services Administration (GSA) awarded Kipper Tool Company a $36,280 firm fixed price purchase order to provide machinists' rules under a total small business set-aside designation. Kipper Tool will deliver rigid stainless steel or plated tool steel rules measuring 6 inches in length by 3/4 inch width, graduated in increments of 1/32 and 1/64 inches on one face and 1/2 and 1 millimeter on the other. The rules must meet a tolerance of 1/8 inch and thickness of 0.05 inch. Performance...
- The General Services Administration (GSA) awarded Kipper Tool Company a $361,100 firm fixed price purchase order to provide machinists' rules as part of its total small business set-aside program. Under the terms of the award, Kipper Tool will deliver stainless steel or plated tool steel rules measuring 6 inches in length by 3/4 inch width, graduated in increments of 1/32 and 1/64 inches on one face and 1/2 millimeters and 1 millimeter on the other. All rules must be within a tolerance of 1/8...
- The General Services Administration (GSA) awarded Kipper Tool Company a firm fixed price purchase order valued at thirty-six thousand two hundred ten dollars ($36,210) to provide machinists' rules. Under this total small business set-aside contract, Kipper Tool Company will deliver rigid stainless steel or plated tool steel rules measuring six inches in length by three-quarters inch in width, with tolerances of one-eighth inch and graduations of thirty-seconds and sixty-fourths of an inch on one...
- The General Services Administration (GSA) Federal Acquisition Service awarded Kipper Tool Company a $36,000 firm fixed price purchase order contract to supply machinists' rules. Under the contract, Kipper Tool Company will deliver stainless steel or plated tool steel machinists' rules measuring 6 inches in length and 3/4 inches in width, with tolerances of 1/8 inch and a thickness of 0.05 inch. The rules will include graduations on two faces, with one face graduated in increments of 1/32 and 1/2...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $50,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply machinist's rules. Under the contract, Kipper Tool will provide flexible steel rules measuring twelve inches in length, half an inch in width, and one sixty-fourth of an inch in thickness, graduated in one-hundredths, sixty-fourths, thirty-seconds, and tenths of an inch. The rules will have a chrome or dull satin finish...
- The General Services Administration (GSA) Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at approximately $98 to provide machinist's rules. The contract has a period of performance from August 23, 2023 through September 22, 2023. Kipper Tool Company will deliver steel machinist's rules measuring 18 inches in length and 3/4 inch in width, with a nominal thickness of 0.02 inch and graduations of 1/10, 1/32, 1/64, and 1/100 inch. The rules will have...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at twenty-five thousand dollars by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide machinist's rules. Under the contract, Kipper Tool Company will deliver flexible steel rules measuring twelve inches in length, half an inch in width, and one sixty-fourth of an inch in thickness, graduated in one-hundredths, sixty-fourths, thirty-seconds, and tenths of an inch. The rules will have a...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $50,000 by the U.S. General Services Administration (GSA) Federal Acquisition Service to supply machinist's rules. Under the contract, Kipper Tool will provide flexible steel rules measuring 12 inches in length, 1/2 inch in width, and 1/64 inch in thickness, graduated in 1/100, 1/64, 1/32, and 1/10 inch increments. The rules will have a chrome or dull satin coating and be manufactured in Gainesville, Georgia, with...
- The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at $66,330 to provide machinists' rules. Under the contract, Kipper Tool Company will deliver rigid steel rules measuring 6 inches in length, 3/4 inch in width, and .05 inch in thickness. The rules will have graduations on one face of 10ths of an inch and 50ths of an inch on the other face, with a chrome coating and black filled graduations. The place of...
- The General Services Administration (GSA) awarded a $30,850 delivery order to Kipper Tool Company under its Multiple Award Schedule contract. The order is for the supply of machinist's rules with specific dimensional and material requirements. Kipper Tool will provide rigid stainless steel or platinum rules with overall lengths of six inches, widths of three-quarters inch, and thicknesses of 0.05 inch. The rules will have graduations of one-sixteenth inch on one edge and one-thirty-second inch...