Delivery Order GS00F0016M-GSMPNEJT1034

The General Services Administration awarded a firm fixed price purchase order valued at $338 to Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC doing business as Snap-On Industrial, to supply mechanical pullers. The pullers are specified as reach length 2-7/8 to 3-1/4 inches, spread range 4-1/2 inches maximum, two-jaw pressure screw operated with a capacity of 5 to 6 tons, made of steel and including a head or yoke and hexagon headed forcing screw. Performance will take...

GSA Federal Acquisition Service issued a BPA call to Wright Tool Company, LLC under the RC2 Blanket Purchase Agreement on May 5, 2026, with a ceiling value of $1,247.45 for a mechanical puller (Lisle Corp. PN 54150 or equal) used for lifting and pulling battery terminal clamps. The puller features a T-handle and two spring-loaded jaws, with overall dimensions of 5 inches length by 4 inches width, and is constructed of steel. Place of performance is Warren, Michigan. The call carries a...

GSA's Federal Acquisition Service issued a BPA call to Wright Tool Company, LLC under the RC2 Blanket Purchase Agreement on July 29, 2026, with a ceiling value of $1,826.60 for a puller seal tool. The RC2 BPA is a GSA-administered multiple-award vehicle for industrial hand tools and specialized mechanical equipment supplied to federal civilian agencies. The puller tool specified in this call features overall length of 12-5/8 inches, a 3-1/2 inch handle length, 1-1/4 inch handle width, 3-13/32...

This federal contract award is for the delivery of mechanical pullers to the General Services Administration (GSA) Federal Acquisition Service under the agency's RC2 Blanket Purchase Agreement vehicle. The prime contractor, Wright Tool Company, LLC, will provide LISLE Corporation part number 54150 pullers, or equivalent products from ZIM Manufacturing Co. or other sources. The pullers are used for lifting and pulling battery terminal clamps and measure approximately 5 inches in length by 4...

The General Services Administration awarded a delivery order contract valued at twenty-three dollars to Idsc Holdings LLC, doing business as Snap-On Industrial. The contract is for the delivery of a mechanical puller with a 3-ton capacity, 2-inch reach, and 1-11/16-inch secondary reach. This product will support pulling tools from J4289B 6-Tong General Puller, J4290B 6-Ton Standard Puller, and Proto-EASSE J4245 General Puller. Performance will occur in Kenosha, Wisconsin by January 16, 2024. The...

The General Services Administration (GSA) Federal Acquisition Service awarded a firm fixed-price purchase order valued at three hundred twenty-five dollars and sixty-seven cents ($325.67) to Kaufman Company, Inc. doing business as Kaufman Co Inc. The contract calls for the delivery of one mechanical puller in accordance with GSA purchase description 5120-00-293-2925 dated May 9, 1999. Key specifications of the puller include a gear and bearing drive, two jaw external single end grip, and reach...

The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed-price purchase order valued at one hundred nine dollars and ninety-one cents ($109.91) to deliver a mechanical puller attachment. Performance will occur in Gainesville, Georgia through August 18, 2023. The puller attachment specifications include an inside width of one and eleven-sixteenths inches, a spread range of two and five-eighths inches minimum to one and one-eighth inches maximum, and...

The General Services Administration's Federal Acquisition Service awarded a purchase order to Mid-Continent Machining Inc. on July 10, 2026, for $3,400.00 to supply a mechanical puller used to extract the rear bearing cage on an Allison T56A-7 gas turbine engine. The puller features a four-arm aluminum T-handle body, 7-inch length, 1/2-20 NF threaded forcing screw, and four 1/4-28 NF threaded legs. Work is performed in Kansas City, Kansas. The order is firm fixed price with an ultimate...

This $2,410 firm fixed price purchase order was awarded by the Department of the Army to Huntington Partners, Inc. (doing business as Continental Tool & Mfg.), a veteran-owned small business manufacturer of specialty tools, gages, and industrial components. The contract is for the delivery of a PULLER, MECHANICAL item, with an ultimate completion date of September 16, 2005. This award was not set aside for any specific business category. Huntington Partners, Inc. has received numerous...

This is a firm fixed-price purchase order awarded by the Defense Logistics Agency (DLA) Aviation to Kell-Strom Tool International, Inc., a small business manufacturer of precision aerospace tooling and ground support equipment based in Wethersfield, Connecticut. The contract has a ceiling value of $2,269.00 and a performance period ending on April 10, 2025. The contract is for the procurement of a PULLER,MECHANICAL (CLIN 8511067567) and does not have a set-aside designation. Kell-Strom Tool...