USCGC key biscayne (WPB-1339) 10 drydock repairs

Added: May 06, 2010 3:23 pm Amendment 0006 is hereby issued to provide the new performance period  which is now scheduled to start on June 1, 2010 instead of May 17, 2010.  The performance period will still be 60 calendar days.  Offereors who provided proposlas on January 21, 2010 are asked to confirm their prices or advise to the contrary, by Tuesday, May 11, 20201 at 10:00 AM, EST.

Added: Mar 09, 2010 1:24 pm Amendment 0005 is herby issued to provide the Thomas Register web site as a reference for ppossible other sources for the cable required to be used in Work Item Number 67.  The due date for offers remains March 11, 2010 at 2:00PM, EST. 

Added: Mar 08, 2010 8:51 am Amendment 0004 is hereby issued to provide an acceptable substitute cable to be used in lieu of the LS-SGGU-300 cable called out on Work Item #67 and to extend the offer due date from Mar 8, 2010 till March 11, 2010 at 2:00 PM, EST.

Added: Mar 02, 2010 10:23 am Amendment 0003 is hereby issued to provide the correct drawing 110C WPB 581-002, Rev B, to be used in conjunction with Work Item 64 and to also extend the offer due date from March 4, 2010 until March 8, 2010, at 2:00 PM, EST.

Added: Mar 01, 2010 1:06 pm Amendment 0002 is hereby issued to provide Specification REV 1, dated 01 March 2010, to correct paragraph 1.1 of Work Item #53 to provide the correct SSDG that is to be covered under this Work Item and to add HSAR Clause 3052.223-70, which was omitted in the original solicitation package.  The due date for offers remains unchanged as 4 Macrg 2010 at 2:00 PM, EST.

Added: Feb 18, 2010 12:12 pm Amendment 0001 is hereby issued to  extend the offer due date shown in block 8 on the SF1449 from 26 Feb 2010 to 4 March 2010, at 2:00 PM, EST; to change the effective date on FAR Clauses 52.212-5 and FAR 52.232-36 to the new date of FEB 2010 and to offer drawing 110C WPB 501-001, Rev. H, which was omitted on the orgignal CD-ROM, to all prospective offerors. 

Added: Jan 20, 2010 10:22 am The U.S. Coast Guard is setting aside this acquisition for Small Business concerns. The Coast Guard intends to conduct this procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. The NAICS Code is 336611 and the SIC is 3731. The acquisition is for drydock repairs to the USCGC KEY BISCAYNE (WPB-1339), a 110 FOOT "C" CLASS PATROL BOAT, at the contractor's facility.

The simplified acquisition will be issued as a Best Value Request for Quotes (RFQ), on or about 08 February 2010 with quotes due on or about 05 March 2010 via the Federal Business Opportunities (FEDBIZOPPS) web page at https://fbo.gov. This requirement will be evaluated using past performance as an evaluation factor. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. FEDBIZOPS also contains an option for automatic notification service. Hard copies of the specification and solicitation will not be issued.

A CD-ROM containing all applicable drawings is available free of charge to contractors upon request not later than three (3) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

The home pier of the vessel is 100 Trumbo Point Annex, Key West, FL 33040. The vessel's availability is for Sixty (60) calendar days, starting on or about 17 May 2010. This requirement is geographically restricted to a facility within 576 nautical miles, one-way or 1,152 nautical miles, round-trip of the vessels homeport of Key West, Florida.

The scope of this acquisition is for the dry docking, overhauling, cleaning and repairing of various items aboard the USCGC KEY BISCAYNE (WPB-1339). Provide all labor, material and equipment necessary to perform dry dock repairs, including but not limited to the following: routine drydocking, provide temporary logistics, clean and inspect fuel service tanks, clean and inspect fuel stowage and overflow tanks, clean and insect oil and oily waste tanks, clean and insect sewage collection and holding tanks, clean and inspect grey water collection and holding tanks, perform air test of interior compartments, clean sewage piping system, clean grey water piping system, clean and disinfect potable water tanks, preserve and disinfect potable water tanks - 100%, preserve sewage collection and holding tanks - 100%, preserve grey water collection and holding tanks - 100%, preserve oil and oily water tanks - 100%, inspect mde exhaust system, remove, inspect and reinstall propellers, repair propeller root erosion, remove, inspect and reinstall propeller shafts, overhaul mechanical shaft seal assemblies, renew water-lubricated propeller shaft bearings, clean and insect heat exchangers, overhaul and renew sea valves, overhaul and renew firemain valves, overhaul and renew bilge and ballast valves, overhaul duplex sea strainers, overhaul stabilizing fins, overhaul steering gear components, remove, inspect and reinstall rudder assemblies, inspect and maintain cathodic protection system, renew CAPAC anode assembly, renew speed Doppler and overhaul Doppler valve, renew depth indicating transducer, preserve underwater body - 100%, preserve underwater body - partial, preserve stern tubes, perform ultrasonic thickness measurements, perform aluminum hull and structural repairs - ¼" plate, perform aluminum hull and structural repairs - 3/16" plate, perform aluminum hull and structural repairs - 5/16" plate, perform hull and structural plating repairs - crack (aluminum), perform hull and structural plating repairs -eroded weld (aluminum), perform hull and structural plating repairs - overlay welding (aluminum), perform steel hull and structural plating repairs (5-pound), perform steel hull and structural plating repairs (7.5-pound or 7.65 -pound), perform hull and structural plating repairs - crack (steel), perform hull and structural plating repairs - eroded welds (steel), perform hull and structural plating repairs - overlay welding (steel), remove, reinstall and realign both main diesel engines, remove, reinstall and realign both reduction gear assemblies, perform full propulsion system alignment check, perform full propulsion system alignment, remove and reinstall ship service generator, install new grey water pumps and piping, renew grey water piping, perform hull inspection - CPO sanitary space, install OWS recovered oil piping and simplex strainer, renew MDE exhaust piping, perform piping repairs to SSDG raw water piping, renew fuel piping and valves, perform structural repairs - superstructure, perform structural repairs - sewage tank, perform structural repairs - forward inaccessible void wastage and installation of a void box, perform structural repairs - transom hull plate and framing, perform structural repairs - bridge windows and drain renewal, perform structural repairs -aft grey water tank, preserve and repair surfaces in engine room, preserve and insulate aft steering compartment, preserve freeboard - 100%, preserve superstructure, preserve forward void, preserve and insulate battery compartment, preserve forward auxiliary machinery space, renew floating deck system in galley and mess deck, renew false bulkheads in galley and mess deck, renew ship service generator, composite labor rate, GFP report and lay days.

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualifications procedures. For further information or questions regarding this solicitation or a copy of the CD -ROM, please contact Mr. Louis Romano at (757) 628-4651, or by e-mail to Louis.J.Romano@uscg.mil.