Federal contract opportunity SP3300-11-Q-0045 for all other miscellaneous fabricated metal product manufacturing at DLA Acquisition Locations DLA Distribution, response was due Jan 18, 2011.

Due
Solicitation Number
SP3300-11-Q-0045
Contract Number(s)
None listed
Additional Info Link
None listed
Set-Aside
Total Small Business
Synopses View

AWARD NOTICE

DLA Distribution Depot Susquehanna (DDSP), New Cumberland, PA has a requirement to purchase two (2) new mobile barrier systems.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 in conjunction with 13 of the Federal Acquisition Regulations (FAR) as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the solicitation number is SP3300-11-Q-0045.


This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-47 effective 13 Dec 2010 and Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20101216 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2010-39. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil.


This solicitation is 100% set-aside for small Business concerns. The NAICS code applicable to this acquisition is 332999 and the small business size standard is 500 employees.


NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov.


NOTE: This solicitation is being issued as a small business set-aside, which means any concern proposing to furnish a product that it did not itself manufacture must furnish the product of a small business manufacturer. Reference clause FAR 52.219-6 Notice of Total Small Business Set-Aside (June 2003). The Contractor shall identify at CLIN 0001 the small business manufacturer for the products proposed.



CLIN 0001 - Contractor shall supply and deliver two (2) each mobile barrier systems with trailers complete and in accordance with the attached statement of work (SOW), which includes the minimum requirements/salient characteristics.



2 EACH @ $_______________ EACH = $____________________ TOTAL


CONTRACTOR SHALL IDENTIFY THE SMALL BUSINESS MANUFACTURER FOR THE PRODUCT PROPOSED ON THE ABOVE CLIN:


______________________________________________________________



Delivery point is FOB DESTINATION to DLA DISTRIBUTION SUSQUEHANNA, 3rd St., BLDG. 750, NEW CUMBERLAND, PA 17070.



Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449.


PREFERRED METHOD OF PAYMENT IS GOVERNMENT CREDIT CARD:
DO YOU ACCEPT A CREDIT CARD? YES_____ NO _____


The following FAR and DFARS clauses and provisions apply to this acquisition:


FAR 52.212-1 Instructions to Offers-Commercial Items. Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (d) products samples, (e) multiple offers and (h) multiple awards.


FAR 52.215-5 Facsimile Proposals


FAR 52.216-1 Type of Contract
The Government contemplates award of a firm-fixed price contract.


DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999)


Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity's Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an "Agency Level Protest under Executive Order No. 12979." (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer's decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer.
(End of Provision)


DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001)


(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.


(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate.


(c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer.
(End of Provision)


FAR 52.211-6 - BRAND NAME OR EQUAL (AUG 1999)
(a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation.
(b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must-
(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;
(2) Clearly identify the item by-
(i) Brand name, if any; and
(ii) Make or model number;
(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and
(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.
(c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.
(d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation.
(End of provision)


OFFER SUBMISSION INSTRUCTIONS-Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award.


1. Quotations may be submitted in contractor format and shall include:
(1) Company name, address, telephone number, e-mail address, and FAX number
(2) Solicitation number
(3) Unit Price and extended prices for all CLIN(S)
(4) Proposed shipping time
(5) Small Business Manufacture for proposed item
(6) Technical information (as stated below under FAR 13-106-2)
(7) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code
(8) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation)


2. Contractors are required to include a copy of the FAR provision 52.212-3-Offeror Representations and Certifications-Commercial Items and DFAR 252.212-7000-Offeror Representation and Certification-Commercial Items with its proposal or may indicate completion of the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal or to complete the certifications on the internet may result in elimination from consideration for award.


FAR 13-106-2 Evaluation of Quotations or Offers. The Government intends to evaluate quotes in response to this quotation and will award one firm-fixed price contract to the lowest price technically acceptable offeror whose quote represents the total overall lowest price. Therefore to be considered for award offerors are required to submit descriptive literature that clearly indicates the product offered meets the minimum requirements/salient characteristics. This information will be used to determine technical acceptability. Technical information shall be evaluated on a go/no go basis and will not be rated. Any offeror who has been determined acceptable (go) on their technical information will then have its quote evaluated for price.


Technical capability - The minimum criteria for acceptability shall be the submission of descriptive literature that clearly indicates the product being offered .meets the minimum requirements/salient characteristics as stated in the SOW. "Descriptive literature" for this solicitation means catalog cuts, illustrations, drawings, pictures, brochures, or a web address that contains applicable product information. Descriptive literature is required to establish for the purpose of evaluation and award details of the product being offered. This information will be used to determine technical acceptability.



FAR 52.212-4 Contract Terms and Conditions-Commercial Items. Addenda to 52.212-4; the following clauses apply:
FAR 52.247-34 FOB Destination


 


FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders-Commercial Items (in paragraph (b) the following clauses apply:
FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards
FAR 52.219-6 Notice of Total Small Business Set-Aside
FAR 52.219-28 Post Award Small Business Program Rerepresentation
FAR 52.222-3 Convict Labor
FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies
FAR 52.222-21 Prohibition of segregated facilities
FAR 52.222-36 Equal Opportunity
FAR 52.222-36 Affirmative Action for Workers with Disabilities
FAR 52.223-18 Contractor Policy to Ban Text Messaging While Driving
FAR 52.225-13 Restriction on Certain Foreign Purchases
FAR 52.232-33 Payment by Electronic Funds Transfer - Central Contractor Registration
FAR 52.232-36 Payment by Third Party


DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. The following additional clauses/provisions apply:
DFARS 252.203-7000 Requirement Relating to Compensation of Former DoD Officials
DFARS 252.225-7012 Preference for Certain Domestic Commodities
DFARS 252.247-7023 Transportation of Supplies by Sea


DLAD 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007)
(a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract.
(b) Definition.
Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD).
(c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo.
(1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/).
(2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp.
(d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government.
(End of Clause)


Offerors responding to this announcement shall submit their quotations via FAX to Julie Metzger, 717-770-7591 or e-mail to Julie.Metzger@dla.mil. All quotes must be received by JANUARY 18, 2011 AT 3:30 PM EST to be considered for award.


 

Files
Package File Description
Unspecified SOW.docx STATEMENT OF WORK
Place of Performance