BPA Call 47QSHA21A000E-47QSSC24F5SL7

This purchase order from the U.S. General Services Administration's Federal Acquisition Service awarded Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC, a $44,190 firm fixed price contract to supply extractor screws. The extractor screws are to be 3/8 inch multi-spline type I extractors accommodating studs or screws with a steel coating and oxide finish, tapered spiral flutes, half inch external hex shank, and intended for use with 3/16 inch drills. Performance will take...

This is a firm fixed-price purchase order awarded by the U.S. Army Aviation and Missile Command (AMCOM) to Emhart Teknologies LLC, a subsidiary of Stanley Black & Decker, Inc. The contract is for the procurement of screw thread insert extractors, in accordance with ASME B47.1-1988 and CID A-A-59158 standards. The extractors are used for unified coarse and fine, as well as spark plug, thread series with a size range of 10 (.190) to 3/8 (.375) inches. The contract has a ceiling value of...

The General Services Administration (GSA) awarded a firm fixed price purchase order valued at $68,740 to Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC, to provide extractor screws. The extractor screws are Type I multi-spline extractors that accommodate studs or screws sized at 5/16 inch and are made of steel. The extractor has an external hex shank of 1/2 inch for use with a 5/32 inch drill. Performance will occur in Kenosha, Wisconsin over a five-day period from...

Supplycore Inc. has been awarded a $36 potential value contract from the General Services Administration (GSA) Federal Acquisition Service to provide Extractor, Screw: Type IV: Tapered Flute Extractor with an overall length of 2-5/8 inches that accommodates 1/8 inch pipe sizes and 1/4 inch and 5/16 inch stud or screw sizes. The steel extractor screw will be delivered under the RC2 Blanket Purchase Agreement vehicle, a multiple award contract that provides GSA client agencies with recurring needs...

This purchase order from the U.S. General Services Administration's Federal Acquisition Service awards Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC, a $122,750 firm fixed price contract to supply extractor screws. Snap-On Industrial will provide type I multi-spline extractors accommodating 3/8 inch studs or screws with steel coating and oxide finish, tapered spiral flutes, half inch external hex shanks for use with 3/16 inch drills. Performance will occur at the prime...

The General Services Administration awarded a firm fixed price purchase order valued at $179.40 to Kaufman Company, Inc. doing business as Kaufman Co Inc. to deliver 25 hex head multi-spline screw extractors for screw sizes ranging from 1/8 to 7/8 inch. The extractors will feature high torque capabilities for removing broken studs, bolts, socket screws, and fittings. Performance will take place in Norwood, Massachusetts over a period of approximately three months concluding in mid-November. No...

Premier & Companies, Inc. was awarded a $10,450 fixed-price with economic price adjustment contract by the General Services Administration (GSA) Federal Acquisition Service to provide Extractor, Screw: Type II: Spiral Flute Extractor under the GSA's RC2 Blanket Purchase Agreement (BPA). The extractor accommodates 5/16 inch or 8 millimeter studs or screws for use in 3/8 inch reversible drills and will be delivered to locations in New York, New York between September 20-October 1, 2023. The...

The U.S. General Services Administration Federal Acquisition Service awarded a firm fixed-price purchase order valued at $66,150 to Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC doing business as Snap-On Industrial. The contract is for the delivery of EXTRACTOR, SCREW P/N: EX6A to support agency programs. As the prime contractor, Snap-On Industrial will perform the work itself at its facility located in Kenosha, Wisconsin. The one-week period of performance is scheduled...

The General Services Administration (GSA) awarded Wright Tool Company, LLC a firm fixed-price purchase order valued at $28,470 to supply extractor, screw: type II: spiral flute extractors. Under the contract, Wright Tool will provide extractors measuring 4-5/8 inches in overall length to accommodate pipes sizes of 1 inch and studs or screws ranging from 1-3/4 to 2-1/8 inches. The steel extractors will be delivered to the prime contractor's facility in Troy, Michigan and must be provided...

This is a firm fixed-price delivery order contract awarded by the U.S. government to Kennametal, Inc., a for-profit organization, for the delivery of an extractor set consisting of nine screw extractors. The contract was awarded on August 4, 2005 and has a ceiling value of $1,109.52. The parts are required to be manufactured in accordance with American Society of Mechanical Engineers (ASME) and Commercial Item Description (CID) standards. The contract does not have a set-aside designation,...