BPA Call 47QSHA19A000G-47QSHA21F1WCP

The General Services Administration awarded Wright Tool Company, LLC a $12,400 fixed price with economic price adjustment contract to deliver screwdriver bits under the RC2 Blanket Purchase Agreement. The contract calls for hexagonal shank, square drive screwdriver bits measuring 1/4 inch at the tip and 9/64 inch overall in length, constructed of steel for manual tool use. Funding comes from the GSA Federal Acquisition Service to supply bits conforming to Commercial Item Description A-A-3153A....

Kipper Tool Company has been awarded a one hundred nineteen dollar fixed price contract with economic price adjustment by the U.S. General Services Administration Federal Acquisition Service to provide screwdriver bits meeting specification CID A-A-3153A. The bits will have a 3/16 inch hex tip, measure between 1-1/8 and 1-3/4 inches in overall length, have a 5/16 inch hex shank width, and be made of steel with a rubber retaining ring. Delivery will occur by July 3, 2021 in Gainesville, Georgia...

The General Services Administration awarded Wright Tool Company, LLC a $164,170 fixed price with economic price adjustment contract to provide insert screwdriver bits under the agency's RC2 Blanket Purchase Agreement vehicle. The bits will meet Torx insert bit design specifications for use with Torx recess screws, featuring a hexagonal male shank on one end and Torx screwdriver point on the other. Wright Tool will manufacture and deliver the bits from its facility in Warren, Michigan by July 29,...

This contract award is for the supply of screwdriver bits that conform to the TORX insert bit design, suitable for use with TORX recess screws. The bits have a hexagonal male shank on one end and a TORX screwdriver point on the other end. The contract was awarded to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan, which specializes in providing a wide range of tools and hardware to the U.S. federal government. The contract has a ceiling value of...

The General Services Administration Federal Acquisition Service awarded a $25,660 firm fixed price delivery order to Idsc Holdings LLC Snap-On Industrial, operating as a division of Snap-On Incorporated, to supply female square drive screwdriver bits. The bits will measure 1/4 inch in internal diameter, 1 inch in overall length, and 1/2 inch in overall width, constructed of steel with a chrome coating. Performance will take place at the contractor's facility in Kenosha, Wisconsin under a...

The General Services Administration Federal Acquisition Service awarded a firm fixed price purchase order valued at sixty-one dollars and fifty cents to Wright Tool Company, LLC for the delivery of female square drive screwdriver bits. Under the contract, Wright Tool will provide hexagonal socket magnetic snap-on screwdriver bits made of steel with a chrome coating. The bits will have a 1/4 inch square drive, be 1 inch in overall length, have a 1/2 inch overall width, and a 1/4 inch distance...

This federal contract award is for the procurement of screwdriver bits, specifically Torq-Set cross tip size 1/4 inch square drive size 5/16 inch, with an overall length of 1-1/4 inches and a hex shank width of 5/16 inch. The items are made of steel with a rust preventative coating and are suitable for power tool use. The contract, awarded by the General Services Administration's Federal Acquisition Service, is a call order under the RC2 Blanket Purchase Agreement with a ceiling value of...

Wright Tool Company, LLC has been awarded a fifty-three dollar delivery order against the GSA Multiple Award Schedule contract vehicle to provide BIT, SCREWDRIVER: TYPE II: CROSS TIP (PH) TIP SZ: #2 OVERALL LENGTH: 1-5/16 INCHES HEX SHANK WIDTH: 1/4 INCH MATERIAL: STEEL manual tools with rubber retaining rings to the GSA Federal Acquisition Service. Performance will occur in Troy, Michigan with all work completed by January 19, 2024. No set-aside provision was specified. As the GSA supports...

The General Services Administration (GSA) awarded Wright Tool Company, LLC a firm fixed price purchase order valued at $61,500 to supply female square drive screwdriver bits. Under the contract, Wright Tool will provide hexagonal socket screwdriver bits measuring 1/4 inch across flats, 1/2 inch in width, and 1 inch in length. The bits will feature a magnetic snap-on design and chrome coating. Place of performance will be Wright Tool's Troy, Michigan facility. The period of performance is from...

The General Services Administration awarded Wright Tool Company, LLC a $543,720 fixed price with economic price adjustment contract to provide insert screwdriver bits under the agency's RC2 Blanket Purchase Agreement vehicle. The bits will meet Torx insert bit design specifications for use with Torx recess screws, featuring a hexagonal male shank on one end and Torx screwdriver point on the other. Wright Tool will manufacture and deliver the bits from its facility in Warren, Michigan by...