Purchase Order 47QSHA23P16VX
Award Date 8/14/23
Potential Completion Date 9/13/23
Potential Value $363
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The General Services Administration (GSA) Federal Acquisition Service awarded a $362.80 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The order is for machinists' rules with specified tolerances, gradations, and material. Performance will take place in Gainesville from August 4th to September 3rd, 2023. This total small business set-aside award under an unidentified GSA vehicle will provide six-inch by three-quarter-inch rigid stainless or plated tool steel...
- The General Services Administration (GSA) awarded a firm fixed-price purchase order valued at $36,210 to Kipper Tool Company of Gainesville, Georgia. The contract is for the delivery of machinists' rules with specified tolerances, gradations, and material composition to meet the requirements laid out in the original solicitation. Performance will occur in Gainesville from September 16 through October 16, 2023. This total small business set-aside award was made using the GSA Federal Acquisition...
- The General Services Administration (GSA) Federal Acquisition Service awarded a $25,000 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The contract calls for the delivery of machinist's rules with flexible lengths of 12 inches and widths of 1/2 inch, made of steel and chrome-plated with graduation units as small as 1/100, 1/64, 1/32, and 1/10 inch. Place of performance is Kipper Tool Company's facility in Gainesville. The period of performance is June 26...
- The General Services Administration (GSA) awarded a firm fixed-price purchase order valued at seventy-two thousand fifty-six dollars ($72,056) to Kipper Tool Company of Gainesville, Georgia. The contract is for the delivery of machinists' rules with specified tolerances, gradations, and material composition to meet the requirements laid out in the original solicitation. Performance will occur in Gainesville from August 10th through September 9th, 2023. The award was set aside for total small...
- The General Services Administration (GSA) awarded a $506.94 purchase order to Kipper Tool Company of Gainesville, Georgia. The firm fixed price order is for machinists' rules with specified tolerances, gradations, and material. Key products include 6-inch and 3/4-inch rigid rules marked in thirty-seconds and sixty-fourths of an inch on one face and halves and single millimeters on the other. The order is set aside for total small business and has a period of performance from September 16 to...
- The General Services Administration (GSA) awarded Kipper Tool Company a $36,280 firm fixed price purchase order to provide machinists' rules under a total small business set-aside designation. Kipper Tool will deliver rigid stainless steel or plated tool steel rules measuring 6 inches in length by 3/4 inch width, graduated in increments of 1/32 and 1/64 inches on one face and 1/2 and 1 millimeter on the other. The rules must meet a tolerance of 1/8 inch and thickness of 0.05 inch. Performance...
- The General Services Administration (GSA) awarded Kipper Tool Company a firm fixed price purchase order valued at thirty-six thousand two hundred ten dollars ($36,210) to provide machinists' rules. Under this total small business set-aside contract, Kipper Tool Company will deliver rigid stainless steel or plated tool steel rules measuring six inches in length by three-quarters inch in width, with tolerances of one-eighth inch and graduations of thirty-seconds and sixty-fourths of an inch on one...
- The General Services Administration (GSA) awarded Kipper Tool Company a $361,100 firm fixed price purchase order to provide machinists' rules as part of its total small business set-aside program. Under the terms of the award, Kipper Tool will deliver stainless steel or plated tool steel rules measuring 6 inches in length by 3/4 inch width, graduated in increments of 1/32 and 1/64 inches on one face and 1/2 millimeters and 1 millimeter on the other. All rules must be within a tolerance of 1/8...
- The General Services Administration (GSA) awarded Kipper Tool Company a $253,470 firm fixed price purchase order to provide machinists' rules under a total small business set-aside designation. Kipper Tool will deliver rigid stainless steel or plated tool steel rules measuring 6 inches in length by 3/4 inch width, graduated in increments of 1/32 and 1/64 inches on one face and 1/2 mm and 1 mm on the other. The rules must meet a tolerance of 1/8 inch and thickness of 0.05 inch. Performance will...
- The General Services Administration (GSA) awarded a $30,850 fixed-price contract with economic price adjustment to Kipper Tool Company. Under the delivery order, Kipper Tool will provide machinist's rules specified as 6-inch rigid rulers graded in either 1/16- or 1/32-inch increments on one edge and 1/64- or 1/100-inch increments on the other. Performance will occur in Gainesville, Georgia by January 17, 2024 to fulfill requirements under GSA's Multiple Award Schedule contract vehicle. As the...