(YOSE) Pressure Treated Lumber, Red Cedar, and Hardware
Awarded Award Notice Posted
- Solicitation number
- P16PS01808
- Agency
- National Park Service Department of the Interior
- Awarded
- to Matheus Lumber Company, Inc.
- Set-aside
- Total Small Business
Opportunity facts
- Contract number
- INP16PX02494 Federal contract award
- NAICS code
- 321113 Sawmills
- PSC
- Not on record
- More information
Notice details come from SAM.gov. Updated .
Notice text
4 versions
Update #4 · Latest ·
Added: Jun 28, 2016 6:26 pm
Modified: Jul 13, 2016 3:30 pmTrack Changes
Pressure Treated Lumber, Red Cedar Lumber, and Hardware for Bridge Decking Material for the Road and Trails Branch at Yosemite National Park, Mariposa County, California.
This amendment is to provide answers to the following questions:
Q1) With respect to surfacing, are you seeking 'rough' timbers or 'surfaced' also known as S4S?
A1) Pressure treated is standard sawn.
Q2) With respect to dimensions, are you seeking 'full sawn' -- timbers would measure 'actual' measurements specified or 'standard' sawn - which allows about less than measurement specified depending on size.
A2) Cedar is actual sawn. Not sanded and full dimension.
Q3) Paragraph B says pressure treated Lumber grad one or better, Paragraph C says Red Cedar shall not be pressure treated, can clarify this?
A3) Paragraph C is a different required and wood type. Red Cedar is rough sawn full dimension, clear (no knots) lumber NOT treated. All other lumber is pressure treated grade number one or better and typically dug fir.
Update #3 ·
Added: Jun 28, 2016 6:26 pm
Modified: Jul 06, 2016 4:57 pmTrack Changes
Pressure Treated Lumber, Red Cedar Lumber, and Hardware for Bridge Decking Material for the Road and Trails Branch at Yosemite National Park, Mariposa County, California.
This amendment is to provide answers to the following questions:
Q1: Does the Buy American Act apply to this buy?
A1: It does not apply as this is a small business set aside.
Q2: What Specie (Doug-Fir, Hem-Fir)? What is the treatment spec? Is there a Min. Moisture content? If Fire treated Exterior or Interior Treatment?
A2: Pressure treated suited for wetland areas. We want pressure treated over fire rated. Doug fir for wood type. No minimum moisture content, should be consistent with standard moisture content for pressure treatment process.
Update #2 ·
Added: Jun 28, 2016 6:26 pm
Modified: Jul 05, 2016 3:15 pmTrack Changes
Pressure Treated Lumber, Red Cedar Lumber, and Hardware for Bridge Decking Material for the Road and Trails Branch at Yosemite National Park, Mariposa County, California.
This amendment is to provide answers to the following questions:
Q1. I see the grade and the fact it is pressure treated -- however, nothing regarding specie. Can you identify please?
A1. Doug fir or better.
Q2. Could you also be more specific with regard to treatment? There is mention of being fire retardant, in 'normal pressure treated lumber', there is no fire retardant characteristic - therefore, it would need to be treated with fire retardant chemical to be so. QPL certified?
A2. Treated so it still may be used/recommended for water way areas requiring minimum leaching aspects from materials.
Q3. Item 11 under hardware identifies '500 3/8" NUTS, WASHER, SPLIT WASHER': IS THIS 500 EACH?
A3. Yes 500 each.
Q4. Items 16, 17, 18 identify '2000 each 3/8" nuts, 3/8" flat washer, 3/8" split washer': IS THIS A DUPLICATE OF ITEM 11? IN TOTAL, YOU WANT 2500 OF EACH?
A4. Yes in total 2,500 of each item (See Revised Specifications).
Q5. For the Cedar, you say free of knots - which means CLEAR in lumber terms. Would you accept 'TIGHT KNOT' CEDAR? It is a milled grade that is not as expensive, however, perfectly functional.
A5. We want free/clear on cedar for bridge signs.
Q6. For the timbers - we do not know whether you are wanting 'S4S' (surfaced) or rough timbers - and/or full sawn (like the Cedar) or standard sawn?
A6. Rough sawn timbers.
Q7. For timber do you want 'S4S' (surfaced) or rough timbers - and/or full sawn (like the Cedar) or standard sawn?
A7. Standard Sawn.
Q8. Does the Pressure Treated lumber need to be brown?
A8. Does not need to be brown, lighter color or more natural wood color preferred.
Q9. Can you confirm that on hwy 140, trucks can¿t be longer than 45 feet in length? Also, coming in on the 140 from the east, trucks over 45' need to be escorted?
A9. No trucks over 45 feet due to turning radius over bridges.
Update #1 ·
Added: Jun 28, 2016 6:26 pm Pressure Treated Lumber, Red Cedar Lumber, and Hardware for Bridge Decking Material for the Road and Trails Branch at Yosemite National Park, Mariposa County, California.
Notice history
| Notice | Type | Posted |
|---|---|---|
| (YOSE) Pressure Treated Lumber, Red Cedar Lumber | Award Notice | |
| (YOSE) Pressure Treated Lumber, Red Cedar, and Hardware | Award Notice |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity