Delivery Order GS06FR0065-GSNWM8LPWG

Wright Tool Company, LLC was awarded a $78,120 fixed-price contract with economic price adjustment by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide lug wrenches for the U.S. Army. The wrenches will measure approximately 16 inches in overall length and have wrenching sizes of 24mm and 33mm, weighing between 4 and 5.5 pounds and constructed of steel. They will be used to remove lug nuts on M969 series tanker trailers. The contract was awarded under the GSA...

Wright Tool Company, LLC has been awarded a firm fixed-price purchase order valued at thirty-seven thousand one hundred thirteen dollars by the General Services Administration (GSA) Federal Acquisition Service to supply an axle nut socket square drive measuring three-fourths inch in diameter and three and one-fourth inches in opening width. The socket wrench will feature an eight-point wrenching surface, steel construction with oxide coating, and be intended for manual use. Place of...

Wright Tool Company, LLC has been awarded a firm fixed-price purchase order valued at three hundred seventy-one dollars and thirty cents ($371.30) by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide an axle nut socket square drive measuring three-fourths inch in size with a three and one-quarter inch internal wrench opening and steel construction with oxide coating. Performance will take place in Troy, Michigan over a period of three months concluding in late...

The U.S. General Services Administration (GSA) Federal Acquisition Service awarded a $1,582.24 fixed-price with economic price adjustment contract to Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan. The contract is for the delivery of 16-inch (+/- 1/2 inch) lug wrenches with 24mm and 33mm wrenching sizes, weighing 4-1/2 (+/- 0.5) lbs, made of steel. These wrenches will be used for lug nut removal on M969 series tanker trailers. The contract is a...

Wright Tool Company, LLC was awarded a $80,850 fixed-price contract with economic price adjustment under the General Services Administration (GSA) Federal Acquisition Service's RC2 Blanket Purchase Agreement vehicle. The contract calls for the delivery of automotive lug nut wrenches to federal specifications, including cross-type wrenches in square sizes of 1-1/16, 1-1/4, and 1-1/2 inches. Performance will occur at the prime contractor's facility in Warren, Michigan, spanning from August 22nd to...

Wright Tool Company, LLC was awarded a $31,520 fixed-price contract with economic price adjustment by the General Services Administration (GSA) Federal Acquisition Service to provide lug wrenches for the U.S. Army. Under the contract, Wright Tool will supply steel lug wrenches 16 inches in overall length capable of removing lug nuts from M969 series tanker trailers. The wrenches will have wrenching sizes of 24mm and 33mm and weigh between 4 and 5.5 pounds. Performance will take place at Wright...

Wright Tool Company, LLC was awarded a $68,240 fixed-price contract with economic price adjustment by the General Services Administration (GSA) Federal Acquisition Service to provide lug wrenches for the U.S. Army. Under the GSA RC2 Blanket Purchase Agreement, Wright Tool will supply steel lug wrenches 16 inches in overall length capable of removing lug nuts from M969 series tanker trailers. Performance will take place at Wright Tool's facility in Warren, Michigan over a one-week period in...

<p>This federal contract award was issued by the TACOM Life Cycle Management Command, a defense agency, to Joint And Clutch Service Inc. for the procurement of a WRENCH, SOCKET to be used with NSN 232-01-432-4847 (TRUCK, TRACTOR). The contract has a firm fixed price of $2,784.00 and was awarded on March 7, 2005, with an ultimate completion date of April 9, 2005. The contract does not have a set-aside designation.</p>

The General Services Administration Federal Acquisition Service awarded Wright Tool Company, LLC a fixed price with economic price adjustment contract valued at one hundred twenty-four dollars and fifty cents ($124.50) to provide socket, socket wrench: axle nut socket square drive size three-quarters inch single end internal hex wrench opening four inches internal material steel or aluminum coating oxide under the agency's RC2 Blanket Purchase Agreement vehicle. Performance will occur in Warren,...

Wright Tool Company, LLC has been awarded a $910 fixed-price contract with economic price adjustment by the General Services Administration (GSA) Federal Acquisition Service to provide lug wrenches for the U.S. Army. Under the GSA RC2 Blanket Purchase Agreement, Wright Tool will deliver steel lug wrenches 16 inches in overall length capable of removing lug nuts from M969 series tanker trailers. Performance will take place at Wright Tool's facility in Warren, Michigan between July 8-16, 2023....