Due
Solicitation Number
N68836-13-T-A600_06
Contract Number(s)
N68836-13-P-1006
Additional Info Link
None listed
Set-Aside
Total Small Business
Synopses View

AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N68836-13-T-A600_06 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-66. The associated North American Industrial Classification System (NAICS) code for this procurement is 333618 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-04-17 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be GULFPORT, MS 39501 The FLC - Jacksonville requires the following items, Meet or Exceed, to the following: LI 001: PIPE, EXHAUST, 11083/155-2819, END ITEM IDENTIFICATION TRACTOR, FULL TRACKED, LOW SPEED, ARMY D7RII TRACTOR, RIPPER, MFG: CATERPILLAR. MACHINE IS MIL SPEC UNIT -- S/N ADW00529, MODEL D7R, YEAR 2003., 1, EA; LI 002: HOSE, EXHAUST, 11083/5P-2817, SOLD BY CENTIMETERS, NEED 65. MFG: CATERPILLAR, 1, EA; LI 003: SPACER, RING, END ITEM IDENTIFICATION: TRACTOR, FULL TRACKER, LOW SPEED, 11083/6I-2435, MFG: CATERPILLAR, 9, EA; LI 004: CORE, RADIATOR, 11083/113-9539, MFG: CATERPILLAR, 2, EA; LI 005: CORE, RADIATOR, 11083/109-3622, MFG: CATERPILLAR, 7, EA; LI 006: HOSE, NONMETALLIC, 11083/106-4572, END ITEM IDENTIFICAITON: COOLING GROUP. MFG: CATERPILLAR, 5, EA; LI 007: SEAL, PLAIN, 11083/6I-2431, END ITEM IDENTIFICAITON: COOLING GROUP. MFG: CATERPILLAR, 9, EA; LI 008: TURBO SUPERCHARGER, ENGINE, NON-AIR, 11083/167-9666, END ITEM IDENTIFICATION: COOLING GROUP, DRIVE ROTATION DIRECTION: COUNTERCLOCKWISE, DRIVE TYPE: ENGINE EXHAUST, END ITEM DESCRIPTION: FUEL GROUP; HELM/LEE, PART NAME ASSIGNED BY CONTROLLING AGENCY: NAVY-TURBO SUPERCHARGER ENGINE. MFG: CATERPILLAR, 1, EA; LI 009: COUPLING, SHAFT, RIGID, 11083/3E-4480, MFG: CATERPILLAR, 2, EA; LI 010: HORN, SIGNAL, 24 VOLTS, 11083/174-7876, DOZER IS MIL-SPEC-UNIT, MFG: CATERPILLAR, 1, EA; LI 011: STARTING AID GROUP-ETHER, 11083/164-4445, (ALL PARTS IN GROUP UNDER ONE PRICE), MFG: CATERPILLAR, 1, EA; LI 012: RING, RETAINING, 11083/9W-3301, OUTSIDE DIAMETER: 374.9 MILLIMETERS NOMINAL, RING STYLE: SPIRAL, SPECIAL FEATURES: THICKNESS 2.92 MM; INTERNAL SPIRAL TYPE. MFG: CATERPILLAR, 4, EA; LI 013: SEAL, NONMETALLIC SPECIAL SHAPED, 11083/9X-4586, END ITEM IDENTIFICATION: TRACTOR, FULL TRACKED, LOW SPEED. PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL ASSEMBLY. MFG: CATERPILLAR, 4, EA; LI 014: RING, RETAINING, 11083/3T-5898, OUTSIDE DIAMETER: 332.31 MILLIMETERS NOMINAL, RING STYLE: SPIRAL, SPECIAL FEATURES: THICKNESS 4.75 MM; INTERNAL SPIRAL TYPE. MFG: CATERPILLAR, 4, EA; LI 015: BEARING, PLAIN, SELF-ALIGNING, 11083/7G-7379, STYLE DESIGNATOR: PLAIN BEARING, OUTER RING WITHOUT INSERT AND/OR LINER. WIDTH: 50.5 MILLIMETERS NOMINAL, OUTSIDE DIAMETER: 313.5 MILLIMETERS