Solicitation Number
Contract Number(s)
None listed
Additional Info Link
None listed
No Set-Aside Used
None listed
Department of the Army
Army Contracting Command
ACC - New Jersey
Synopses View

70-3D Scanning Technology for Remote Weapon StationSynopsis:

3D Scanning Technology for Remote Weapon StationSources Sought/Request for Information (RFI) Announcement

This Sources Sought Notice is a Request for Information (RFI) ONLY and shouldnot be construed as a Request for Proposal (RFP) or a commitment by the U.S. Government. The JM&L LCMC Contracting Center, in support of the Project Manager Crew Served Weapons, is seeking information from organizations that possess mature 3D scanning technology. Specifically, the US Army is interested in a mature capability which will output specific azimuth (0 degrees to 360 degrees) and elevation (40 degrees to +80 degrees from horizontal) coordinates of objects detected. The objects in the profile scan will be statically mounted. The detected objects will be comprised of, but not limited to: metals, hard polymers, concrete, wood and composites. The optimal laser detection range shall be from 0m to 15m.

The desire is to affix the 3D scanner on an existing mount or contractor furnished mount capable of rotating and elevating to the values listed above and capturing data points of objects in range. These data points shall be compiled into an exportable text file.

Vendor Questionnaire: The purpose of this questionnaire is to obtain information from industry to assist in the market research. Firms/companies are invited to indicate their interest and capability to satisfy the above requirements by identifying the following items:

1. Company Name2. Company Address / Country Represented / Website3. Company point of contact and phone number4. Business Size (Small/Large & Number of Employees)5. NAICS Code / CAGE Code / DUNS Number6. Commercialitya. ( ) Our product as described above, has been sold, leased or licensed to the general public.b. ( ) Our product as described above, has been sold in substantial quantities, on a competitive basis to multiple state and local governments.c. ( ) None of the above applies. Explain.7. Please provide any additional comments

If your company or organization has an existing commercially available or non-developmental item that meets these requirements, please provide literature or other information relative to the performance, maintenance, and physical characteristics (i.e. size, weight, etc.) of the product to the POC listed below. Classified material will not be accepted.

This data should be sent, if available, at no cost or obligation to the U.S. Government, by 3 February 2011 to Department of the Army, JM&L LCMC Contracting Center. ATTN: Jaye Rivera, CCJM-SW Bldg. 9, Picatinny, NJ 07806-5000; email: jaye.s.rivera@us.army.mil. Hard or electronic copies are acceptable. TELEPHONE RESPONSES AND INQUIRES WILL NOT BE ACCEPTED. Not responding to this publication does not preclude participation in any future RFP or other solicitation (if any is issued).

This is a Sources Sought Notice/Market Survey RFI ONLY and should not be construed as a RFP or a commitment by the U.S. Government. The U.S. Government does not intend to award a contract on the basis of this market survey. All information is to be submitted at no cost or obligation to the U.S. Government. The information collected from this market survey may be used to support any future acquisitions and shall not be disclosed outside of the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any private sector input as a result of this market survey. If a formal solicitation is generated at a later date, a solicitation notice will be published and more detailed requirements will be provided. Respondents will not be notified of the results of this survey or results of information submitted.