A-E Design Services for Renovation of Secure and Classified Tenant Core Spaces for Department of Defense Agencies Worldwide and Support to Other Department of Defense Missions.
Added: Jun 08, 2012 7:56 am
C - ARCHITECT - ENGINEERING DESIGNID/IQ CONTRACTS FOR WORLDWIDE LOCATIONSSPECIAL PROJECTS PROGRAM - OMAHA DISTRICTUS ARMY CORPS OF ENGINEERSGENERAL INFORMATIONDocument Type: SynopsisAnnouncement Number: W9128F-12-R-0062Posted Date: June 7, 2012Original Response Date: July 6, 2012 @ 1400 HoursCurrent Response Date: July 6, 2012 @ 1400 HoursClassification Code: C - Architect and Engineering ServicesCONTRACTING OFFICE ADDRESSUS Army Corps of Engineers, Omaha District 1616 Capitol Avenue, Omaha, NE 68102-4901Contract Specialist: Renae Zaruba (402) 995-2058 Renae.M.Zaruba@usace.army.milDESCRIPTION1. CONTRACT INFORMATION: This contract is being procured in accordance with the Brooks Act as implemented in Federal Acquisition Regulations (FAR) Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. The services will include, but not be limited to, the following: Site Survey & Assessment, Studies & Reports, Basis of Design, Design Calculations, Drawings & Sketches, Specifications, Cost Estimates, Constructability Review, and Responses to Requests for Information (RFI). Project locations could potentially be both within the Continental United States (CONUS) and Outside the Continental United States (OCONUS).Up to two (2) Indefinite Delivery Contracts will be negotiated and awarded, each with one (1) one-year base period and four (4) one-year option periods. The amount of each contract will not exceed a combined capacity of $9,900,000. Minimum contract guarantee amount is $5,000.00. The contracts are anticipated to be awarded by September 2012. The contracts will be awarded based on the ranking of the firms: the firm ranked the highest will be awarded a contract; if the second highest-ranked firm is satisfactorily qualified, the second contract will be awarded to that firm. However, if the second highest-ranked firm is not satisfactorily qualified, only one contract will be awarded.Work will be issued by negotiated firm-fixed-price task orders. The Contracting Officer will consider the following factors in deciding which contractor will be selected to negotiate an order: performance and quality of deliverables under the current contract, current capacity to accomplish the order in the required time, uniquely specialized experience, and equitable distribution of work amount the contractors.North American Industrial Classification System code is 541330, which has a size standard of $14M in average annual receipts.The wages and benefits of service employees (see FAR Subpart 22.10) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act, as determined relative to the employee's office location (not the location of the work).To be eligible for contract award, a firm must be registered in the Central Contractor Registration (CCR). Register via the CCR Internet site at http://www.ccr.gov.2. PROJECT INFORMATION: Projects will consist primarily of design services for renovation of the Defense Attach Offices (DAO) facilities located in United States embassies throughout the world. These facilities are tenant CORE space. Additional services may be provided for the support of the Department of Defense (DoD) Mission to include, but not be limited to Special Forces, Security Forces, Tactical Forces and the Support Forces required to complete mission requirements. These services may entail permanent and temporary requirements including, but not limited to, in the area of fixed wing or rotary landing pads or runways and associated infrastructure; design of internal and perimeter security such as fencing, entry control points; training facilities such as practice repel compounds, structural intrusion training compounds; housing; command facilities either on a permanent or temporary basis and all associated support infrastructure; permanent and temporary POL compounds; cargo handling compounds and support facilities and infrastructure; communication support to include CORE space and dataThe A-E firm may be requested to provide A-E support to the Project Delivery Team during the solicitation and/or construction phases.3. SELECTION CRITERIA: The selection criteria are listed below in descending order of importance (first by major criterion and then by each sub-criterion). Criteria a - g are primary; Criteria h - j are secondary and will only be used as "tie-breakers" among firms that are essentially technically equal.a. Demonstrate the ability to work on classified projects or installations. Members of the firm should currently have a minimum of a Secret security clearance. Identify type and number of disciplines your firm has with Secret personnel security clearance issued by the Office of Personnel Management (OPM), the Defense Industrial Security Clearance Office (DISCO), or other U.S. Government agency meeting Security Classification Specification DD Form 254 for the following personnel:i. Program Managerii. Project Manageriii. Architectiv. Electricalv. Mechanicalvi. Structuralvii. Estimatorviii. Communicationsix. Fire Protectionb. Verify ability to receive, store, and process classified secret material via a DoD-accredited security facility clearance. Members shall have secret facility clearance validated by active Commercial or Government Entity (CAGE) Code to store and processes secret material. Provide CAGE Code for verification.c. Identify projects within the last five years where your firm has performed the following:i. Experience developing permit design documents to renovate U.S. Embassy Tenant Agency offices from CAA-restricted to CAA-CORE space in accordance with Overseas Policy Board (OPB) standards. Note: New Embassy Construction or new construction experience is not considered equal project experience for Overseas Building Operations (OBO) permit review process.ii. Experience as the design agent obtaining Department of State OBO permit for a Tenant Renovation at a U.S. Embassy.iii. Experience with multi-discipline task order type contracts that require the ability to respond quickly to task orders, request so fro offers, and completion of projects on an accelerated schedule. Special emphasis should be provided for previous experience with similar Indefinite Delivery / Indefinite Quantity (ID/IQ) A-E Contract Task Orders.d. For the following key disciplines, identify and provide resumes/qualifications specific to renovation of U.S. Embassies with CAA-restricted to CAA-CORE space upgrades for Tenant space in addition to longevity with the firm. Evaluation of these disciplines will consider education, training, and certifications.i. Program Managerii. Project