NOMINAL, PART NAME ASSIGNED BY CONTROLLING AGENCY: BEARING/PLAIN/RADIAL/SPLIT SLEEVE. MFG: CATERPILLAR, 4, EA; LI 016: BEARING, PLAIN, SELF-ALIGNING, 11083/7G-7379, STYLE DESIGNATOR: PLAIN BEARING, OUTER RING WITHOUT INSERT AND/OR LINER. WIDTH: 50.5 MILLIMETERS NOMINAL, OUTSIDE DIAMETER: 313.5 MILLIMETERS NOMINAL, PART NAME ASSIGNED BY CONTROLLING AGENCY: BEARING/PLAIN/RADIAL/SPLIT SLEEVE. MFG: CATERPILLAR, 2, EA; LI 017: SEAL, PLAIN, 11083/2D-1690, END ITEM IDENTIFICATION: 446D, HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL, MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL. MFG: CATERPILLAR, 4, EA; LI 018: SEAL, NONMETALLIC ROUND SECTION, 11083/112-3044, PART NAME ASSIGNED BY CONTROLLING AGENCY: RECTANGULAR SEAL RING, SPECIAL FEATURES: ID 165 MM; AXIAL WIDTH 10 MM, STYLE DESIGNATOR: NON-CIRCULAR. MFG: CATERPILLAR, 4, EA; LI 019: BEARING, SLEEVE, 11083/3T-4244, PART NAME ASSIGNED BY CONTROLLING AGENCY: SPLIT SLEEVE BEARING SHIM, STYLE DESIGNATOR: 17A SPLIT, PLAIN, NO OUTSIDE FLANGES, BODY OUTSIDE DIAMETER: 168.4 MILLIMETERS NOMINAL, BODY INSIDE DIAMETER: 160.4 MILLIMETERS NOMINAL. MFG: CATERPILLAR, 4, EA; LI 020: BEARING, SLEEVE, 11083/3T-4243, PART NAME ASSIGNED BY CONTROLLING AGENCY: SPLIT SLEEVE BEARING SHIM, STYLE DESIGNATOR: 17A SPLIT, PLAIN, NO OUTSIDE FLANGES, BODY OUTSIDE DIAMETER: 180.0 MILLIMETERS NOMINAL, BODY INSIDE DIAMETER: 172.0 MILLIMETERS NOMINAL, CORNER SHAPE: SQUARE ALL CORNERS. MFG: CATERPILLAR, 4, EA; LI 021: O-RING, 11083/5P-5374, PART NAME ASSIGNED BY CONTROLLING AGENCY: O-RING, MATERIAL: RUBBER BUTADIENE NITRILE, CENTER HOLE DIAMETER: 227.97 MILLIMETERS NOMINAL, CROSS-SECTIONAL HEIGHT: 5.33 MILLIMETERS NOMINAL. MFG: CATERPILLAR, 4, EA; LI 022: SEAL, PLAIN, 11083/7T-1151, MFG: CATERPILLAR, 2, EA; LI 023: O-RING, 11083/6V-3263, PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL-O-RING, MANUFACTURERS CODE: 11083; SPECIAL FEATURES: PART OF 127-4826 POWER TRAIN FINAL DRIVE AND BRAKE GROUP, PAGE 10151887, ITEM 46; DESIGN CONTROL REFERENCE: 6V-3263. MFG: CATERPILLAR, 4, EA; LI 024: SEAL, NONMETALLIC SPECIAL SHAPED SECTION, 11083/6V-0273, PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL/ROTATING, SPECIAL FEATURES: SHAFT OD 123.82 MM; SEAL OD 142.88 MM; AXIAL WIDTH 4.1 MM; BORE DIAM 142.73 MM, CROSS-SECTIONAL SHAPE STYLE: OBLONG-SQUARE BASE, MATERIAL: PLASTIC POLYURETHANE OVERALL. MFG: CATERPILLAR, 2, EA; LI 025: PIN, STRAIGHT, HEADLESS, 11083/4T-4875, PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL/ROTATING, SPECIAL FEATURES: SHAFT OD 123.82 MM; SEAL OD 142.88 MM; AXIAL WIDTH 4.1 MM; BORE DIAM 142.73 MM, CROSS-SECTIONAL SHAPE STYLE: OBLONG-SQUARE BASE, MATERIAL: PLASTIC POLYURETHANE OVERALL. MFG: CATERPILLAR, 2, EA; LI 026: BEARING, SLEEVE, 11083/104-1844, MFG: CATERPILLAR, 4, EA; LI 