USCGC DORADO (WPB-87306) DD
Added: Dec 16, 2011 3:21 pm The United States Coast Guard Surface Forces Logistics Center intends to issue a Commercial Request for Quotation (RFQ) for the dry-dock repairs to USCGC DORADO (WPB-87306). The Coast Guard intends to conduct this procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. In accordance with FAR 52.232-18, the contract will be subject to the availability of appropriated funds. This procurement will be a Small Business (SB) set aside. All responsible SB concerns may submit an offer, which shall be considered by the U.S. Coast Guard. The small business size standard for NAICS 336611 is less than 1,000 employees. The solicitation will be issued electronically as a Best Value Request for Quotation (RFQ) on the Federal Business Opportunities (FedBizOpps) web page at http://www.fbo.gov on or about December 16, 2011 with quotes due on or about January 6, 2012. Please sign up for the Auto Notification Service to receive an e-mail from FedBizOpps when an action is taken under this solicitation. This commercial item requirement is set-aside for SB concerns and will be evaluated where as Past Performance is more important than Price. The home pier of the vessel is located at 100 Anchor Way, Crescent City, CA 95531. The vessel is geographically restricted to the United States West Coast, Columbia River and South. The Period of performance is forty-five (45) calendar days from on or about February 22, 2012 tough April 6, 2012.The contractor shall provide all labor, material and equipment necessary for dry-dock repairs to the USCGC DORADO (WPB-87306). The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC DORADO (WPB-87306). This work will include, but is not limited to:1. Perform Ultrasonic Thickness Measurements2. Perform Ultrasonic Thickness Measurements3. Dirty Oil Tank, Clean and Inspect4. Oily Water Tank, Clean and Inspect5. Tanks (MP Fuel Service), Clean, Blast, and Inspect6. Pilothouse Deck (Aluminum), Inspect , Preserve, and Renew Electrical Matting7. Depth Sounder, Capastic Fairing, Renew8. Main Engine/Reduction Gear, Realign9. Propulsion Shafts, Remove, Inspect, and Reinstall10. Propulsion Shaft, Repair 11. Propulsion Shaft, Straighten12. Intermediate Water-Lubricated Propulsion Shaft Bearing , Renew13. Aft Water-Lubricated Propulsion Shaft Bearing , Renew14. Intermediate Bearing Carrier, Renew15. Aft Bearing Carrier, Renew16. Stern Tube, Interior Surfaces , Preserve 100%17. Stern Tube, Interior Surfaces , Repair18. Propellers, Remove, Inspect, and Reinstall19. Propeller, Minor Reconditioning and Repairs, Perform20. Fathometer Transducer, Renew21. Speed Log, Skin Valve Assembly, Clean and Inspect22. Sea Water System (Sea Valves , Strainers, Piping), Clean, Inspect, and Repair23. Rudder Assemblies, Remove, Inspect and Reinstall24. RHIB Notch Skid Pads, Inspect25. RHIB Notch Skid Pad Studs, Renew26. Stern Launch Door, Remove, Inspect and Reinstall27. Grey Water Holding Tank, Clean and Inspect28. Sewage Holding Tank , Clean and Inspect 29. Grey Water Piping, Clean and Flush30. Sewage Piping, Clean and Flush31. U/W Body, Preserve ("100%")32. U/W Body, Preserve ("Partial - 33%")33. Cathodic Protection / Zincs, Renew34. Drydocking35. Temporary Services, Provide36. Telephone Service, Provide37. Port Transom Ladder and Railing, Renew38. Decks - Exterior (Main Deck), Preserve39. Hull Plating Freeboard, Preserve " 100% "40. Superstructure, Preserve " Partial "41. Mast, Preserve ("100%")42. Exhaust Concentric Rings (MDE), Renew43. Install Dirty Oil Tank Level Indicator (EC 087-B-039) 44. Forepeak, Modify and Preserve45. Deck Covering (Carpeting) , Renew46. Deck Covering (Interior Wet/Dry) , Renew47. Interior Deck Covering System, Reseal48. Fire Station "Camelback" Racks, Modify (TCTO TB3000) 49. Weather Tight Door, Fuel Station, Install (TCTO TB6000) 50. Renew Office Laminate Deck51. Bilge Surfaces (Engine Room), Preserve " Partial "All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Drawings will be available on CD-ROM. The CD-ROM is available free of charge to contractors upon request not later than four (4) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). For information concerning this acquisition, contact Mable Lee at (757) 628-4820 or by e-mail at Mable.L.Lee@uscg.mil. HSCG80-12-Q-P45L33 Department of Homeland Security US Coast Guard
12/16/11, 3:21 PM