Delivery Order M0014607DN278-0013

The Naval Sea Systems Command (NAVSEA) awarded a $24,000.00 firm fixed-price purchase order to Willrich Precision Instrument Company, Inc., a for-profit small business in Cresskill, New Jersey. The contract is for the procurement of 30 units each of Mitutoyo 0-6 Depth Micrometers and 0-1 Quantum Micrometers, which will be delivered to the Marine Corps Air Station Calibration Standards Ready Issue Activity in Beaufort, South Carolina. The contract does not have a set-aside designation and was...

This is a $12,143 firm fixed price purchase order awarded to Micro Precision Calibration, Inc. (Vendor ID: cFgwdm1hTURybEg3cm5LSWViSFptZz09) by the Office of Administrative Services Procurement Management Branch (Agency ID: 1200|12G2|123A94-A) on July 8, 2024. The contract is for calibrations for the agency's test and measurement equipment. The work is to be performed in Albany, California, and has a completion date of July 7, 2025. This award is not associated with a set-aside program. Micro...

This federal contract award is for the delivery of outside micrometers to the General Services Administration (GSA) Federal Acquisition Service under the agency's RC2 Blanket Purchase Agreement (BPA) vehicle. The prime contractor, Premier & Companies, Inc., will provide calipers with an enamel frame, solid anvil, and measurement range of 2 to 3 inches that graduate in 0.001 inch increments. The micrometers will include a spindle lock, ratchet or friction stop, plastic fitted case, and...

This federal contract award is for outside micrometer calipers with a fixed price of $192.50. The General Services Administration (GSA) Federal Acquisition Service issued the call against the Research Category 2 (RC2) Blanket Purchase Agreement, a government-wide acquisition contract vehicle, for the purchase of the calipers. Premier & Companies, Inc. is the prime contractor and will provide the calipers, which have a maximum graduation of 0.0001 inch, maximum flexure of 0.0001 inch, and...

Premier & Companies, Inc. has been awarded a one hundred ninety-two dollar fixed price with economic price adjustment contract by the General Services Administration (GSA) Federal Acquisition Service to provide outside micrometer calipers under the GSA Blanket Purchase Agreement (BPA) for Research Category 2 (RC2). The micrometers must have an enameled finished frame with a solid anvil, measure up to one inch with graduations of 0.0001 inch, and meet specified tolerances for flexure,...

The General Services Administration (GSA) awarded Kaufman Company, Inc. a firm fixed-price purchase order valued at $224.12 to supply inside micrometers with a measurement range of 0.2 to 1.2 inches and a graduation of 0.001 inches. Performance will occur in Norwood, Massachusetts over a period of four months concluding in late September 2023. The micrometers must achieve a measurement accuracy of 0.0002 inches and be constructed of steel with a chrome coating. This appears to be a small...

This federal contract award is for outside micrometer calipers with a measurement range of 1-2 inches and a graduation of 0.0001 inches. The prime contractor is Wright Tool Company, LLC, located in Warren, Michigan, which will provide the micrometers under a Blanket Purchase Agreement (BPA) established by the General Services Administration (GSA) Federal Acquisition Service. The funding agency is GSA and the contract value is $1,268.70. Performance will take place in Warren, Michigan from...

Premier & Companies, Inc. has been awarded a one hundred ninety-two dollar fixed price with economic price adjustment contract by the General Services Administration Federal Acquisition Service to provide outside micrometer calipers under the GSA's one hundred ninety-two dollar RC2 Blanket Purchase Agreement vehicle. The calipers must have an enameled finished frame with a solid anvil, have a measurement range of one inch, graduations of 0.0001 inch, permissible flexure of 0.0001 inch, and...

Kipper Tool Company has been awarded a purchase order from the General Services Administration (GSA) Federal Acquisition Service to provide twelve steel depth micrometers. Valued at three hundred fifty-six dollars, this firm fixed price contract has a period of performance through June 7, 2024. The micrometers are to measure between zero and twelve inches with a resolution of .001 inches, feature a ratchet stop and case, and be constructed with a 3/32 inch diameter rod and 2-1/2 by 3/8 inch...

Document Imaging Dimensions Inc. has been awarded a $110 fixed price with economic price adjustment contract under GSA's RC2 Blanket Purchase Agreement vehicle to supply outside micrometers with specified measurement capabilities. The micrometers will have an enameled frame, solid anvil, measurement range of 1 to 2 inches, and graduations of 0.0001 inch. Permissible flexure is 0.0001 inch and flatness error may not exceed 0.00005 inch. Performance is required through January 12, 2024. As the RC2...