027: TUBE ASSEMBLY, 11083/8E-8433, PART NAME ASSIGNED BY CONTROLLING AGENCY: TRACTOR, FULL TRACKED, LOW SPEED, ARMY D7RII TRACTOR, RIPPER. MFG CATERPILLAR, 1, EA; LI 028: TUBE ASSEMBLY, METAL, 11083/8E-8432, MFG: CATERPILLAR, 1, EA; LI 029: LAMP, INCANDESCENT, 11083/147-0319, PART NAME ASSIGNED BY CONTROLLING AGENCY: SHOCK RESISTANT FLOOD LIGHT, SPECIAL FEATURES: 24 VOLTS; SUSPENDED MOUNTING; INT DT CONNECTOR; 9X-3463 BULB. MFG: CATERPILLAR, 1, EA; LI 030: GUARD, BRUSH, VEHICULAR, 11083/241-0208, PART NAME ASSIGNED BY CONTROLLING AGENCY: GUARD AS REAR. MFG: CATERPILLAR, 1, EA; LI 031: GUARD, BRUSH, VEHICULAR, 11083/241-0207, PART NAME ASSIGNED BY CONTROLLING AGENCY: GUARD AS REAR. MFG: CATERPILLAR, 1, EA; LI 032: CHASSIS BOTTOM GUARD SEAL, 11083/5P-7514, SOLD BY METER, NEED 5 METERS (ONE ROLL), MFG: CATERPILLAR, 1, EA; LI 033: COVER, ACCESS, 11083/318-0640, END ITEM IDENTIFICATION: TRACTOR FULL TRACKED, SLOW SPEED. MFG: CATERPILLAR, 1, EA; LI 034: PIN, STRAIGHT, HEADED, 11083/191-8283, END ITEM IDENTIFICATION: TRACTOR FULL TRACKED, SLOW SPEED. MFG: CATERPILLAR, 2, EA; LI 035: BELT, V, 11083/2P-7333, SPECIAL FEATURES: DRIVING ACCESSORIES. MFG: CATERPILLAR, 1, EA; LI 036: BELT, V, MATCHED SET, 11083/199-2874, OUTSIDE LENGTH: 2565.0 MILLIMETERS NOMINAL, END ITEM IDENTIFICATION: 160-8576 PULLEY-FAN DRIVE, NOMINAL WIDTH: 23.8 MILLIMETERS, BELT QUANTITY: 2, STYLE DESIGNATOR: PLAIN. MFG: CATERPILLAR, 1, EA; LI 037: TUBE ASSEMBLY, 11083/141-7071, MFG: CATERPILLAR, 1, EA; LI 038: TUBE ASSEMBLY, 11083/141-7073, MFG: CATERPILLAR, 1, EA; LI 039: ROD A, SPEC, 11083/6E-1847, MFG: CATERPILLAR, 2, EA; LI 040: BATTERY BOX TOP PLATE, 11083/9W-7547, MFG: CATERPILLAR, 1, EA; LI 041: SWIVEL AND LINK ASSEMBLY, 11083/6Y-3973, MFG: CATERPILLAR, 1, EA; LI 042: DOOR, ACCESS, GENERAL PURPOSE, 11083/194-4227, MFG: CATERPILLAR, 1, EA; LI 043: PLATE ASSEMBLY, 11083/9W-2779, MFG: CATERPILLAR, 1, EA; LI 044: PLATE ASSEMBLY, 11083/9W-2959, MFG: CATERPILLAR, 1, EA; LI 045: PLATE ASSEMBLY, 11083/9W-5207, MFG: CATERPILLAR, 1, EA; LI 046: VALVE, BALL, 11083/8T-6723, END ITEM IDENTIFICATION: USED ON D6H-II-XL TRACKER TRACTOR FUEL LINE GROUP, MFG: CATERPILLAR, 1, EA; LI 047: VALVE, BALL, 11083/8T-6724, END ITEM IDENTIFICATION: USED ON D6H-II-XL TRACKER TRACTOR FUEL LINE GROUP, MFG: CATERPILLAR, 1, EA; LI 048: HOSE ASSEMBLY, NONMETALLIC, 11083/170-3343, MFG: CATERPILLAR, 1, EA; LI 049: MANIFOLD ASSEMBLY, LEAK-FUEL, DIESEL, 11083/170-3344, MFG: CATERPILLAR, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Jacksonville intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Jacksonville is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. 52.232-18 Availability of Funds Fleet Fast Pay This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-60 and DFARS Change Notice 20120724. