USCGC katmai BAY

Added: Feb 03, 2015 1:23 pm The United States Coast Guard Surfaces Force Logistic Center, intends to issue a Commercial Request for Quote (RFQ) for DRYDOCK Repairs to the USCGC KATMAI BAY. The acquisition will be solicited as a Total Small Business Set-Aside. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation FAR Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Best Value, Request for Quote (RFQ), on or about February 18, 2015. The solicitation will be issued electronically on the FEDBIZOPPS web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. Please sign up for the Auto Notification service to receive e-mail from FEDBIZOPPS when an action is taken under this solicitation. If you have questions regarding FEDBIZOPPS, contact Sandra Martinez at (757) 628-4591 or email sandra.a.martinez@uscg.mil. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail sandra.a.martinez@uscg.mil.
Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC KATMAI BAY. The USCGC KATMAI BAY is home ported in Sault Ste. Marie, MI. Geographic Restriction: Restricted to the Great Lake Area.

SCOPE OF WORK: The scope of the acquisition is for the DRYDOCK repairs of the USCGC KATMAI BAY. This work will include, but is not limited to the following work items:

Hull Plating (U/W Body), Inspect
Hull Plating (U/W Body), Ultrasonic Testing
Bubbler Channels, Inspect
Appendages (U/W), Leak Test
Appendages (U/W) - Internal, Preserve
Voids (Non-Accessible), Leak Test
Voids (Non-Accessible), Internal Surfaces, Preserve
Propulsion Shafting, Remove, Inspect, and Reinstall
Propulsion Shaft Seals, Overhaul
Propulsion Shaft Bearings (External), Check Clearances
Propeller, Remove, Inspect, and Reinstall
Fathometer Transducer, Renew
Vent Ducts (Engine and Motor Room All), Commercial Cleaning
Vent Ducts (Galley and Pantry Room All), Commercial Cleaning
Vent Ducts (All Other), Commercial Cleaning
Sea Valves and Waster Pieces, Overhaul or Renew
Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift
Rudder Assembly; Remove, Inspect and Reinstall
Anchor Windlass, Level 2 Inspect and Repair
Grey Water Holding Tank(s), Clean and Inspect
Tanks (Grey Water Holding), Preserve "Partial"
U/W Body, Preserve (100%)
U/W Body, Preserve (Partial - Condition A)
U/W Body, Preserve (Partial - Condition B)
Hull Plating Freeboard, Preserve "100%"
Cathodic Protection / Zinc Anodes, Renew «ASSET»
Drydocking - Tender
Temporary Services, Provide - Tender
Sea Trial Performance, Support, Provide
Lead-Based Paint, Perform 100% Abatement
Lead-Based Paint, Perform Partial Abatement
Fixed Ballast (Lead Ingots), Encapsulate
Vent Ducts (Laundry Exhaust), Commercial Cleaning
Fuel Valves, Overhaul or Renew
Fuel Manifold, Overhaul
Rudder Stock Bearings (Upper and Lower), Renew
Superstructure, Preserve "100%"
Watertight Doors and Scuttles (External), Renew
Deck Gear, Shrink Wrap
Auxiliary Sea Water System Valves, Overhaul Or Renew
Fuel Manifold, Overhaul
Boat Davit Winch, Shrink Wrap
Lead Dust, Clean
{Type System Name} Pump(s), Overhaul
Machinery Exhaust Stack Insulation, Renew
Steering Hydraulic Cylinders (Rams), Overhaul
(AFC-45)
Relocate and Renew Bos'n Hole Ladder
Renew Galley Supply Fan
Install Vent in Deck Locker
Install Steering System Gauges
Renew Aft Engineroom Padeye
Load Test Interior Padeyes (All)
Main Propulsion Motors - Commercial Clean
Main Propulsion Generators - Commercial Clean
Renew (4) Deckhouse Screen Doors
Composite Labor Rate
GFP Report
Laydays
Anticipated Period of Performance: The period of performance is anticipated to be for FIFTY (50) calendar days with a start date of 08 JULY 2015 through 26 AUGUST 2015 (Subject to change at the discretion of the Government).
NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees.
All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. This solicitation is Subject to Availability of Funds. All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact the Contracting Official listed above