BPA Call GS06FBA701-47QSHA19F1DD7

The U.S. Marine Corps has awarded a fixed-price delivery order contract to Stanley Industrial & Automotive LLC, a division of Stanley Black & Decker, Inc., for the procurement of a set of 29 high-speed steel (HSS) and cobalt HSS twist drills. The drills range in size from 1/16 inch to 1/2 inch, in 1/64 inch increments, and comply with the National Aerospace Standard NAS 907. The $7,082.04 contract was awarded on May 26, 2005, with a period of performance through June 28, 2005. This...

This Blanket Purchase Agreement (BPA) under the GSA's RC2 vehicle was awarded to Wright Tool Company, LLC for the delivery of step drill bits. The solicitation requested a variety of step drill bits ranging in diameter from 0.125 to 0.5 inches, with step increments of 0.03125 inches and a penetration depth of 0.125 inches. The bits were to have a single flute, hex shank sized at 0.25 inches, and be made of high-speed steel. Wright Tool will provide the step drill bits from its Warren, Michigan...

This federal contract award is for the delivery of step drills to the General Services Administration (GSA) Federal Acquisition Service. The prime contractor, Wright Tool Company LLC, will provide step drills with cutting diameters ranging from 0.125 to 0.5 inches in 0.03125-inch increments, for a total of 13 sizes. The drills will have a single flute, hex shank measuring 0.25 inches, and be made of high-speed steel. They will be self-centering and have a step penetration of 0.125 inches. Issued...

This federal contract award was made by a U.S. government agency to prime contractor Kennametal, Inc. The contract is for the delivery of twist drills made of cobalt high-speed steel, in accordance with the National Aerospace Standard NAS 907. The contract has a ceiling value of $2,310.72 and is a fixed-price delivery order with economic price adjustment. The period of performance extends to August 13, 2005. The place of performance is Georgia, USA. This contract does not have a set-aside...

This federal contract award to Kennametal, Inc. by a U.S. government agency is for the delivery of specialized high-speed steel drill bits. The contract, valued at $4,691.40, is a fixed-price delivery order with economic price adjustments. The drill bits are required to meet specific National Aerospace Standard NAS 907 specifications for size, materials, and design. Kennametal, Inc. is the prime contractor for this award, which does not appear to have a set-aside designation. Based on...

The General Services Administration awarded Kaufman Company, Inc. a firm fixed price purchase order to provide drill bits conforming to ASME standards. Under the contract, Kaufman Co will supply twist drill bits with Morse taper shank and tang cutting ends in sizes ranging from 1-3/16 to 1-3/4 inches. The bits must meet specifications for general purpose drills outlined in ASME B94.11M-1993. Performance will take place in Norwood, Massachusetts over a period of approximately three months from...

This is a $2,366.14 fixed-price contract awarded by the Federal Acquisition Service to Wright Tool Company, LLC, a for-profit limited liability company in Warren, Michigan. The contract is a call order under the RC2 Blanket Purchase Agreement and provides a set of 60 ASME B94.11M-1993 compliant twist drill bits, ranging from wire gage sizes 1 to 60, with a 118-degree point angle and high-speed steel construction. The contract does not have a set-aside designation, indicating open market...

This federal contract award is for drill bits to be supplied by Wright Tool Company LLC under the General Services Administration's (GSA) Federal Acquisition Service RC2 Blanket Purchase Agreement vehicle. The drill bits are to meet American Society of Mechanical Engineers specifications for jobbers cutting twist drills with a 1/4 inch diameter, 2-3/4 inch flute length, 4 inch overall length, 1/4 inch shank diameter and straight round shank cutting in a right-hand direction. The prime...

The General Services Administration (GSA) awarded Kaufman Company, Inc. a firm fixed-price purchase order valued at $143.10 to provide drill, twist solid carbide cutting tools meeting ASME B94.11M-1993 specifications. Performance will occur in Norwood, Massachusetts through December 2023. The solicitation requested straight shank drill bits with 5/32-inch diameters, 1-3/8-inch flute lengths, 2-1/2-inch overall lengths, and two flutes. As GSA fulfills property and administrative support needs for...

Grainger was awarded a $29,100 contract by the General Services Administration (GSA) Federal Acquisition Service to provide 1/4-inch high-speed steel pilot drill bits in support of the agency's Maintenance, Repair and Operations program. The contract is a call against Grainger's existing Multiple Award Schedule contract vehicle and has a period of performance from July 18-25, 2023. As the prime contractor, Grainger will deliver the pilot drill bits from its Lake Forest, Illinois facility on a...