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm The NAICS code is 333618 and the Small Business Standard is 1,000. FAR 52.247-34, F.o.b. Destination applies 52.212-2 Evaluation - Commercial Items. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.204-10 Reporting Subcontract Awards. 52.219-28 Post-Award Small Business Program Rerepresentation. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 252.211-7003 Item Identification & Valuation (AUG 2008) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.247-7023 Transportation of Supplies by Sea (MAY 2002) 252.247-7023 (iv) Alt III - ALTERNATE III (MAY 2002) 252.247-7023. 252.225-7000: Buy American Act-Balance of Payments Program Certificate 252.232-7010: Levies on Contract Payments 5252.NS-046P: Prospective Contractor Responsibility 52.212-4: Contract Terms and Conditions-Commercial Items 52.212-1: Instructions to Offerors-Commercial Items 52.252-1:Solicitation Provisions Incorporated by Reference 52.252-2: Clauses Incorporated by Reference 52.237-2: Protection of Government Buildings, Equipment, and Vegetation. Prohibition on Contracting with Inverted Domestic Corporations Representation (May 2012) Prohibition on Contracting with Inverted Domestic Corporations (May 2012) Control of Government Personnel Work Product (April 1992) Representation Regarding Conviction of a Felony Criminal Violation Under and Federal or State Law (Mar 2012) Requirements Relating to Compensation of Former DOD Officials (Sep 2011) Buy American Act & Balance of Payments (Oct 2011)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N68836-13-T-A600_06 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-65. The associated North American Industrial Classification System (NAICS) code for this procurement is 333618 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit quotes.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-04-08 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be GULFPORT, MS 39501 The FLC - Jacksonville requires the following items, Meet or Exceed, to the following: LI 001: PIPE, EXHAUST, 11083/1552819, END ITEM IDENTIFICATION TRACTOR, FULL TRACKED, LOW SPEED, ARMY D7RII TRACTOR, RIPPER. MFG: CATERPILLAR, 1, EA; LI 002: HOSE, EXHAUST, 11083/5P-281765, MFG: CATERPILLAR, 1, EA; LI 003: SPACER, RING, END ITEM IDENTIFICATION: TRACTOR, FULL TRACKER, LOW SPEED, 11083/6I2435, MFG: CATERPILLAR, 9, EA; LI 004: CORE, RADIATOR, 11083/113-9539, MFG: CATERPILLAR, 2, EA; LI 005: CORE, RADIATOR, 11083/109-3622, MFG: CATERPILLAR, 7, EA; LI 006: HOSE, NONMETALLIC, 11083/1064572, END ITEM IDENTIFICAITON: COOLING GROUP. MFG: CATERPILLAR, 5, EA; LI 007: SEAL, PLAIN, 11083/61-2431, END ITEM IDENTIFICAITON: COOLING GROUP. MFG: CATERPILLAR, 9, EA; LI 008: TURBO