M775, M751 and M781 Mortar Practice Fuze Solicitation
Added: May 19, 2017 8:55 am The US Army Contracting Command-New Jersey, Picatinny Arsenal, NJ, in support of the Project Manager Combat Ammunition Systems, has a requirement to manufacture, test, package and deliver M751/M775/M781 Point Detonating (PD) Practice Fuzes using the Technical Data Package (TDP) and requirements of this solicitation.Solicitation is attached to this FBO announcement. Please note that the highest Distribution Level is "Distribution D" for this procurement. A Distribution D statement by definition allows distribution authorized to the Department of Defense and U.S. DoD contractors only. Other requests shall be referred to PM-CAS.Disclosure and use of the TDPs are restricted by the Non-Disclosure and Non-Use Agreement (NDA) (Attachment 0002, Section J) that the offeror is required to execute prior to accessing the TDPs along with a current DD 2345 Militarily Critical Technical Data Agreement (Attachment 0008, Section J), and the AMSTA-AR Form 1350 Technical Data Questionnaire (Attachment 0003, Section J.)Once the above mentioned forms are completed and verified, the Offeror shall e-mail the below Point of Contact in order to obtain access to the TDPs:Army Contracting Command- New Jersey (ACC-NJ)ACC-NJ-CAContract SpecialistMrs. Magda Szymanskimagda.m.szymanski.civ@mail.mil W15QKN-17-R-0015 Department of the Army Materiel Command Contracting Command Picatinny Arsenal
5/19/17, 8:55 AM M751, M7775, and M781 Point Detonating (PD) Practice Fuzes
Added: Apr 07, 2017 3:01 pm The Army Contracting Command - New Jersey (ACC-NJ), Picatinny Arsenal, NJ 07806-5000, on behalf of the Office of the Project Manager for Combat Ammunition Systems, intends to issue Request for Proposal (RFP) W15QKN-17-R-0015 for the manufacture and delivery of M751, M775, and M781 Point Detonating (PD) Practice Fuzes. These Fuzes shall be provided to Load/Assemble/Pack (LAP) facilities for use on mortar cartridge ammunition for the U.S. Army and Marine Corps.The M751 is a single safe PD fuze for use on the M879 81mm Full Range Practice Cartridge (FRPC). It simulates the appearance of the M734A1 Multi-Option Proximity Fuze (same settings but they are not functional). Smoke and flash are emitted tough holes in the rear of the mortar cartridge. It has a pyrotechnic smoke composition charge of 16 grams.The M775 is a single safe PD fuze for use on the M769 60mm FRPC. It simulates the appearance of the M734A1 Multi-Option Proximity Fuze (same settings but they are not functional). Smoke and flash are emitted tough holes in the rear of the mortar cartridge. It has a pyrotechnic smoke composition charge of 12 grams.The M781 is a single safe PD fuze for use on the M931 120mm FRPC. It simulates the appearance of the M734A1 Multi-Option Proximity Fuze (same settings but they are not functional). Smoke and flash are emitted tough the mortar boom assembly. It has a pyrotechnic smoke composition charge of 16 grams.The M751/M775/M781 PD Fuzes shall be manufactured, inspected, assembled, packaged and delivered in accordance with the Government Technical Data Packages (TDP) and applicable contract requirements, which will be available upon solicitation release. Competition for this effort will be restricted within the United States and Canada, under the authority of 10 U.S.C. 2304(c)(3), as implemented by FAR 6.302-3 (a)(2)(i), Industrial Mobilization; Engineering, Developmental, or Research Capability; or Expert Services to maintain a facility, producer, manufacturer, or other supplier available for furnishing supplies or services in case of a national emergency or to achieve industrial mobilization.Offeror(s) receiving an award will be awarded a Firm-Fixed Price, Indefinite Delivery Indefinite Quantity (IDIQ) contract. The Government intends to make up to two awards. Each contract will include five one-year ordering periods. The Government intends to procure up to approximately 3,818,000 total Fuzes. Delivery orders will be competed amongst contractors selected for award.This requirement involves technical data marked "Distribution D - Distribution authorized to the Department of Defense and U.S. DoD contractors only." Interested firms are required to submit a signed and completed DD Form 2345, Militarily Critical Technical Data Agreement, AMSTA-AR Form 1350, Technical Data Request Questionnaire, and Non-Disclosure Agreement for Government's consideration to provide the TDP.Please note this notice does not constitute a Request for Proposal (RFP). The anticipated award is scheduled for September 2017. It is expected that the solicitation will be posted in February 2017. Point of contact for this notification and any requests/questions may be directed to Magda Szymanski via email ONLY to: magda.m.szymanski.civ@mail.mil. Telephone inquiries will not be accepted. W15QKN17R0015 Department of the Army Materiel Command Contracting Command Picatinny Arsenal
4/7/17, 3:01 PM