Union assembly, tail

CONTACT INFORMATION|4|N743.4|WVQ|717-605-3354|amanda.l.bailey50.civ@us.navy.mil|

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19||||||||||||||||||||

HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|See specification sections C and E. |

INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2|||

GENERAL INFORMATION-FOB-DESTINATION|1|A|

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Stand-Alone Receiving Report- Certifications Combo- Receiving Report & Invoice- Material |N/A|TBD|N00104 |TBD|N39040 |N50286 |TBD|133.2|N/A|N/A|N39040 |N/A|N/A|SEE DD F

ORM 1423 |PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL |

NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1||

EQUAL OPPORTUNITY (SEP 2016)|2|||

WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|365 days after acceptances of material|365 days after acceptances of material|||||

WARRANTY OF DATA--BASIC (MAR 2014)|2|||

BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11||||||||||||

NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1||

ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2023)|13||||||||||||||

BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5||||||

BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1||

ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2024)|13|332919|750||||||||||||

NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||x|

DD1423 Data Item A001 may be waived if already on file at NAVSUP WSS Mechanicsburg.

Any contract awarded as a result of this solicitation will be "DO" rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS).

NAVSUP WSS Mechanicsburg will be considering past performance in the evaluation of offers in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000.

If drawings are included in the solicitation, access needs to be requested on the individual solicitation page on Contracts Opportunities on the Government's SAM website. After requesting access, send an email to the Primary POC listed on the solicitation.

\

1. SCOPE

1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital

shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material.

2. APPLICABLE DOCUMENTS

2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order,

however, must supersede applicable laws and regulations unless a specific exemption has been obtained.

2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.2.1 Specification Revisions - The specification revisions listed under "Documents References" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric

Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification

revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009,

R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract.

2.2.2 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made.

2.2.3 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

DRAWING DATA=2621-791-01 |96169|AA| |D|0001 |AA|49998|0070663

DRAWING DATA=2621-791-01 |96169|AA| |D|0002 | Z|49998|0093354

DRAWING DATA=2621-791-01 |96169|AA| |D|0002.1 | Z|49998|0121734

DRAWING DATA=2621-791-01 |96169|AA| |D|0002.2 | Z|49998|0164597

DRAWING DATA=2621-791-01 |96169|AA| |D|0002.3 | Z|49998|0104361

DRAWING DATA=2621-791-01 |96169|AA| |D|0002.4 | Z|49998|0090283

DRAWING DATA=2621-791-01 |96169|AA| |D|0002.5 |AA|49998|0067220

DRAWING DATA=2621-791-01 |96169|AA| |D|0003 |AA|49998|0053486

DRAWING DATA=2621-791-01 |96169|AA| |D|0003.1 |AA|49998|0090282

DRAWING DATA=2621-791-01 |96169|AA| |D|0003.2 | Z|49998|0115469

DRAWING DATA=2621-791-01 |96169|AA| |D|0003.3 |AA|49998|0101880

DRAWING DATA=2621-791-01 |96169|AA| |D|0003.4 | Z|49998|0164200

DRAWING DATA=2621-791-01 |96169|AA| |D|0004 | Z|49998|0086226

DRAWING DATA=2621-791-01 |96169|AA| |D|0005 | Z|49998|0059824

DRAWING DATA=2621-791-01 |96169|AA| |D|0005.1 | Z|49998|0066467

DRAWING DATA=2621-791-01 |96169|AA| |D|0006 | Z|49998|0052547

DRAWING DATA=2621-791-01 |96169|AA| |D|0007 | Z|49998|0052306

DRAWING DATA=2621-791-01 |96169|AA| |D|0008 | Z|49998|0064509

DRAWING DATA=2621-791-01 |96169|AA| |D|0009 | Z|49998|0050553

DRAWING DATA=2621-791-01 |96169|AA| |D|0010 | Z|49998|0052491

DRAWING DATA=2621-791-01 |96169|AA| |D|0011 | Z|49998|0046627

DRAWING DATA=2621-791-01 |96169|AA| |D|0012 | Z|49998|0057276

DRAWING DATA=2621-791-01 |96169|AA| |D|0013 | Z|49998|0054667

DRAWING DATA=2621-791-01 |96169|AA| |D|0014 | Z|49998|0064639

DRAWING DATA=2621-791-01 |96169|AA| |D|0015 | Z|49998|0050945

DRAWING DATA=2621-791-01 |96169|AA| |D|0016 | Z|49998|0052676

DRAWING DATA=2621-791-01 |96169|AA| |D|0017 | Z|49998|0055937

DRAWING DATA=2621-791-01 |96169|AA| |D|0018 | Z|49998|0049969

DRAWING DATA=2621-791-01 |96169|AA| |D|0019 | Z|49998|0044629

DRAWING DATA=2621-791-01 |96169|AA| |D|0020 | Z|49998|0054427

DRAWING DATA=2621-791-01 |96169|AA| |D|0021 | Z|49998|0058053

DRAWING DATA=2621-791-01 |96169|AA| |D|0022 | Z|49998|0069808

DRAWING DATA=2621-791-01 |96169|AA| |D|0023 | Z|49998|0055207

DRAWING DATA=2621-791-01 |96169|AA| |D|0024 | Z|49998|0071203

DRAWING DATA=2621-791-01 |96169|AA| |D|0025 | Z|49998|0048802

DRAWING DATA=2621-791-01 |96169|AA| |D|0026 |AA|49998|0056519

DRAWING DATA=2621-791-01 |96169|AA| |D|0027 | Z|49998|0061895

DRAWING DATA=2621-791-01 |96169|AA| |D|0028 | Z|49998|0056524

DRAWING DATA=2621-791-01 |96169|AA| |D|0029 | Z|49998|0080829

DRAWING DATA=2621-791-01 |96169|AA| |D|0030 | Z|49998|0063549

DRAWING DATA=2621-791-01 |96169|AA| |D|0031 | Z|49998|0053061

DRAWING DATA=2621-791-01 |96169|AA| |D|0032 | Z|49998|0197841

DRAWING DATA=2621-791-01 |96169|AA| |D|0033 | Z|49998|0069559

DRAWING DATA=2621-791-01 |96169|AA| |D|0034 | Z|49998|0084006

DRAWING DATA=2621-791-01 |96169|AA| |D|0036 | Z|49998|0074998

DRAWING DATA=2621-791-01 |96169|AA| |D|0037 | Z|49998|0048185

DRAWING DATA=2621-791-01 |96169|AA| |D|0038 | Z|49998|0103294

DRAWING DATA=2621-791-01 |96169|AA| |D|0039 | Z|49998|0064841

DRAWING DATA=2621-791-01 |96169|AA| |D|0040 | Z|49998|0069106

DRAWING DATA=2621-791-01 |96169|AA| |D|0042 | Z|49998|0059514

DRAWING DATA=2621-791-01 |96169|AA| |D|0043 | Z|49998|0062066

DRAWING DATA=2621-791-01 |96169|AA| |D|0044 | Z|49998|0052595

DRAWING DATA=2621-791-01 |96169|AA| |D|0045 | Z|49998|0094080

DRAWING DATA=2621-791-01 |96169|AA| |D|0046 | Z|49998|0061060

DRAWING DATA=2621-791-01 |96169|AA| |D|0047 | Z|49998|0050774

DRAWING DATA=2621-791-01 |96169|AA| |D|0048 | Z|49998|0053692

DRAWING DATA=2621-791-01 |96169|AA| |D|0049 | Z|49998|0054295

DRAWING DATA=2621-791-01 |96169|AA| |D|0050 | Z|49998|0058088

DRAWING DATA=2621-791-01 |96169|AA| |D|0051 | Z|49998|0055648

DRAWING DATA=2621-791-01 |96169|AA| |D|0052 | Z|49998|0054047

DRAWING DATA=2621-791-01 |96169|AA| |D|0053 | Z|49998|0055390

DRAWING DATA=2621-791-01 |96169|AA| |D|0054 | Z|49998|0057634

DRAWING DATA=2621-791-01 |96169|AA| |D|0055 | Z|49998|0056363

DRAWING DATA=2621-791-01 |96169|AA| |D|0056 | Z|49998|0063501

DRAWING DATA=2621-791-01 |96169|AA| |D|0057 | Z|49998|0046034

DRAWING DATA=2621-791-01 |96169|AA| |D|0058 | Z|49998|0065654

DRAWING DATA=2621-791-01 |96169|AA| |D|0059 | Z|49998|0055675

DRAWING DATA=2621-791-01 |96169|AA| |D|0060 | Z|49998|0199599

DRAWING DATA=2621-791-01 |96169|AA| |D|0061 | Z|49998|0057992

DRAWING DATA=2621-791-01 |96169|AA| |D|0062 | Z|49998|0055608

DRAWING DATA=2621-791-01 |96169|AA| |D|0063 | Z|49998|0055675

DRAWING DATA=2621-791-01 |96169|AA| |D|0064 | Z|49998|0056999

DRAWING DATA=2621-791-01 |96169|AA| |D|0065 | Z|49998|0055555

DRAWING DATA=2621-791-01 |96169|AA| |D|0066 | Z|49998|0054117

DRAWING DATA=2621-791-01 |96169|AA| |D|0067 | Z|49998|0055593

DRAWING DATA=2621-791-01 |96169|AA| |D|0068 | Z|49998|0053492

DRAWING DATA=2621-791-01 |96169|AA| |D|0069 | Z|49998|0062483

DRAWING DATA=2621-791-01 |96169|AA| |D|0071 | Z|49998|0059039

DRAWING DATA=2621-791-01 |96169|AA| |D|0072 | Z|49998|0057042

DRAWING DATA=2621-791-01 |96169|AA| |D|0073 | Z|49998|0055653

DRAWING DATA=2621-791-01 |96169|AA| |D|0074 | Z|49998|0061472

DRAWING DATA=2621-791-01 |96169|AA| |D|0075 | Z|49998|0055622

DRAWING DATA=2621-791-01 |96169|AA| |D|0076 | Z|49998|0056689

DRAWING DATA=2621-791-01 |96169|AA| |D|0077 | Z|49998|0051541

DRAWING DATA=2621-791-01 |96169|AA| |D|0078 | Z|49998|0039921

DRAWING DATA=2621-791-01 |96169|AA| |D|0079 | Z|49998|0043778

DRAWING DATA=2621-791-01 |96169|AA| |D|0080 | Z|49998|0057374

DRAWING DATA=2621-791-01 |96169|AA| |D|0081 | Z|49998|0051848

DRAWING DATA=2621-791-01 |96169|AA| |D|0082 | Z|49998|0050606

DRAWING DATA=2621-791-01 |96169|AA| |D|0083 | Z|49998|0042659

DRAWING DATA=2621-791-01 |96169|AA| |D|0084 | Z|49998|0049678

DRAWING DATA=2621-791-01 |96169|AA| |D|0085 | Z|49998|0060403

DRAWING DATA=2621-791-01 |96169|AA| |D|0086 | Z|49998|0061140

DRAWING DATA=2621-791-01 |96169|AA| |D|0087 | Z|49998|0051633

DRAWING DATA=2621-791-01 |96169|AA| |D|0088 | Z|49998|0047765

DRAWING DATA=2621-791-01 |96169|AA| |D|0089 | Z|49998|0056335

DRAWING DATA=2621-791-01 |96169|AA| |D|0090 | Z|49998|0059338

DRAWING DATA=2621-791-01 |96169|AA| |D|0091 | Z|49998|0041021

DRAWING DATA=2621-791-01 |96169|AA| |D|0092 | Z|49998|0046426

DRAWING DATA=2621-791-01 |96169|AA| |D|0093 | Z|49998|0079254

DRAWING DATA=2621-791-01 |96169|AA| |D|0094 | Z|49998|0054078

DRAWING DATA=2621-791-01 |96169|AA| |D|0095 | Z|49998|0058651

DRAWING DATA=2621-791-01 |96169|AA| |D|0096 | Z|49998|0046071

DRAWING DATA=2621-791-01 |96169|AA| |D|0097 | Z|49998|0060669

DRAWING DATA=2621-791-01 |96169|AA| |D|0098 | Z|49998|0060478

DRAWING DATA=2621-791-01 |96169|AA| |D|0099 | Z|49998|0046914

DRAWING DATA=2621-791-01 |96169|AA| |D|0100 | Z|49998|0050767

DRAWING DATA=2621-791-01 |96169|AA| |D|0101 | Z|49998|0146431

DRAWING DATA=2621-791-01 |96169|AA| |D|0110 | Z|49998|0066387

DRAWING DATA=2621-791-01 |96169|AA| |D|0111 | Z|49998|0052411

DRAWING DATA=2621-791-01 |96169|AA| |D|0112 | Z|49998|0110641

DRAWING DATA=2621-791-01 |96169|AA| |D|0113 | Z|49998|0148645

DRAWING DATA=2621-791-01 |96169|AA| |D|0114 | Z|49998|0109587

DRAWING DATA=2621-791-01 |96169|AA| |D|0116 | Z|49998|0057239

DRAWING DATA=2621-791-01 |96169|AA| |D|0118 | Z|49998|0151428

DRAWING DATA=2621-791-01 |96169|AA| |D|0119 | Z|49998|0060898

DRAWING DATA=2621-791-01 |96169|AA| |D|0120 | Z|49998|0135158

DRAWING DATA=2621-791-01 |96169|AA| |D|0121 | Z|49998|0058071

DRAWING DATA=2621-791-01 |96169|AA| |D|0122 | Z|49998|0099709

DRAWING DATA=2621-791-01 |96169|AA| |D|0123 | Z|49998|0111573

DRAWING DATA=2621-791-01 |96169|AA| |D|0124 | Z|49998|0136031

DRAWING DATA=2621-791-01 |96169|AA| |D|0125 | Z|49998|0129238

DRAWING DATA=2621-791-01 |96169|AA| |D|0126 | Z|49998|0179849

DRAWING DATA=2621-791-01 |96169|AA| |D|0127 | Z|49998|0052750

DRAWING DATA=2621-791-01 |96169|AA| |D|0128 | Z|49998|0132401

DRAWING DATA=2621-791-01 |96169|AA| |D|0129 | Z|49998|0182844

DRAWING DATA=2621-791-01 |96169|AA| |D|0130 | Z|49998|0096747

DRAWING DATA=2621-791-01 |96169|AA| |D|0131 | Z|49998|0119429

DRAWING DATA=2621-791-01 |96169|AA| |D|0132 | Z|49998|0111995

DRAWING DATA=2621-791-01 |96169|AA| |D|0133 | Z|49998|0124130

DRAWING DATA=2621-791-01 |96169|AA| |D|0134 | Z|49998|0145370

DRAWING DATA=2621-791-01 |96169|AA| |D|0135 | Z|49998|0146381

DRAWING DATA=2621-791-01 |96169|AA| |D|0136 | Z|49998|0095522

DRAWING DATA=2621-791-01 |96169|AA| |D|0137 | Z|49998|0170590

DRAWING DATA=2621-791-01 |96169|AA| |D|0138 | Z|49998|0196206

DRAWING DATA=2621-791-01 |96169|AA| |D|0139 | Z|49998|0061775

DRAWING DATA=2621-791-01 |96169|AA| |D|0140 | Z|49998|0080900

DRAWING DATA=2621-791-01 |96169|AA| |D|0141 | Z|49998|0102737

DRAWING DATA=2621-791-01 |96169|AA| |D|0142 | Z|49998|0072598

DRAWING DATA=2621-791-01 |96169|AA| |D|0144 | Z|49998|0096961

DRAWING DATA=2621-791-01 |96169|AA| |D|0145 | Z|49998|0133987

DRAWING DATA=2621-791-01 |96169|AA| |D|0147 | Z|49998|0070747

DRAWING DATA=2621-791-01 |96169|AA| |D|0148 | Z|49998|0075919