SUPERCHARGER, ENGINE, NON-AIR, 11083/167-9666, END ITEM IDENTIFICATION: COOLING GROUP, DRIVE ROTATION DIRECTION: COUNTERCLOCKWISE, DRIVE TYPE: ENGINE EXHAUST, END ITEM DESCRIPTION: FUEL GROUP; HELM/LEE, PART NAME ASSIGNED BY CONTROLLING AGENCY: NAVY-TURBO SUPERCHARGER ENGINE. MFG: CATERPILLAR, 1, EA; LI 009: COUPLING, SHAFT, RIGID, 11083/9W2344 OR 3E4480, MFG: CATERPILLAR, 2, EA; LI 010: HORN, SIGNAL, 11083/174-7876, MFG: CATERPILLAR, 1, EA; LI 011: STARTING AID GROUP-ETHER, 11083/1644445, MFG: CATERPILLAR, 1, EA; LI 012: CYLINDER SLEEVE, 11083/154938, MFG: CATERPILLAR, 1, EA; LI 013: RING, RETAINING, 11083/9W3301, OUTSIDE DIAMETER: 374.9 MILLIMETERS NOMINAL, RING STYLE: SPIRAL, SPECIAL FEATURES: THICKNESS 2.92 MM; INTERNAL SPIRAL TYPE. MFG: CATERPILLAR, 4, EA; LI 014: SEAL, NONMETALLIC SPECIAL SHAPED, 11083/9X4586, END ITEM IDENTIFICATION: TRACTOR, FULL TRACKED, LOW SPEED. PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL ASSEMBLY. MFG: CATERPILLAR, 4, EA; LI 015: RING, RETAINING, 11083/3T5898, OUTSIDE DIAMETER: 332.31 MILLIMETERS NOMINAL, RING STYLE: SPIRAL, SPECIAL FEATURES: THICKNESS 4.75 MM; INTERNAL SPIRAL TYPE. MFG: CATERPILLAR, 4, EA; LI 016: BEARING, PLAIN, SELF-ALIGNING, 11083/7G7379, STYLE DESIGNATOR: PLAIN BEARING, OUTER RING WITHOUT INSERT AND/OR LINER. WIDTH: 50.5 MILLIMETERS NOMINAL, OUTSIDE DIAMETER: 313.5 MILLIMETERS NOMINAL, PART NAME ASSIGNED BY CONTROLLING AGENCY: BEARING/PLAIN/RADIAL/SPLIT SLEEVE. MFG: CATERPILLAR, 4, EA; LI 017: BEARING, PLAIN, SELF-ALIGNING, 11083/7G7379, STYLE DESIGNATOR: PLAIN BEARING, OUTER RING WITHOUT INSERT AND/OR LINER. WIDTH: 50.5 MILLIMETERS NOMINAL, OUTSIDE DIAMETER: 313.5 MILLIMETERS NOMINAL, PART NAME ASSIGNED BY CONTROLLING AGENCY: BEARING/PLAIN/RADIAL/SPLIT SLEEVE. MFG: CATERPILLAR, 2, EA; LI 018: SEAL, PLAIN, 11083/2D1690, END ITEM IDENTIFICATION: 446D, HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL, MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL. MFG: CATERPILLAR, 4, EA; LI 019: SEAL, NONMETALLIC ROUND SECTION, 11083/1123044, PART NAME ASSIGNED BY CONTROLLING AGENCY: RECTANGULAR SEAL RING, SPECIAL FEATURES: ID 165 MM; AXIAL WIDTH 10 MM, STYLE DESIGNATOR: NON-CIRCULAR. MFG: CATERPILLAR, 4, EA; LI 020: BEARING, SLEEVE, 11083/3T-4244, PART NAME ASSIGNED BY CONTROLLING AGENCY: SPLIT SLEEVE BEARING SHIM, STYLE DESIGNATOR: 17A SPLIT, PLAIN, NO OUTSIDE FLANGES, BODY OUTSIDE DIAMETER: 168.4 MILLIMETERS NOMINAL, BODY INSIDE DIAMETER: 160.4 MILLIMETERS NOMINAL. MFG: CATERPILLAR, 4, EA; LI 021: BEARING, SLEEVE, 11083/3T-4243, PART NAME ASSIGNED BY CONTROLLING AGENCY: SPLIT SLEEVE BEARING SHIM, STYLE DESIGNATOR: 17A SPLIT, PLAIN, NO OUTSIDE FLANGES, BODY OUTSIDE DIAMETER: 180.0 MILLIMETERS NOMINAL, BODY INSIDE DIAMETER: 172.0 MILLIMETERS NOMINAL, CORNER SHAPE: SQUARE ALL CORNERS. MFG: CATERPILLAR, 4, EA; LI 022: O-RING, 11083/5P5374, PART NAME ASSIGNED BY CONTROLLING AGENCY: O-RING, MATERIAL: RUBBER BUTADIENE NITRILE, CENTER HOLE DIAMETER: 227.97 MILLIMETERS NOMINAL, CROSS-SECTIONAL HEIGHT: 5.33 MILLIMETERS NOMINAL. MFG: CATERPILLAR, 4, EA; LI 023: SEAL, PLAIN, 11083/7T1151, MFG: CATERPILLAR, 2, EA; LI 024: O-RING, 11083/6V-3262, PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL-O-RING, MANUFACTURERS CODE: 11083; SPECIAL FEATURES: PART OF 127-4826 POWER TRAIN FINAL DRIVE AND BRAKE GROUP, PAGE 10151887, ITEM 46; DESIGN CONTROL REFERENCE: 6V-3263. MFG: CATERPILLAR, 4, EA; LI 025: SEAL, NONMETALLIC SPECIAL SHAPED SECTION, 11083/6V-0273, PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL/ROTATING, SPECIAL FEATURES: SHAFT OD 123.82 MM; SEAL OD 142.88 MM; AXIAL WIDTH 4.1 MM; BORE DIAM 142.73 MM, CROSS-SECTIONAL SHAPE STYLE: OBLONG-SQUARE BASE, MATERIAL: PLASTIC POLYURETHANE OVERALL. MFG: CATERPILLAR, 2, EA; LI 026: PIN, STRAIGHT, HEADLESS, 11083/4T4875, PART NAME ASSIGNED BY CONTROLLING AGENCY: SEAL/ROTATING, SPECIAL FEATURES: SHAFT OD 123.82 MM; SEAL OD 142.88 MM; AXIAL WIDTH 4.1 MM; BORE DIAM 142.73 MM, CROSS-SECTIONAL SHAPE STYLE: OBLONG-SQUARE BASE, MATERIAL: PLASTIC POLYURETHANE OVERALL. MFG: CATERPILLAR, 2, EA; LI 027: BEARING, SLEEVE, 11083/1041844, MFG: CATERPILLAR, 4, EA; LI 028: TUBE ASSEMBLY, 11083/8E8433, PART NAME ASSIGNED BY CONTROLLING AGENCY: TRACTOR, FULL TRACKED, LOW SPEED, ARMY D7RII TRACTOR, RIPPER. MFG CATERPILLAR, 1, EA; LI 029: TUBE ASSEMBLY, METAL, 11083/8E8432, MFG: CATERPILLAR, 1, EA; LI 030: LAMP, INCANDESCENT, 11083/147-0319, PART NAME ASSIGNED BY CONTROLLING AGENCY: SHOCK RESISTANT FLOOD LIGHT, SPECIAL FEATURES: 24 VOLTS; SUSPENDED MOUNTING; INT DT CONNECTOR; 9X-3463 BULB. MFG: CATERPILLAR, 1, EA; LI 031: GUARD, BRUSH, VEHICULAR, 11083/2410208, PART NAME ASSIGNED BY CONTROLLING AGENCY: GUARD AS REAR. MFG: CATERPILLAR, 1, EA; LI 032: GUARD, BRUSH, VEHICULAR, 11083/2410207, PART NAME ASSIGNED BY CONTROLLING AGENCY: GUARD AS REAR. MFG: CATERPILLAR, 1, EA; LI 033: CHASSIS BOTTOM GUARD SEAL, 11083/5P751416, MFG: CATERPILLAR, 1, EA; LI 034: COVER, ACCESS, 11083/3180640, END ITEM IDENTIFICATION: TRACTOR FULL TRACKED, SLOW SPEED. MFG: CATERPILLAR, 1, EA; LI 035: PIN, STRAIGHT, HEADED, 11083/1918283, END ITEM IDENTIFICATION: TRACTOR FULL TRACKED, SLOW SPEED. MFG: CATERPILLAR, 2, EA; LI 036: BELT, V, 11083/2P7333, SPECIAL FEATURES: DRIVING ACCESSORIES. MFG: CATERPILLAR, 1, EA; LI 037: BELT, V, MATCHED SET, 11083/199-2874, OUTSIDE LENGTH: 2565.0 MILLIMETERS NOMINAL, END ITEM IDENTIFICATION: 160-8576 PULLEY-FAN DRIVE, NOMINAL WIDTH: 23.8 MILLIMETERS, BELT QUANTITY: 2, STYLE DESIGNATOR: PLAIN. MFG: CATERPILLAR, 1, EA; LI 038: TUBE ASSEMBLY, 11083/1417071, MFG: CATERPILLAR, 1, EA; LI 039: TUBE ASSEMBLY, 11083/1417073, MFG: CATERPILLAR, 1, EA; LI 040: ROD A, SPEC, 11083/6E-1847, MFG: CATERPILLAR, 2, EA; LI 041: BATTERY BOX TOP PLATE, 11083/9W-7547, MFG: CATERPILLAR, 1, EA; LI 042: SWIVEL AND LINK ASSEMBLY, 11083/6Y3973, MFG: CATERPILLAR, 1, EA; LI 043: DOOR, ACCESS, GENERAL PURPOSE, 11083/1944227, MFG: CATERPILLAR, 1, EA; LI 044: PLATE ASSEMBLY, 11083/9W2779, MFG: CATERPILLAR, 1, EA; LI 045: PLATE ASSEMBLY, 11083/9W2959, MFG: CATERPILLAR, 1, EA; LI 046: PLATE ASSEMBLY, 11083/9W5207, MFG: CATERPILLAR, 1, EA; LI 047: VALVE, BALL, 11083/8T6723, END ITEM IDENTIFICATION: USED ON D6H-II-XL TRACKER TRACTOR FUEL LINE GROUP, MFG: CATERPILLAR, 1, EA; LI 048: VALVE, BALL, 11083/8T6724, END ITEM IDENTIFICATION: USED ON D6H-II-XL TRACKER TRACTOR FUEL LINE GROUP, MFG: CATERPILLAR, 1, EA; LI 049: HOSE ASSEMBLY, NONMETALLIC, 11083/1703343, MFG: CATERPILLAR, 1, EA; LI 050: MANIFOLD ASSEMBLY, LEAK-FUEL, DIESEL, 11083/170-3344, MFG: CATERPILLAR, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Jacksonville intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Jacksonville is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-60 and DFARS Change Notice 20120724. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm The NAICS code is 333618 and the Small Business Standard is 1,000. FAR 52.247-34, F.o.b. Destination applies 52.212-2 Evaluation - Commercial Items. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.204-10 Reporting Subcontract Awards. 52.219-28 Post-Award Small Business Program Rerepresentation. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 252.211-7003 Item Identification & Valuation (AUG 2008) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.247-7023 Transportation of Supplies by Sea (MAY 2002) 252.247-7023 (iv) Alt III - ALTERNATE III (MAY 2002) 252.247-7023. 252.225-7000: Buy American Act-Balance of Payments Program Certificate 252.232-7010: Levies on Contract Payments 5252.NS-046P: Prospective Contractor Responsibility 52.212-4: Contract Terms and Conditions-Commercial Items 52.212-1: Instructions to Offerors-Commercial Items 52.252-1:Solicitation Provisions Incorporated by Reference 52.252-2: Clauses Incorporated by Reference 52.237-2: Protection of Government Buildings, Equipment, and Vegetation. Prohibition on Contracting with Inverted Domestic Corporations Representation (May 2012) Prohibition on Contracting with Inverted Domestic Corporations (May 2012) Control of Government Personnel Work Product (April 1992) Representation Regarding Conviction of a Felony Criminal Violation Under and Federal or State Law (Mar 2012) Requirements Relating to Compensation of Former DOD Officials (Sep 2011) Buy American Act & Balance of Payments (Oct 2011)

Place of Performance