Vertical Turning Center (VTC
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W911KF-21-Q-0069
- Agency
- ACC Warren Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- 3416 Lathes
- Place of performance
- Anniston, Alabama 36201, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Contracting Command Detroit Arsenal seeks proposals to supply a new computer numerical controlled vertical turning center. The solicitation specifies requirements for the machine to have a heavy duty cast or molded frame, box ways induction hardened and Turcite coated, two precision spindle bearings, flood coolant system, coolant gun, through tool coolant, work light, and splash guard enclosure. Proposals will be evaluated based on price and technical acceptability, with award made to the lowest price technically acceptable offer. Proposals must be submitted no later than September 22, 2021 to be considered under solicitation number W911KF-21-Q-0069.
This requirement has been set aside for total small business concerns. The primary NAICS code is 333512, with PSC code 3440. One vertical turning center will be procured for use at Anniston Army Depot in Anniston, Alabama by December 31, 2021. The place of performance is specified as Anniston, AL.
Notice text
3 versions
Update #3 · Latest ·
The purpose of thei amendment is to add attachment 9. LAYOUT - CNC Vertical Turning Center (see attachment for details)
The purpose of Amendment 0001 is to remove the 8a designation from this solicitation. block 10 on the STANDARD FORM 1449. This aquisition is set aside 100% for Small Business.
The CNC VTC shall be new and one of the manufacturer’s current models capable of operation in accordance with the requirements herein. The machine will be a Heavy Duty cast or molded frame (not a welded steel frame). The CNC VTC shall be capable of operation in manual, semi-automatic, or fully automatic cycle. The turning center shall use standard ISO programming format for computer numerical controlled machine tools. It will include all required software and hardware necessary to program and operate the CNC VTC from the machine’s control panel. The CNC control will accept programs from an off-line programming system. The CNC VTC shall have box ways which are induction-hardened and Turcite coated on the linear axes. The machine shall have two precision spindle bearings – one thrust and one radial. Included should be a flood coolant system, coolant gun, through tool coolant system, work light, splash guard enclosure, spare parts list, maintenance and instruction manuals, standard set of wrenches and keys for the CNC VTC and its accessories. All parts subject to wear, breakage, or distortion shall be accessible for adjustment, replacement, and repair.
Update #2 ·
The purpose of Amendment 0001 is to remove the 8a designation from this solicitation. block 10 on the STANDARD FORM 1449. This aquisition is set aside 100% for Small Business.
The CNC VTC shall be new and one of the manufacturer’s current models capable of operation in accordance with the requirements herein. The machine will be a Heavy Duty cast or molded frame (not a welded steel frame). The CNC VTC shall be capable of operation in manual, semi-automatic, or fully automatic cycle. The turning center shall use standard ISO programming format for computer numerical controlled machine tools. It will include all required software and hardware necessary to program and operate the CNC VTC from the machine’s control panel. The CNC control will accept programs from an off-line programming system. The CNC VTC shall have box ways which are induction-hardened and Turcite coated on the linear axes. The machine shall have two precision spindle bearings – one thrust and one radial. Included should be a flood coolant system, coolant gun, through tool coolant system, work light, splash guard enclosure, spare parts list, maintenance and instruction manuals, standard set of wrenches and keys for the CNC VTC and its accessories. All parts subject to wear, breakage, or distortion shall be accessible for adjustment, replacement, and repair.
Update #1 ·
The CNC VTC shall be new and one of the manufacturer’s current models capable of operation in accordance with the requirements herein. The machine will be a Heavy Duty cast or molded frame (not a welded steel frame). The CNC VTC shall be capable of operation in manual, semi-automatic, or fully automatic cycle. The turning center shall use standard ISO programming format for computer numerical controlled machine tools. It will include all required software and hardware necessary to program and operate the CNC VTC from the machine’s control panel. The CNC control will accept programs from an off-line programming system. The CNC VTC shall have box ways which are induction-hardened and Turcite coated on the linear axes. The machine shall have two precision spindle bearings – one thrust and one radial. Included should be a flood coolant system, coolant gun, through tool coolant system, work light, splash guard enclosure, spare parts list, maintenance and instruction manuals, standard set of wrenches and keys for the CNC VTC and its accessories. All parts subject to wear, breakage, or distortion shall be accessible for adjustment, replacement, and repair.
Attachments
| File | Type | Posted |
|---|---|---|
| W911KF-21-Q-0069 0002 Layout.pdf | ||
| 9. LAYOUT - CNC Vertical Turning Center.pdf | ||
| W911KF-21-Q-0069 0001.pdf | ||
| 4. SioanForm380-2 Personal Data Questionnaire.pdf | ||
| 1. Statement of Work.pdf | ||
| 2. Evidence of Authority To Sign Offers.pdf | ||
| 6. DD Form 1423 Contract Data Requirement List.pdf | ||
| 7. DD Form 1664 Data Item Description.pdf | ||
| 8. ACC-ANAD COVID Letter.pdf | ||
| W911KF-21-Q-0069 - Solicitation.pdf | ||
| 3. Request for Technical Literature.pdf | ||
| 5. Past Performance Questionnaire.pdf |
Show all 12
Notice history
| Notice | Type | Posted |
|---|---|---|
| Vertical Turning Center (VTC | Award Notice | |
| Vertical Turning Center (VTC | Solicitation | |
| Vertical Turning Center (VTC | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity