Upgrade Automated Waterjet Coating Removal System
Naval Air Systems Command (NAVAIR), Naval Air Warfare Center - Aircraft Division (NAWCAD) has a requirement to procure the upgrade of the Automated Waterjet Coating Removal System located in building 133, Shop 93202, Engine Parts Repair Shop located at Cherry Point, NC 28533 at Fleet Readiness Center East (FRCE). This requirement is defined as the Contractor providing all required services (procurement, transportation, inspection, engineering, installation, removal, rigging, mechanical, electrical, welding, machining, alignment, programming, start-up, testing), parts, tools and materials to successfully perform and complete all required operations. The required operations to upgrade the Automated Waterjet Coating Removal System and/or associated network components include: 1) Install a replacement viewing window. 2) Install new LED light fixtures inside waterjet booth. 3) Stainless Steel cover plates will be installed to cover the dented wall on the interior of the waterjet booth. 4) Install a new robot protective suit. The new robot suit will be attached to the existing blower to purge the suit with air. 5) Install a new mist collector. The new mist collector will be constructed with a stainless steel housing to prevent corrosion. 6) Install a new waterjet pump. A new Jet Edge 60-150 intensifier pump will be provided. 7) Install a new water filter skid. The new bag filter skid will include tee (3) new filters: two (2) 25 micron filters and one (1)10-micron filter. The 25 micron filters will be plumbed in parallel allowing filter bag changes during operation. The filter housing will use a tee swing bolts to seal the housing cover. 8) The PRIMS computer will be upgraded to a Windows10 PC and the PLC will be upgraded to an Allen Bradley SLC 5/05 to enable Ethernet communication with the new PRIMS computer. 9) One week of training will be provided at Cherry Point, NC. The Government intends to procure this requirement as a firm-fixed price contract under the authority of 10 USC 2304(c)(1), as implemented by FAR 6.302-1 by soliciting on a sole source basis to Progressive Surface, Inc. (CAGE: 06EH8). The original design and installation of the Automated Waterjet Coating Removal System located in building 133, Shop 93202, Engine Parts Repair Shop was contracted with Progressive Surface, Inc. Progressive Surface, Inc. owns the data rights to the technical data required for this effort. This notice of intent is not a request for competitive proposals; however, all responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. All responses received by the closing of this synopsis will be considered by the Government. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit an award of a contract. RESPONSES MUST BE RECEIVED IN WRITING PER THE E-MAIL PROVIDED IN THIS POSTING. RESPONSES BY PHONE OR FAX WILL NOT BE ACCEPTED.. N68335-18-R-0249 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
9/11/18, 6:58 AM