Vertical Lift Module System
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- FA671220Q0003VL
- Agency
- Reserve Command Air Force, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 337215 Showcase, Partition, Shelving, and Locker Manufacturing
- Place of performance
- Coraopolis PA 15108 USA
Notice details come from SAM.gov. Updated .
Notice text
8 versions
Update #8 · Latest ·
8/21/2020 - Amendment#4: Additional Information; refer to attached MS Word document. Any questions in response to this amendment must be submitted by August 24th at noon EST. Please send any additional questions to jay.de_leonibus@us.af.mil AND cc jessica_lyn.rasmussen@us.af.mil
8/20/2020 - Amendment#3: Extending solicitation until August 27, 2020 by 04:00 pm EDT.
8/18/2020 - Amendment#2: Additional Information; Materials to be lifted include but are not limited to, pallets of material, barrels, mobile tool chests. Equipment used to load items on to the lift include industrial pallet jack, power pallet jack, dolly. The lift will be mounted via surface mount. The loading/unloading configuration is 90 degree configuration. The doors leading to the install site is a large garage door. The clearance above the upper-level floor and the lowest overhead obstruction (i.e. ceiling, beams, sprinklers, etc) is 11' (feet) and the travel distance between each floor is 11' (feet). Opening dimensions (4'x6'x8') -Mezzanine/Open Area. The remaining information is included in solicitation.
8/17/2020 - Amendment#1: Extended solicitation by 2 days; Updated Date Offers are Due: Aug 20, 2020 04:00 pm EDT
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/27/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Update #7 ·
8/21/2020 - Amendment#4: Additional Information; refer to attached MS Word document.
8/20/2020 - Amendment#3: Extending solicitation until August 27, 2020 by 04:00 pm EDT.
8/18/2020 - Amendment#2: Additional Information; Materials to be lifted include but are not limited to, pallets of material, barrels, mobile tool chests. Equipment used to load items on to the lift include industrial pallet jack, power pallet jack, dolly. The lift will be mounted via surface mount. The loading/unloading configuration is 90 degree configuration. The doors leading to the install site is a large garage door. The clearance above the upper-level floor and the lowest overhead obstruction (i.e. ceiling, beams, sprinklers, etc) is 11' (feet) and the travel distance between each floor is 11' (feet). Opening dimensions (4'x6'x8') -Mezzanine/Open Area. The remaining information is included in solicitation.
8/17/2020 - Amendment#1: Extended solicitation by 2 days; Updated Date Offers are Due: Aug 20, 2020 04:00 pm EDT
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/27/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Update #6 ·
8/20/2020 - Amendment#3: Extending solicitation until August 27, 2020 by 04:00 pm EDT.
8/18/2020 - Amendment#2: Additional Information; Materials to be lifted include but are not limited to, pallets of material, barrels, mobile tool chests. Equipment used to load items on to the lift include industrial pallet jack, power pallet jack, dolly. The lift will be mounted via surface mount. The loading/unloading configuration is 90 degree configuration. The doors leading to the install site is a large garage door. The clearance above the upper-level floor and the lowest overhead obstruction (i.e. ceiling, beams, sprinklers, etc) is 11' (feet) and the travel distance between each floor is 11' (feet). Opening dimensions (4'x6'x8') -Mezzanine/Open Area. The remaining information is included in solicitation.
8/17/2020 - Amendment#1: Extended solicitation by 2 days; Updated Date Offers are Due: Aug 20, 2020 04:00 pm EDT
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/27/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Update #5 ·
8/20/2020 - Amendment#3: Extending solicitation until August 27, 2020 by 04:00 pm EDT.
8/18/2020 - Amendment#2: Additional Information; Materials to be lifted include but are not limited to, pallets of material, barrels, mobile tool chests. Equipment used to load items on to the lift include industrial pallet jack, power pallet jack, dolly. The lift will be mounted via surface mount. The loading/unloading configuration is 90 degree configuration. The doors leading to the install site is a large garage door. The clearance above the upper-level floor and the lowest overhead obstruction (i.e. ceiling, beams, sprinklers, etc) is 11' (feet) and the travel distance between each floor is 11' (feet). Opening dimensions (4'x6'x8') -Mezzanine/Open Area. The remaining information is included in solicitation.
8/17/2020 - Amendment#1: Extended solicitation by 2 days; Updated Date Offers are Due: Aug 20, 2020 04:00 pm EDT
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/20/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Update #4 ·
8/17/2020 - Amendment#1: Extended solicitation by 2 days; Updated Date Offers are Due: Aug 20, 2020 04:00 pm EDT
8/18/2020 - Amendment#2: Additional Information; Materials to be lifted include but are not limited to, pallets of material, barrels, mobile tool chests. Equipment used to load items on to the lift include industrial pallet jack, power pallet jack, dolly. The lift will be mounted via surface mount. The loading/unloading configuration is 90 degree configuration. The doors leading to the install site is a large garage door. The clearance above the upper-level floor and the lowest overhead obstruction (i.e. ceiling, beams, sprinklers, etc) is 11' (feet) and the travel distance between each floor is 11' (feet). Opening dimensions (4'x6'x8') -Mezzanine/Open Area. The remaining information is included in solicitation.
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/20/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Update #3 ·
8/17/2020 - Amendment#1: Extended solicitation by 2 days; Updated Date Offers are Due: Aug 20, 2020 04:00 pm EDT
8/18/2020 - Amendment#2: Additional Information; Materials to be lifted include but are not limited to, pallets of material, barrels, mobile tool chests. Equipment used to load items on to the lift include industrial pallet jack, power pallet jack, dolly. The lift will be mounted via surface mount. The loading/unloading configuration is 90 degree configuration. The doors leading to the install site is a large garage door. The clearance above the upper-level floor and the lowest overhead obstruction (i.e. ceiling, beams, sprinklers, etc) is 11' (feet) and the travel distance between each floor is 11' (feet). Opening dimensions (4'x6'x8') -Mezzanine/Open Area.
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/20/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Update #2 ·
8/17/2020 - Extended solicitation by 2 days; Updated Date Offers are Due: Aug 20, 2020 04:00 pm EDT
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/20/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Update #1 ·
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on Contract Opportunities (beta.SAM.gov). The Request For Quote (RFQ) number is FA671220Q0003VL. This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-06. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 337215 and the Small Business Standard is 250 Employees
The proposed contract is 100% set aside for Small Business concerns.
Award shall be made on the evaluation basis of Lowest Price Technically Acceptable.
The Pittsburgh 911th Airlift Wing located in Coraopolis, PA is seeking quotes from Small Business for the following:
The Vertical Lift storage system will provide reduced labor costs and space savings while improving ergonomics, parts handling, and productivity. Save Space by utilizing overhead cube, by storing to the maximum OSHA height
Capabilities:
Vertical Lift Module design must have an access opening equipped with an automatic shutter door. A robust sheet metal construction to ensure that the operator area and extractor shaft are completely separated during the extractor vertical run, the shutter door remains closed. It must only open when required Tray is moved from the extractor into the access opening. To eliminates inadvertent safety interruption, maximum user safety, reduced air pump effect, healthier work conditions, high lift speed and short waiting times, and less noise.
General Features:
KardexRemstar (Shuttle®) Vertical Lift Module or Equal
Height – not to exceed 23.2 ft.
Width –– not to exceed 110 in.
Depth – not to exceed 121 in.
Weight – not to exceed 12,000 lbs.
Table height – not to exceed 36 inches.
Lifting speed – Minimum, 140 ft. /min
Extractor Speed – Minimum, 20 in/sec
Power – 208-240 Volts 3-Phase
Provide - unit operations and maintenance training
SAFETY FEATURES:
Positively-engaged tray guidance, the extractor drive locates and guides trays on the extractor at up to four points. Ensure that the tray is positively engaged at all times, with predictable accuracy and uptime and to keep the operator safe.
Tooth drive belt - The toothed belt drive has six-point loads of contact. Works to safely distribute the load
Additional Features:
Divider trays- of multiple sizes, for varying pieces of equipment.
Essential characteristics an equivalent must meet:
-Must have Toothed Drive Belt – to provide faster travel and access, lower noise and great longevity thank cables and chains
- Automatic Shutter Doors – reduce noise and provide operator Safety
- 100% - One inch Incremental Storage in entire Unit – allow every inch of storage to be maximized.
- Must have a hinged access door with built in service ladder for fast service and maintenance.
- Must have an access lighting lamp above the workstation in the access opening to illuminate the working area.
- Must have ergonomic tray delivery system to allow trays to be delivered at various heights based on the operator’s comfort level. Set by log-in password preferences.
- Weight Management module allows optimization strategies to keep track of the weight of material by shelf and device to ensure weight limits are not exceeded.
- Factory deliver, assembly and set up.
- Must have a Local Dealer for system Support 24 hours per day, 7 days a week
- Height – not to exceed 23.2 ft.
- Width –– not to exceed 110 in.
- Depth – not to exceed 121 in.
- Weight – not to exceed 12,000 lbs.
- Table height – not to exceed 36 inches.
- Lifting speed – Minimum, 140 ft. /min
- Extractor Speed – Minimum, 20 in/sec
- Power – 208-240 Volts 3-Phase
- Provide - unit operations and maintenance training
Requirements:
Refer to FAR 52.211-6 for guidance on what an "equal" quote must contain. Any quote offering an "equal" Vertical Storage Lift must comply with the requirements in 52.211-6 to be considered. Quote submissions for an "equal" Vertical Storage Lift must clearly demonstrate how the "equal" Vertical Storage Lift meets the essential Salient characteristics described above. Quotes that do not show this will be deemed non-responsive and not considered for award.
FAR CLAUSES AND PROVISIONS
52.202-1, Definitions
52.204-7, System for Award Maintenance
52.204-13, SAM Maintenance
52.209-5, Certification Regarding Responsibility Matters
52.211-6, Brand Name or Equal
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.211-17, Delivery of Excess Quantities
52.212-1, Instructions to Offerors - Commercial Items
52.212-4, Contract Terms and Conditions - Commercial Items
52.219-27, Notice of Service-Disabled Veteran Owned Small Business Set-Aside
52.219-28, Post Award Small Business Program
52.232-39, Unenforceability of Unauthorized Obligations
52.232-11, Extras
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-4 Applicable Law for Breach of Contract Claim
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.252-2 Clauses Incorporated by Reference
52.252-6, Authorized Deviations in Clauses
52.212-5, Contract Terms and Conditions Required to Implement Statutes or
Executive Orders - Commercial Items including: 52.203-6 Restrictions on
Subcontractor sales to the Government, 52.204-10 Reporting Executive
Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the
Government's Interest When Subcontracting with Contractors Debarred,
Suspended, or Proposed for Debarment, 52.219-8 Utilization of Small
Business Concerns, 52.219-28 Post Award Small Business Program
Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation
with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities,
52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Veterans,
52.222-36 Equal Opportunities for Workers w/ Disabilities, 52.222-40
Notification of Employee Rights Under the National Labor Relations Act,
52.222-50 Combating Trafficking in Persons, 52.222-54 Employment Eligibility
Verification, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging
Contractor Policies to Ban Test Messaging While Driving, 52.225-13
Restrictions on Certain Foreign Purchases.
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD
Officials
252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.211-7003 Item Identification and Valuation
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001, Buy American Act & Balance of Payments Program
252.225-7002, Qualifying Country Sources as Subcontractors
252.225-7036, Buy American Act, Free Trade Agreements, Balance of
Payments Program
252.225-7048, Export Controlled Items
252.232-7003, Electronic Submission of Payment Requests and receiving Reports
252.232-7006, Wide Area Workflow Payment Instructions
252.232-7010, Levies on Contract Payments
252.244-7000, Subcontracts for Commercial Items
AFFARS Clauses
5352.201-9101, Ombudsman
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances
This announcement will close at 4:00 PM EST local time
on 08/18/2020. Contact Jay De Leonibus who can be
reached by email at jay.de_leonibus@us.af.mil
Oral communications are not acceptable in response to this
notice.
52.212-2, Evaluation - Commercial Items is applicable to this procurement.
The Government will award a contract resulting from this solicitation to the
responsible vendor whose quote conforming to the solicitation will be most
advantageous to the Government, price and other factors considered. Quotes
will be evaluated based on the following criteria:
- Technical Acceptability
- Price
Technical Evaluation Ratings:
Rating:
Description:
Acceptable
Submission Clearly meets the essential salient characteristics
Unacceptable
Submission does not clearly meet the salient characteristics
System for Award Management (SAM): Vendors must be registered in the
SAM database to be considered for award. Registration is free and can be
completed on-line at http://www.sam.gov/.
Method of quote submission: email to jay.de_leonibus@us.af.mil
All quotes shall include price(s), a point of contact, name and phone number,
CAGE Code, business size under NAICS Code 337215, and payment terms.
Each response must clearly indicate the capability of the vendor to meet all
specifications and requirements.
Attachments
| File | Type | Posted |
|---|---|---|
| Notice IDFA671220Q0003VL.docx | DOCX document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Vertical Lift Module System | Award Notice | |
| Vertical Lift Module System | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity