Delivery Order GS06F0020K-HSCGG614FQT3149

The General Services Administration (GSA) awarded a $501.46 delivery order contract to Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC doing business as Snap-On Industrial, for the provision of portable pneumatic drills. The drills are to operate between 90 and 450 pounds per square inch (PSI) of air pressure at consumption rates up to 4 cubic feet per minute (CFM), with trigger-controlled variable speed rates of zero to 450 revolutions per minute. The drills will have...

The General Services Administration (GSA) awarded Wright Tool Company, LLC a $309.46 contract under the RC2 Blanket Purchase Agreement (BPA) vehicle. The contract calls for the delivery of portable pneumatic drills with straight chucks sized at 1/2 inch and keyed jaws. The drills will have pistol grip handles and operate between 80 to 100 pounds per square inch of air pressure while consuming no more than 45 cubic feet of air per minute. The drills will weigh approximately 8 pounds and have...

The General Services Administration (GSA) awarded Wright Tool Company, LLC a $309.46 contract under the RC2 Blanket Purchase Agreement (BPA) vehicle. The contract calls for the delivery of portable pneumatic drills with straight chucks sized at 1/2 inch and keyed jaws. The drills will have pistol grip handles and operate between 80 to 100 pounds per square inch of air pressure while consuming no more than 45 cubic feet of air per minute. The drills will have 1/4 or 3/8 inch male National Pipe...

Wright Tool Company, LLC was awarded a $497,000 fixed-price contract with economic price adjustment by the U.S. General Services Administration (GSA) Federal Acquisition Service to provide portable, pneumatic drills under GSA's RC2 Blanket Purchase Agreement vehicle. The drills must meet Federal Specification OO-D-691F and will have a 1/4-inch straight handle pistol grip drive with 1/4-inch air inlet and maximum torque of 2 foot-pounds. Place of performance will be Wright Tool's facility in...

The General Services Administration (GSA) awarded Kaufman Company, Inc. a firm fixed price purchase order under a GSA schedule contract vehicle to deliver portable pneumatic drills. The drills have straight pistol grip handles, keyed chucks sized at 3/8 inch, and connect via 1/4 inch NPT air inlet. Weighing approximately 8 pounds with a maximum operating pressure of 80-100 PSI, the drills will consume around 70 SCFM of air at 2.5 foot-pounds of torque. Performance will take place in Norwood,...

This is a firm fixed-price purchase order awarded by the Federal Acquisition Service (FAS), a component of the General Services Administration (GSA), to Aero Industrial Tool Co, a self-certified small disadvantaged and woman-owned business. The contract is for the procurement of a pneumatic portable drill with specific technical requirements, including an overall length of 11.5 inches, maximum weight of 1.7 lbs, body grip throttle, 90-degree angle, and 1/4-inch female spindle. The contract has a...

This is a firm-fixed-price purchase order awarded to Aero Industrial Tool Co, a self-certified small disadvantaged and woman-owned business, by the Federal Acquisition Service (FAS) of the General Services Administration (GSA). The contract is for the procurement of a pneumatic, portable drill with an overall length of 11.5 inches, maximum weight of 1.7 lbs, and 90-degree angle drive. The drill has a female 1/4-28 spindle and a no-load speed specification. The contract has a ceiling value of...

This is a fixed-price delivery order awarded to Ingersoll-Rand Company by the Naval Air Systems Command (NAVAIR), a defense agency, for the procurement of a portable pneumatic drill, Ingersoll-Rand part number 3P13ST4. The award has a ceiling value of $1,224.10 and an ultimate completion date of April 29, 2004. This order was not set aside for any specific business category. Ingersoll-Rand is a for-profit manufacturer of industrial equipment, and this appears to be a standalone contract award...

This is a firm fixed-price purchase order contract awarded by the Department of the Army Materiel Command Aviation and Missile Life Cycle Management Command to US Air Tool Co Inc. (USATCO), a small business subchapter S corporation, for the procurement of two Quackenbush Pneumatic Precision Self Feed Drills with a total potential value of $30,526.20. The contract has a completion date of October 22, 2021 and was set aside for total small business participation. The original solicitation was...

This is a delivery order contract awarded by the Air Force Materiel Command, a defense agency, to Ingersoll-Rand Company for the purchase of a pneumatic portable drill. The contract has a ceiling value of $48,408.64 and is a fixed-price with economic price adjustment contract. The contract did not have a set-aside designation. The award date was March 23, 2005, with a final completion date of May 10, 2005. Ingersoll-Rand Company is a for-profit manufacturer of goods and has an active...