AIRCRAFT HYDRAULIC, VACUUM, AND DE-ICING SYSTEM COMPONENTS
-- SPRRA116R0337 Department of the Army Materiel Command Aviation and Missile Life Cycle Management Command
2/21/17, 6:20 PM ARM ASSEMBLY, INPUT
Added: Sep 07, 2016 5:46 pm No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHA, Carmen Smith, Contract Specialist, via email carmen.smith@dla.mil or facsimile 256-876-7289. For request for solicitation, provide your name, the company name and CageCode and a telephone/facsimile number.PRON: AX6F6715AX. The Government proposes to acquire, on a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract, a minimum quantity of 75 each up to 675each maximum of an ARM ASSEMBLY, INPUT; NSN: 1650-01-174-8108; Part Number: 2227082-9 applicable to the BE UH-60 Blackhawk weapon system.Production Lead Time without First Article Testing is 75 each, 315 Days After Contract Award (DACA) with deliveries to TEXARKANA, TX 75507-5000This item is restricted to PARKER-HANNIFIN CORPORATION, CAGE CODE: 93835The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part.This part must be acquired from a manufacturing source (s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future solicitations by accessing the website: https://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsar and looking under Standardized Aviation and Missile Source Approval Request (SAMSAR). All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release forsolicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed tough their respective embassies. THIS ACQUISITION CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, USC., SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT (TITLE 50, USC., APP 2401-2402) EXECUTIVE ORDER 12470. THIS INFORMATION CANNOT BE RELEASED OUTSIDE THE UNITED STATES WITHOUT PRIOR APPROVAL OF THE GOVERNMENT. SPRRA1-16-R-0337 Defense Logistics Agency Aviation
9/7/16, 5:46 PM ARM ASSEMBLY, INPUT
Added: Aug 02, 2016 1:27 pm Description:THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources, and if future efforts can be competitive or Set Aside for Small Business. The proposed North American Industry Classification Systems (NAICS) Code is 336413 which has a corresponding Size Standard of 1,250 employees. This SSS is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for the acquisition of ARM ASSY, INPUT, NSN:1650-01-174-8108, Part Number: 227082-9 in support of the UH-60 Blackhawk weapon system. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-1(a)(1) having only a limited number of responsible sources. The Government is interested in all businesses to include 8(a), small business and small disadvantaged business, Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. All contractors must meet prequalification requirements in order to be registered as a potential source. Firms that possess the ability and can produce the required item(s) described above are encouraged to identify themselves. Contractors are encouraged to seek source approval in order to compete for future solicitations by accessing the website: https://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsarthen click on AMCOM Spare Parts Manufacturer or Distributor SARThe contractor shall be capable of successfully performing and complying with any and all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at time of a contract award. The contractor will be responsible for recurring and nonrecurring engineering services associated with becoming a qualified source. The contractor will also be responsible for all aspects of the manufacturing/production process, including but not limited to: supply chain management, logistics, forecasting of parts, long-lead parts procurement, material forecasting, obsolescence issues and final delivery of assets as well as any and all additional costs incurred resulting from contract performance.DISCLAIMER: THIS SSS IS ISSUED SOLELY FOR INFORMATIONAL AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE A SOLICITATION (REQUEST FOR PROPOSAL OR REQUEST FOR QUOTATION) OR A PROMISE TO ISSUE A SOLICITATION IN THE FUTURE AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. SPRRA116R0337 Defense Logistics Agency Aviation
8/2/16, 1:27 PM