Strainer, Sediment
Added: Apr 10, 2017 2:02 pm NSN(s): 4730-01-220-0067STRAINER, SEDIMENT.COPPER NICKEL ALLOY MATERIAL20.9375 INCHES NOMINAL HEIGHT<(>,<)>31.375 INCHES NOMINAL WIDTH.END ITEM-DRAIN PUMP, 5 INCH DUPLEX STRAINER.RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FORSIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THESOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGEACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATEAPPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ONREVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)RQ009: INSPECTION AND ACCEPTANCE AT ORIGINRQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIESSAMPLING:THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQH1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISESPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJORAND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OFVII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIEDATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARESPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURERMAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION ORPER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOTSIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOTUNLESS OTHERWISE SPECIFIED IN THE CONTRACT.MERCURY OR MERCURY CONTAINING COMPOUNDS SHALLNOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECTCONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHEDUNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURYUSED IN BATTERIES, FLUORESCENT LIGHTS, REQUIREDINSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTSCONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAINA SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY ORMERCURY COMPOUND. (IAW NAVSEA 5100-003D).THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TOEXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA ANDELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGHJCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OFSTATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONALAGREEMENTS.TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICALTECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEBADDRESS:https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspxOR BY WRITING TO:DLA LOGISTICS INFORMATION SERVICEFEDERAL CENTER74 WASHINGTON AVE., NORTHBATTLE CREEK, MI 49037-3084TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT ACURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BYTHE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS ANEXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OFGENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA AREREQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENTOR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THEEXPORT CONTROLLED TECHNICAL DATA.NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TOTHEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATAUNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLYPERMITTED BY DODD 5230.25.FULL AND OPEN COMPETITION APPLIES.CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BEUSED NOR INCORPORATED IN ANY ITEMS TO BEDELIVERED UNDER THIS CONTRACT.THIS PROHIBITIONSUPERSEDES ALL SPECIFICATION REQUIREMENTS BUTDOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.SUBSTITUTE CHEMICALS MUST BE SUBMITTED FORAPPROVAL UNLESS THEY ARE AUTHORIZED BY THESPECIFICATION REQUIREMENTS.A CLASSIFIED DRAWING FORMS A PART OF THISDATA PACKAGE AND WILL BE SUPPLIED UPONAWARD FOLLOWING RECEIPT OFCOMPLETED DD FORM 254 FROMTHE CONTRACTING OFFICER.A CONFIDENTIAL DOCUMENT IS INCLUDED IN THETECHNICAL DATA PACKAGE THAT SUPPORTS THISMATERIAL. CONTRACT AWARD FOR THIS ITEM ISLIMITED TO THOSE CONTRACTORS THAT HAVE AVALID AND CURRENT SECURITY CLASSIFICATIONLEVEL OF "CONFIDENTIAL" PRIOR TO AWARD. UPONAWARD OF THE CONTRACT, THE CONTRACTINGOFFICER WILL ARRANGE FOR THE SECURE DISTRIBU-TION OF THIS CONFIDENTIAL DOCUMENT THROUGHTHE DATA DISTRIBUTION OFFICE, DSCC-VTRD,COLUMBUS, OHIO.The Government Procuring Activity has determined that Surplus is notAcceptable for this NSN.(End of TQ Requirement)CRITICAL APPLICATION ITEMIAW BASIC DRAWING NR 80064 4457895REVISION NR L DTD 12/22/1988PART PIECE NUMBER:IAW REFERENCE DRAWING NR 43689 254841REVISION NR G DTD 11/22/1994PART PIECE NUMBER:IAW REFERENCE DRAWING NR 43689 4495462REVISION NR H DTD 09/05/1988PART PIECE NUMBER:IAW REFERENCE QAP 80064 4456141REVISION NR A DTD 02/27/1972PART PIECE NUMBER:IAW REFERENCE DRAWING NR 43689 4456438REVISION NR K DTD 05/12/1989PART PIECE NUMBER:Quantity (including option quantity): 5Unit of Issue: EADestination Information: DLA Distribution New CumberlandDelivery Schedule: 350 daysThe solicitation will be available in FedBizOpps on its issue date of 04/26/2017.The Small Business size standard is 500 employees.Drawings/specifications will be available tough the DIBBS solicitation link in the synopsis on the solicitation issue date.While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.TYPE OF SET-ASIDE: Total Small Business SPE7M317R0004 Defense Logistics Agency Land and Maritime
