Aircraft Components and Accessories
Added: Apr 24, 2015 12:10 pm B.01 REMANUFACTURE(a) This is a remanufacture meeting the requirements at FAR 22.1003-6(a)(1). The contractor shall furnish all material, plant facilities, labor, parts, equipment, and expertise necessary to perform the remanufacture required to restore the piece(s) of equipment to original life expectancy, or nearly so. The contractor shall also accomplish all necessary packing and preservation and packaging. ALL work shall be completed in accordance with the requirements specified herein (including attachments hereto) and at the unit price(s) established at the time of award.(b) A Pre-Award Survey and/or Initial Production Evaluation (IPE) may be required. Details are provided in Appendix A,paragraphs 1.2 and 1.3 respectively.(c) Qualification requirements apply. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office @ 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. (d) This acquisition may involve technology that has a military or space application. The only contractors who may participate are those that are certified and registered with the Defense Logistics Information Service (DLIS) (1-800-352-3572) and have a legitimate business purpose. In order to receive any technical data related to this acquisition, offerors must be registered with Federal Business Opportunities (FedBizOpps) www.FBO.Gov. Requests for data are to be submitted to 558cbss.gbhba.psd@tinker.af.mil for Drawings and directly to the PCO and/or buyer for Technical Orders (TOs). The request shall be on company letterhead and include the applicable solicitation number and the specific data needed (e.g. TO number, drawing number). The request must be accompanied by a copy of the current and approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.htmlThe Government is not responsible for incomplete, misdirected, or untimely requests.(e) Failure of the Government to furnish such items in the amounts or quantities described in the Schedule as "estimated" or "maximum" will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract. (f) Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond the remanufacture limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s).(g) Condemned units shall not be counted as production.(h) Offerors must clearly identify all proposed deviations from the solicitation requirements and/or exceptions to the terms and conditions. Offerors must also provi e complete rationale for all proposed deviations and/or exceptions.See section L, paragraph L-03(b) of INSTRUCTIONS, CONDITIONS, AND NOTICES TO RESPONDENTS FOR PROPOSAL PREPARATION USING LOWEST PRICE TECHNICALLY ACCEPTABLE (LPTA) PROCEDURES.(i) Applicable Quality Assurance for line items 0001 - 0004 is Higher Level Contract Quality Requirements as follows: ISO 9001:2000, AS 9100, NATO AQAP 2070, or equivalent.(j) If you believe that any of the Government's required deliveries is unreasonable or not obtainable, provide a schedule your firm considers to be a reasonable, obtainable delivery schedule and include, as an attachment to your response, the information requested at Section L-03(b) of the solicitation. Note: Failure to meet or exceed the Government's required delivery and/or include the information requested at Section L-03(b) may result in the proposal not being considered for award. B.02 ADDITIONAL INFORMATION(a) THIS SOLICITATION CONTEMPLATES AWARD OF A 5-YEAR INDEFINITE DELIVERY/INDEFINITEQUANTITY (ID/IQ) TYPE CONTRACT. ALL QUANTITIES SPECIFIED HEREIN REPRESENT THE TOTAL CONTRACT QUANTITIES FOR ALL FIVE YEARS COMBINED. THE PERIOD OF PERFORMANCE FOR EACH LINE ITEM SHALL EXTEND FROM THE CONTRACTUAL EFFECTIVE DATE THRU FIVE YEARS THEREAFTER OR UNTIL THE MAXIIMUM QUANTITY FOR THE LINE ITEM IS REACHED, WHICHEVER COMES FIRST. (b) There are several long lead time component parts involved with this requirement. The awardee is responsible for securing these parts in a timely manner so as to mee the Government's required delivery schedule. FA8118-15-R-0004 Department of the Air Force Materiel Command Lifecycle Management Center Tinker Air Force Base
4/24/15, 12:10 PM