BPA Call GS06F4FISB-GSNWM0AD6X

<p>GSA Federal Acquisition Service issued a purchase order to Kaufman Company, Inc. for electric metal cutting shears valued at $1,345.44, awarded August 7, 2026, with completion by September 16, 2026. The shears conform to CID A-A-50459A specification: Type I, Size 3, 12-gauge capacity, angular drive at 90 degrees, 15-inch overall length, maximum 16 pounds, 6-foot maximum cord length, and 3-prong or 2-prong plug. Performance occurs in Norwood, Massachusetts. No set-aside applies.</p>

The General Services Administration (GSA) awarded a delivery order under the Wright Tool Company LLC's Multiple Award Schedule contract for the purchase of bent trimmer shears. The contract calls for the delivery of shears with an overall length of nine inches and a minimum cutting length of four inches, featuring bent handles and steel blades joined by a steel bolt or screw with bushing. Valued at $49,440, the fixed price contract runs from November 22, 2023 through December 2, 2023 and will be...

This firm fixed price contract award from the General Services Administration (GSA) Federal Acquisition Service is for the delivery of electric metal cutting shears meeting specification A-A-50458A. The prime contractor Noble Supply &amp; Logistics, LLC will provide these shears under the GSA RC2 Blanket Purchase Agreement vehicle. The contract value is $437.35. The shears will be used to support GSA programs and will be delivered to locations in Rockland, Massachusetts by November 9, 2023. This...

The General Services Administration Federal Acquisition Service awarded a firm fixed price purchase order valued at $41,910 to Kipper Tool Company of Gainesville, Georgia. The contract calls for the delivery of shears, bent trimmers with an overall length of 12 inches and a tolerance of half an inch. The blades will be chrome-over-nickel plated with one beveled and one sharp pointed end or two sharp pointed ends. The handles will be steel surfaced. This total small business set-aside contract...

The General Services Administration awarded a $36,400 delivery order to National Industries for the Blind, doing business as Nsite, for the provision of metal cutting hand shears. The shears are to have an overall length of 7 inches and a cutting length of 3-1/4 inches, with straight handles made of plastic and stainless steel blades with a titanium nitride coating. Performance will take place in Alexandria, Virginia over an approximately one week period concluding on September 3, 2023. The...

The General Services Administration (GSA) awarded a $43,020 delivery order to LC Industries Inc. to provide 3,100 pairs of bent trimmer shears. The place of performance will be in Durham, North Carolina, and all work must be completed between October 3-6, 2023. This firm fixed price order was issued against an unidentified GSA multiple award schedule contract vehicle. No subcontractors or set aside designations were indicated. GSA's Federal Acquisition Service manages various government-wide...

The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at one hundred ninety-six dollars and five cents for shears, bent trimmers. The contract calls for the delivery of bent trimmers with an overall length of twelve inches and a blade surface treatment of chrome-over-nickel plated. One blade end will be beveled while the other is pointed, or both ends may be pointed. The handles will be made of steel and plated. Place...

The General Services Administration (GSA) awarded a $36,400 delivery order to National Industries for the Blind (NIB), doing business as Nsite, for the provision of metal cutting hand shears. The shears specified in the original solicitation are 7 inches in overall length with a 3-1/4 inch cutting length, feature two sharp points and straight plastic handles, and are made of stainless steel with a titanium nitride blade coating. Performance will take place in Alexandria, Virginia over a period...

GSA awarded a delivery order under an indefinite-delivery/indefinite-quantity contract to National Industries For The Blind for $36 to supply metal cutting shears. The order calls for shears with an overall length of 7 inches, cutting length of 3-1/4 inches, stainless steel blades with a titanium nitride coating, and plastic handles. Performance will occur in Alexandria, Virginia by January 18, 2024. As a set aside award to a qualified nonprofit agency, this delivery order supports GSA's mission...

The General Services Administration (GSA) Federal Acquisition Service awarded a $21,510 delivery order to LC Industries Inc. to provide 3,100 pairs of bent trimmer shears. The place of performance will be in Durham, North Carolina, and all work must be completed between December 4-7, 2023. This firm fixed price order was issued against an unidentified GSA multiple award contract vehicle. No subcontractors or set aside designations were indicated. GSA's Federal Acquisition Service manages...