4/10/17, 2:02 PM strainer, sediment
Added: Jul 05, 2017 1:34 pm STRAINER, SEDIMENT.COPPER NICKEL ALLOY MATERIAL20.9375 INCHES NOMINAL HEIGHT<(>,<)>31.375 INCHES NOMINAL WIDTH.END ITEM-DRAIN PUMP, 5 INCH DUPLEX STRAINER.RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FORSIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THESOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGEACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATEAPPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ONREVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES SAMPLING:THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQH1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISESPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJORAND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OFVII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIEDATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARESPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURERMAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION ORPER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOTSIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOTUNLESS OTHERWISE SPECIFIED IN THE CONTRACT.MERCURY OR MERCURY CONTAINING COMPOUNDS SHALLNOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECTCONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHEDUNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURYUSED IN BATTERIES, FLUORESCENT LIGHTS, REQUIREDINSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTSCONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAINA SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY ORMERCURY COMPOUND. (IAW NAVSEA 5100-003D).THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TOEXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA ANDELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGHJCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OFSTATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONALAGREEMENTS.TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICALTECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEBADDRESS:https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspxOR BY WRITING TO:DLA LOGISTICS INFORMATION SERVICEFEDERAL CENTER74 WASHINGTON AVE., NORTHBATTLE CREEK, MI 49037-3084TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT ACURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BYTHE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS ANEXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OFGENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA AREREQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENTOR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THEEXPORT CONTROLLED TECHNICAL DATA.NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TOTHEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATAUNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLYPERMITTED BY DODD 5230.25.FULL AND OPEN COMPETITION APPLIES.CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BEUSED NOR INCORPORATED IN ANY ITEMS TO BEDELIVERED UNDER THIS CONTRACT.THIS PROHIBITIONSUPERSEDES ALL SPECIFICATION REQUIREMENTS BUTDOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.SUBSTITUTE CHEMICALS MUST BE SUBMITTED FORAPPROVAL UNLESS THEY ARE AUTHORIZED BY THESPECIFICATION REQUIREMENTS.A CLASSIFIED DRAWING FORMS A PART OF THISDATA PACKAGE AND WILL BE SUPPLIED UPONAWARD FOLLOWING RECEIPT OFCOMPLETED DD FORM 254 FROMTHE CONTRACTING OFFICER. A CONFIDENTIAL DOCUMENT IS INCLUDED IN THETECHNICAL DATA PACKAGE THAT SUPPORTS THISMATERIAL. CONTRACT AWARD FOR THIS ITEM ISLIMITED TO THOSE CONTRACTORS THAT HAVE AVALID AND CURRENT SECURITY CLASSIFICATIONLEVEL OF "CONFIDENTIAL" PRIOR TO AWARD. UPONAWARD OF THE CONTRACT, THE CONTRACTINGOFFICER WILL ARRANGE FOR THE SECURE DISTRIBU-TION OF THIS CONFIDENTIAL DOCUMENT THROUGHTHE DATA DISTRIBUTION OFFICE, DSCC-VTRD,COLUMBUS, OHIO.The Government Procuring Activity has determined that Surplus is notAcceptable for this NSN.(End of TQ Requirement)CRITICAL APPLICATION ITEMIAW BASIC DRAWING NR 80064 4457895REVISION NR L DTD 12/22/1988PART PIECE NUMBER:IAW REFERENCE DRAWING NR 43689 254841REVISION NR G DTD 11/22/1994PART PIECE NUMBER:IAW REFERENCE DRAWING NR 43689 4495462REVISION NR H DTD 09/05/1988PART PIECE NUMBER:IAW REFERENCE QAP 80064 4456141REVISION NR A DTD 02/27/1972PART PIECE NUMBER:IAW REFERENCE DRAWING NR 43689 4456438REVISION NR K DTD 05/12/1989PART PIECE NUMBER:Quantity (including option quantity): 5 Unit of Issue: EADestination Information: DLA Distribution New CumberlandDelivery Schedule: 350 daysThe Small Business size standard is 500 employees.TYPE OF SET-ASIDE: Total Small Business SPE7M317R0004 Defense Logistics Agency Land and Maritime
7/5/17, 1:34 PM STRAINER, SEDIMENT
-- SPE7M317R0004 Defense Logistics Agency Land and Maritime
6/28/17, 1:03 PM