Delivery Order GS00F0016M-GSMPNBH62085

The General Services Administration's Federal Acquisition Service issued a purchase order to Consolidated Inventory Supply, Inc. on August 14, 2026, for a mechanical puller assembly valued at $1,405.00, with an ultimate completion date of September 13, 2026. The order covers an impeller puller assembly for HJ 291 and 321 jets, featuring a 76-millimeter outer diameter tube with 4.9-millimeter wall thickness and an 88-millimeter outer diameter nut. Work is performed in Alcoa, Tennessee. No small...

GSA Federal Acquisition Service issued a BPA call to Wright Tool Company, LLC under the RC2 Blanket Purchase Agreement on May 5, 2026, with a ceiling value of $1,247.45 for a mechanical puller (Lisle Corp. PN 54150 or equal) used for lifting and pulling battery terminal clamps. The puller features a T-handle and two spring-loaded jaws, with overall dimensions of 5 inches length by 4 inches width, and is constructed of steel. Place of performance is Warren, Michigan. The call carries a...

This is a firm fixed-price purchase order awarded by the Defense Logistics Agency (DLA) Aviation to Kell-Strom Tool International, Inc., a small business manufacturer of precision aerospace tooling and ground support equipment based in Wethersfield, Connecticut. The contract has a ceiling value of $2,269.00 and a performance period ending on April 10, 2025. The contract is for the procurement of a PULLER,MECHANICAL (CLIN 8511067567) and does not have a set-aside designation. Kell-Strom Tool...

The U.S. General Services Administration (GSA) Federal Acquisition Service awarded a fixed-price delivery order contract to Idsc Holdings LLC, doing business as Snap-On Industrial, for the supply of a SEPARATOR, LOWER: OVERALL SPREAD: 6-1/8 INCHES USE WITH TAPPED HOLE, TWO-JAW PULLERS OR FLOOR PRESSES SNAP-ON PN CJ952-1A. The potential value of this contract is $1,005.05, with a completion date of March 9, 2024. Idsc Holdings LLC is a division of Snap-On Incorporated, a leading manufacturer of...

The General Services Administration's Federal Acquisition Service awarded a purchase order to Mid-Continent Machining Inc. on July 10, 2026, for $3,400.00 to supply a mechanical puller used to extract the rear bearing cage on an Allison T56A-7 gas turbine engine. The puller features a four-arm aluminum T-handle body, 7-inch length, 1/2-20 NF threaded forcing screw, and four 1/4-28 NF threaded legs. Work is performed in Kansas City, Kansas. The order is firm fixed price with an ultimate...

The Federal Acquisition Service awarded a firm fixed-price purchase order to Lyev, LLC (doing business as MRO Tool Supply) on February 20, 2026, for a Universal Puller Kit valued at $10,533.60. The kit comprises four components designed to remove crankshaft oil seals and dust boots from Detroit Diesel engines, including Series 53, V53, 71, V-71, 92, 110, 149, and 8.2L variants, and features a slide hammer mechanism manufactured by Bosch Automotive Service Solutions. This contract carries no...

This is a definitive contract awarded by the Defense Logistics Agency (DLA) to Johnson & Towers LLC, a for-profit corporation based in Middle River, Maryland. The contract is for the delivery of 373 cylinder heads, with a firm fixed price ceiling value of $1,591,467.91 and a period of performance ending on April 22, 2025. The contract was not set aside for any specific business type. The contract was originated from a Sources Sought Notice (SPRDL1-23-R-0072) posted by DLA, seeking...

This is a firm fixed-price delivery order contract awarded by the Defense Logistics Agency (DLA) Aviation to Bell Textron Inc., a subsidiary of the diversified aerospace and defense conglomerate Textron Inc. The contract, valued at $28,645.63, is for the supply of a JAW, PULLER (National Stock Number 8511275835) with no set-aside designation. Bell Textron Inc. is a key supplier to the U.S. federal government, providing a range of aircraft components, maintenance services, and advanced technology...

This is a firm fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) Land and Maritime to Johnson & Towers LLC, a for-profit corporation based in Middle River, Maryland. The contract, valued at $4,116.20, is for the delivery of a PLATE ASSEMBLY,THRU (NSN 8510677975) with a completion date of November 12, 2024. The contract was awarded on June 12, 2024, and was not set aside for any specific business category. As an experienced prime contractor for DLA, Johnson...

The Defense Logistics Agency Land and Maritime awarded a purchase order to JLG Industries, Inc., on May 20, 2026, for cylinder assembly components valued at $137,297.79 under firm fixed-price terms. The order procures 21 units of Cylinder Assembly, A (NSN 3040014388050) for delivery to DLA Distribution San Joaquin within 168 days. Place of performance is McConnellsburg, Pennsylvania. The procurement was issued without set-aside designation in response to an RFQ posted December 18, 2025, with a...