Valve, globe

THIS IS AN INDEFINITE DELIVERY CONTRACT (IDC) SOLICITATION FOR A SINGLE NSN: 4820-00-483-0695

ITEM DESCRIPTION: VALVE, GLOBE

MAXIMUM VALUE: $249,999.99.

QTY ranges from 50 each to 3,100 each

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN

DELIVERY DATE: 120 DAYS ADO OR BETTER OFFER

FIRST DESTINATION TRANSPORTATION PROGRAM APPLIES

AMC/AMSC = 1/G

VALVE, GLOBE
1/2 INCH VALVE SIZE. IN-LINE STOP TYPE, CLASS A.

A metal casting process was identified as a means to manufacture this
item.   Tooling is required to produce a casting.  For sourcing,
tooling, materials or other information, please contact the appropriate
assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land
& Maritime Supply Chains) DSCC.cast.forge@dla.mil

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.

AN IDENTIFICATION PLATE SHALL BE SECURELY ATTACHED TO EACH VALVE SHOWING
CID 882057031. IN ACCORDANCE WITH NAVAL SEA SYSTEMS COMMAND DRAWING,
WITH THE FOLLOWING EXCEPTIONS: BUNA-N BONNET O-RING SHALL BE PACKED IN A
BAG AND SECURELY ATTACHED TO EACH VALVE WITH INSTRUCTIONS "FOR SERVICE
BELOW 250 DEG. F ONLY AND FOR OIL APPLICATIONS". EPR O-RING SHALL BE
INSTALLED IN THE VALVE.UNION TAILPIECE ASSEMBLIES ARE NOT TO BE
FURNISHED.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.

Contractor shall enclose a signed hydrostatic test report with each
valve supplied under contract. This information can be placed in each
box or affixed to each box as a label. Information contained on the
label/report shall
certify that Hydrostatic testing has been performed and successfully met
the requirements of the drawing or specification sited in the contract.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 80064 4384536
REVISION NR N   DTD 09/27/2016
PART PIECE NUMBER: 803-4384536-31A AF