Enclose Hangar Door
Added: Oct 08, 2015 11:19 am To furnish all tools, labor, equipment, devices, materials and performing all work required to perform complete construction of new infill insulated metal panel wall system, with personnel door, sectional overhead door and storefront windows in existing hangar door opening at the Air Force Research Laboratory, Rome, NY. FA8751-15-R-0006 Department of the Air Force Materiel Command Research Laboratory
10/8/15, 11:19 AM Enclose Hangar Doors
Added: Feb 13, 2015 11:26 am Enclose Hangar Doors, Building 101, AFRL, Rome Research Site, Rome, New York.The work covered under this Contract consists of furnishing all labor, equipment, devices, and materials and performing all work required to perform complete construction of new infill insulated metal panel wall system, with personnel door, sectional overhead door and storefront windows in existing hangar door opening of Building 101 at Rome Site in accordance with technical specifications and applicable drawings.This acquisition includes, but is not limited to, these principal features:1. Construction of a new infill wall system in the existing hangar door opening at Building 101. Wall system consists of steel columns, girts, and insulated wall panels. Wall includes a sectional overhead door, hollow metal personnel door and storefront window system.2. Incidental electrical work including power to overhead door, door security, and disconnection of existing hangar doors.The applicable NAICS code is 236220 with an associated small business size standard of $36.5M average annual revenue.Note that this Sources Sought Notice is for planning purposes only. The information obtained from responses to this notice may be used to develop an acquisition strategy and future solicitation. The Air Force is considering whether to set aside this Firm Fixed Price (FFP) acquisition for competitive 8(a), HUBZone Small Business (SB), Service Disabled Veteran Owned Small Business (SDVOSB), Woman Owned Small Business (WOSB) or Small Business (SB). If adequate responses are not received, the acquisition may be solicited on a "full and open" basis.If this effort is to be set aside, then a clause such as FAR 52.219-14, Limitations on Subcontracting, will apply and the prime specialty trade contractor will be required to perform a minimum of 25% of the cost of the contract, not including the cost of materials, with its own employees.The estimated magnitude of construction is between $250,000 and $500,000.All interested 8(a); HUBZone SB, SDVOSB, WOSB and SB concerns are invited to respond. In order to be considered, responses must include the following:1. Positive statement of intent to submit a proposal for this solicitation as a prime contractor.2. Evidence of successful completion within the past five (5) years as a prime contractor of at least two (2) projects similar in magnitude and scope to the work described in this notice.3. Past performance information for work cited above to include:(a) Project description detailing the size, scope, complexity, phasing plan, planned and actual budget, planned and actual schedule, tenants that occupied the various buildings, cost control and cost tracking methods, schedule control, coordination, and prime contractor's experience in delivering the completed projects satisfactorily to the end users.(b) Description of methods employed to successfully work within the fixed schedule and prescribed budget.(c) Contract numbers, project titles, dollar amounts, points of contact, and contact information.(d) Description and quantification of work performed by subcontractors.4. With regard to this acquisition, a narrative statement describing the intended responsibilities of the prime contractor and subcontractor(s), what work elements each would accomplish, and how the prime contractor would fulfill the requirement to perform at least 25% of the work (not including the cost of materials) with its own employees.5. Evidence and quantification of bonding and insurance capacity for the work described in this notice.6. Description of Safety and Quality Control methodologies not to exceed 2 pages each.7. Documentation of current 8(a), HUBZone SB, SDVOSB, WOSB or SB status such as SBA certification letter or other evidence. (For more information on the definition or requirements, refer to http://www.sba.gov)NOTE: All of the above must be submitted in sufficient detail for a decision to be made on the availability of interested 8(a), HUBZone SB, SDVOSB, WOSB or SB concerns. Failure to submit all information requested will result in a contractor being considered ‘NOT INTERESTED' in this requirement.Firms that meet the requirements described in this announcement are invited to submit their responses to the attention of Meghan Thomas, Contract Specialist (Meghan.Thomas.1@us.af.mil) with an email copy to John Haberer (John.Haberer@us.af.mil ) and Small Business Specialist (Janis.Norelli@us.af.mil). Responses must be sent by email.All information must be received before 3:00 PM (ET) 23 February 2015 to be considered.Technical questions may be referred to Meghan Thomas, email Meghan.Thomas.1@us.af.milSmall Business program questions may be referred to Janis Norelli, email Janis.Norelli@us.af.milIf a solicitation for this requirement is issued, in order to receive a contract award, the successful offeror must be actively registered in System Award Management (SAM - http://www.sam.gov) and Wide Area Workflow (WAWF - https://wawf.eb.mil).This Sources Sought Notice is not a Request for Proposal (RFP). No solicitation is being issued at this time. This notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. Any information provided to the Government as a result of this Sources Sought Notice is voluntary. Responses will not be returned. No entitlement to payment of direct or indirect costs or charges by the Government will arise as a result of contractor submission of responses or the Government's use of such information. FA8751-15-R-0006 Department of the Air Force Materiel Command Research Laboratory
2/13/15, 11:26 AM Enclose Hangar Door
Added: Aug 05, 2015 9:14 am The work covered under this Contract consists of furnishing all labor, equipment, devices, and materials and performing all work required to perform complete construction of new infill insulated metal panel wall system, with personnel door, sectional overhead door and storefront windows in existing hangar door opening of Building 101 at Rome Site in accordance with technical specifications and applicable drawings.This acquisition includes, but is not limited to, these principal features:1. Construction of a new infill wall system in the existing hangar door opening at Building 101. Wall system consists of steel columns, girts, and insulated wall panels. Wall includes a sectional overhead door, hollow metal personnel door and storefront window system.2. Incidental electrical work including power to overhead door, door security, and disconnection of existing hangar doors.This acquisition will be a 100% Small Business Set-Aside IAW FAR 19.5. The applicable NAICS code is 236220 with an associated small business size standard of $36,500,000 average annual revenue.The estimated magnitude of construction is between $250,000 and $500,000. Offeror must have the capability to provide payment and performance bonding in the amount of its proposal.DRAFT versions of the Project Manual, Drawings, Past Performance Questionnaire, and Solicitation Sections L and M are attached to this notice. Questions and comments are welcome and must be sent to the Contract Specialist Meghan Thomas at Meghan.Thomas.1@us.af.mil.The Request for Proposal (RFP) will be posted online at the Federal Business Opportunities website http://www.fbo.gov under the reference number FA8751-15-R-0006 on or about 24 August 2015. Proposals will be due approximately 30 days later. A site visit will be conducted about 10 days after issuance of the RFP. The date will be finalized when the RFP is posted.The RFP documents only will be available electronically. Potential offerors will be responsible for downloading the RFP documents and for monitoring the website for possible amendments and any additional information.Award will be a firm fixed price (FFP) contract resulting from a competitive negotiated Request for Proposal (RFP). The award decision will be based on Price / Past Performance Tradeoff (PPT) as identified in FAR Part 15 and supplements thereto. It is intended that award will be made to the lowest priced responsible offeror if that offeror's proposal is technically acceptable and receives a past performance rating of Substantial Confidence. The Source Selection Authority shall make an integrated assessment best value award decision if the lowest priced technically acceptable proposal is not rated as Substantial Confidence in the past performance assessment.Interested vendors may register their contact information at the Federal Business Opportunities website under this notice. The list will be available online and is to facilitate subcontracting and teaming opportunities.NOTE: In order to receive a contract award, if issued, the successful offeror must be actively registered in and have their Online Representations and Certifications completed in the System for Acquisition Management (SAM)- www.SAM.gov. Offerors must also be actively registered in Wide Area Workflow (WAWF) - https://wawf.eb.mil.All responsible sources may submit a proposal which shall be considered by the agency. FA8751-15-R-0006 Department of the Air Force Materiel Command Research Laboratory
8/5/15, 9:14 AM