Manageriii. Architectiv. Electricalv. Mechanicalvi. Structuralvii. Estimatorviii. Communicationsix. Fire Protectione. Document recent experience in developing design documents for permanent or temporary facilities for the following type of projects:i. Experience designing fixed wing or rotary landing pads or runways and associated infrastructure.ii. Experience designing internal and perimeter security, such as fencing, entry control points, etc.iii. Experience designing training facilities, such as practice repel compounds and structural intrusion training compounds, etc.iv. Experience designing housing and command facilities either on a permanent or temporary basis and all associated support.v. Experience designing permanent and temporary POL compounds.vi. Experience designing cargo handling compounds and support facilities and infrastructure.vii. Experience designing communication support to include CORE space and data.f. Provide an organization chart and sequence flow diagram that addresses A-E team organization, quality control procedures, cost control, coordination of in-house disciplines and consultants, cost estimates, performance of Biddable, Construction, Operation, and Environmental (BCOE) reviews and demonstrates the ability to do multiple projects to support this contract. The SF 330 shall clearly indicate the primary office where the work will be performed and the staffing at that office. (SF 330, Part I, Section H, Item 1). The firm's organizational structure chart showing the number of personnel in the key disciplines shall be presented to insure that the firm can meet required schedules. (SF 330, Part I, Sections E & G)g. Provide copies of all Architect-engineer Contract Appraisal Support System (ACASS) performance evaluations for projects referenced on the Standard Form 330. Firms can access past performance evaluations on the Contractor Performance Assessment (CPARS) website at http://www.cpars.csd.disa.mil/acassmain.htm.h. Volume of DoD A-E contract awards in the last 12 months, with the objective of effecting an equitable distribution of DoD A-E contracts among qualified firms, including small businesses and small disadvantaged businesses.i. Location of the firm in the general geographical area of the City of Washington D.C.j. Extent of participation of small businesses (including women-owned), small disadvantaged businesses, historically black colleges and universities, and minority institutions in the proposed contract team, measured as a percentage of the total estimated effort.The following evaluation criteria will be used to evaluate the documentation submitted:Exceptional - The Offer exceeds the scope of the announcement requirements in the majority of the aspects of the particular factor or sub-factor. The Offer also provides advantages and exceeds the announcement requirements in performance or capability indicating maximum benefit to the Government. The factor or sub-factor has no weaknesses or omissions.Above Average - The Offer exceeds the scope of the announcement requirements in many aspects of the particular factor or sub-factor. The Offer provides advantages in key areas or exceeds announcement requirements in performance or capability indicating significant benefit to the Government. The factor or sub-factor may contain weaknesses or omissions that have no impact on the Offer as a whole and are easily correctable.Average - The Offer matches the scope of the announcement requirements of the particular factor or sub-factor. There may be strengths but they may not aggregate into an advantage indicating additional benefit to the Government or may be offset by weaknesses. There may be weaknesses, significant weaknesses or omissions; these are correctable without major revision(s) of the Offer. There is room for improvement in this factor or sub-factor.Marginal - The Offer matches some but not all of the announcement requirements of the particular factor or sub-factor. There may be limited or individual strengths but they do not aggregate into an advantage and are offset by weaknesses, significant weaknesses, deficiencies or omissions. The Government may still receive benefit from the Offer submitted. Unacceptable - The Offer fails to meet a majority of announcement requirements or has omitted critical information required to evaluate this factor or sub-factor. There are no strengths. The Offer contains a large number of or highly significant weaknesses, significant weaknesses, omissions and/or deficiencies. Upon completion of evaluation of the SF 330 offers received, a short list of most qualified firms will be determined. Until selection is completed, there will be no notification of any type to firms either on the short list or not who submitted information for consideration. Once the short list is approved by the Source Selection Authority, those firms that did not make the short list will be promptly notified.4. SUBMISSION REQUIREMENTS:a. Interested firms having the capabilities to perform this work must submit six copies, each containing Parts I and II of the SF 330 information for the prime firm and all consultants, to the address noted in (d) of this section not later than 1400 hours on the response date indicated above. Each copy shall be divided by tabs (dividers) separating Parts I and II, and tabs dividing the subsequent sections from each other (Note: Parts I, II, and Subsequent Sections are as defined in the SF 330 Instructions). The SF 330 shall have a page limit of 75 pages. A page is one side of a sheet, 8-1/2" by 11". If a fold out is used, each sheet of a fold out shall count as a minimum of 2 pages. Font size shall not be smaller than 10 fonts. Pages shall be numbered.b. Include the firm's ACASS number on the SF 330, Part I, Block B. On the SF 330, Part I, Block C, provide the ACASS number for each consultant, if available. If your firm does not have an ACASS number, it can be obtained from the Portland District, Corps of Engineers ACASS database by calling (530) 808-4591.c. Facsimile transmissions will not be accepted. Announcement packages are not provided and no additional project information will be given to firms during the announcement period. This is not a request for proposal. Personal visits for the purpose of discussing this announcement will not be scheduled. Please check for updates to this announcement www.fbo.gov .d. General Information:i. Points of Contact: Ms. Renae Zaruba at 402.995.2058 and Renae.M.Zaruba@usace.army.mil and Mr. Doug Hadley at 402.995.2068 and Doug.E.Hadley@usace.army.mil.ii. Mailing address for submission:US Army Corps of EngineersATTN: CECT-NWO-E, ZarubaAnnouncement W9128F-12-R-00611616 Capitol AvenueOmaha, NE, 68102-4901
W9128F-12-R-0062 Department of the Army Corps of Engineers Engineering District Omaha
6/8/12, 7:56 AM