BPA Call GS06F9CONS-GSMPNECV8834

The General Services Administration's Federal Acquisition Service awarded a purchase order to May Tool Inc., a women-owned small business, for a torque multiplier valued at $12,128.00 on May 22, 2026. Performance will occur in Paramount, California. The multiplier is rated for 12,000 foot-pounds of torque capacity with a 10.7:1 gear ratio, 3/4-inch square drive at both ends, overall dimensions not exceeding 19 inches in length, 7-43/64 inches in height, and 13 inches in width, with a minimum...

The U.S. General Services Administration's Federal Acquisition Service awarded a $2,680.00 firm fixed-price purchase order to Lyev, LLC (doing business as MRO Tool Supply) on September 18, 2025, for the delivery of a torque wrench multiplier. The equipment specified is a 30-inch overall length multiplier with an output capacity of 4,000 foot-pounds and 5,423 Newton-meters, featuring an audible square drive signal. The unit includes a 1-inch internal square drive on the first end and a 1-1/2-inch...

The Federal Acquisition Service awarded a purchase order to Lyev, LLC (operating as MRO Tool Supply) on January 26, 2026, for the supply of a torque multiplier meeting specific engineering specifications. The unit features a 25-inch overall length with a 3/4-inch square drive first end and 1-inch external gear second end, a 4-to-1 gear ratio, and a 2,000 foot-pound maximum torque capacity. Constructed of steel with chrome coating, the geared design is intended to support mechanical and...

<p>This is a firm fixed-price purchase order issued by the TACOM Life Cycle Management Command, a defense agency, to Hydratight Sweeney Products Co. for the supply of a MULTIPLIER, TORQUE WRENCH. The contract has a ceiling value of $1,692.00 and an ultimate completion date of July 24, 2005. The contract was awarded on July 7, 2005 and does not have a small business set-aside designation.</p>

This is a firm-fixed-price purchase order awarded by the Bureau of Naval Personnel, a defense agency, to the prime contractor Consolidated Devices, Inc. The contract is for a torque wrench multiplier with specific technical requirements, including an overall length of 19 inches, a maximum rated torque capacity of 12,000 foot-pounds, and other detailed specifications. The contract has a ceiling value of $3,891.10 and a completion date of November 12, 2005. Consolidated Devices, Inc. is a...

The U.S. General Services Administration (GSA) Federal Acquisition Service awarded a $3,346.24 firm fixed-price purchase order to Kaufman Company, Inc., a Norwood, Massachusetts-based industrial distributor, for a torque wrench multiplier on April 17, 2026. The equipment specified includes a 20-inch overall length multiplier with a torque capacity of 0 to 2,200 foot-pounds (0 to 2,983 newton-meters), featuring a 1/2-inch square drive internal first end and 1-inch external second end with a...

This is a fixed-price contract with economic price adjustment awarded by the Federal Acquisition Service (FAS), a civilian agency, to Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan. The contract is a Blanket Purchase Agreement (BPA) call under the RC2 Blanket Purchase Agreement, which allows federal agencies to procure tools and supplies on an as-needed basis. The contract is for the delivery of a manual torque multiplier with specific technical...

This firm fixed price delivery order for $683 was awarded by GSA Federal Acquisition Service to Snap-On Industrial, a division of Idsc Holdings LLC, for the delivery of a torque wrench. The wrench has an overall length of 20 inches, input capacity of 200 foot-pounds, and output capacity of 1,200 foot-pounds, with square drive sizes of 1/2 inch and 3/4 inch on its first and second ends respectively. It has a gear ratio of 6.3:1 and torque ratio of 6:1. Place of performance will be Kenosha, WI....

This federal contract award is for the delivery of a torque wrench with specific dimensions and torque multiplication capabilities. The General Services Administration Federal Acquisition Service awarded a $683 firm fixed price delivery order against the Multiple Award Schedule to Snap-On Industrial, a division of Idsc Holdings, LLC. The torque wrench will have an overall length of 20 inches, input capacity of 200 foot-pounds, output capacity of 1,200 foot-pounds, and a gear ratio of 6.3:1...

This federal contract award, identified as GS06Q16GVAM022|47QSHA18F111F, was granted to Wright Tool Company, LLC, a prime contractor based in Warren, Michigan. The contract is for the delivery of a Torque Wrench Multiplier with a maximum torque capacity of 3,200 foot-pounds, a 0.50-inch square drive tang input, and a 1.0-inch square external drive tang output. The multiplier features a directional clutch, 360-degree continuous rotation in both directions, and an angle of turn protractor. This...