DRAWING DATA=2621-791-01 |96169|AA| |D|0150 | Z|49998|0138035

DRAWING DATA=2621-791-01 |96169|AA| |D|0151 | Z|49998|0134080

DRAWING DATA=2621-791-01 |96169|AA| |D|0152 | Z|49998|0072391

DRAWING DATA=2621-791-01 |96169|AA| |D|0153 | Z|49998|0109432

DRAWING DATA=2621-791-01 |96169|AA| |D|0154 | Z|49998|0103968

DRAWING DATA=2621-791-01 |96169|AA| |D|0155 | Z|49998|0076365

DRAWING DATA=2621-791-01 |96169|AA| |D|0156 | Z|49998|0091390

DRAWING DATA=2621-791-01 |96169|AA| |D|0157 | Z|49998|0122296

DRAWING DATA=2621-791-01 |96169|AA| |D|0158 | Z|49998|0088420

DRAWING DATA=2621-791-01 |96169|AA| |D|0159 | Z|49998|0113179

DRAWING DATA=2621-791-01 |96169|AA| |D|0160 | Z|49998|0107681

DRAWING DATA=2621-791-01 |96169|AA| |D|0161 | Z|49998|0141625

DRAWING DATA=2621-791-01 |96169|AA| |D|0162 | Z|49998|0113494

DRAWING DATA=2621-791-01 |96169|AA| |D|0163 | Z|49998|0134946

DRAWING DATA=2621-791-01 |96169|AA| |D|0164 | Z|49998|0119893

DRAWING DATA=2621-791-01 |96169|AA| |D|0165 | Z|49998|0082710

DRAWING DATA=2621-791-01 |96169|AA| |D|0166 | Z|49998|0090756

DRAWING DATA=2621-791-01 |96169|AA| |D|0167 | Z|49998|0122896

DRAWING DATA=2621-791-01 |96169|AA| |D|0168 | Z|49998|0078411

DRAWING DATA=2621-791-01 |96169|AA| |D|0169 | Z|49998|0131560

DRAWING DATA=2621-791-01 |96169|AA| |D|0170 | Z|49998|0102741

DRAWING DATA=2621-791-01 |96169|AA| |D|0171 | Z|49998|0131949

DRAWING DATA=2621-791-01 |96169|AA| |D|0172 | Z|49998|0125405

DRAWING DATA=2621-791-01 |96169|AA| |D|0173 | Z|49998|0101424

DRAWING DATA=2621-791-01 |96169|AA| |D|0174 | Z|49998|0088610

DRAWING DATA=2621-791-01 |96169|AA| |D|0175 | Z|49998|0137691

DRAWING DATA=2621-791-01 |96169|AA| |D|0176 | Z|49998|0104280

DRAWING DATA=2621-791-01 |96169|AA| |D|0177 | Z|49998|0074104

DRAWING DATA=2621-791-01 |96169|AA| |D|0178 | Z|49998|0111100

DRAWING DATA=2621-791-01 |96169|AA| |D|0179 | Z|49998|0112411

DRAWING DATA=2621-791-01 |96169|AA| |D|0181 | Z|49998|0095033

DRAWING DATA=2621-791-01 |96169|AA| |D|0182 | Z|49998|0115688

DRAWING DATA=2621-791-01 |96169|AA| |D|0183 | Z|49998|0052186

DRAWING DATA=2621-791-01 |96169|AA| |D|0184 | Z|49998|0122191

DRAWING DATA=2621-791-01 |96169|AA| |D|0185 |AA|49998|0038626

DRAWING DATA=2621-791-01 |96169|AA| |D|0186 | Z|49998|0077245

DRAWING DATA=2621-791-01 |96169|AA| |D|0187 | Z|49998|0103364

DRAWING DATA=2621-791-01 |96169|AA| |D|0189 | Z|49998|0089245

DRAWING DATA=2621-791-01 |96169|AA| |D|0190 | Z|49998|0096426

DRAWING DATA=2621-791-01 |96169|AA| |D|0191 | Z|49998|0085423

DRAWING DATA=2621-791-01 |96169|AA| |D|0192 | Z|49998|0094922

DRAWING DATA=2621-791-01 |96169|AA| |D|0193 | Z|49998|0062588

DRAWING DATA=2621-791-01 |96169|AA| |D|0194 | Z|49998|0083872

DRAWING DATA=2621-791-01 |96169|AA| |D|0195 | Z|49998|0082002

DRAWING DATA=2621-791-01 |96169|AA| |D|0196 | Z|49998|0090187

DRAWING DATA=2621-791-01 |96169|AA| |D|0197 | Z|49998|0081986

DRAWING DATA=2621-791-01 |96169|AA| |D|0198 | Z|49998|0091058

DRAWING DATA=2621-791-01 |96169|AA| |D|0199 | Z|49998|0096379

DRAWING DATA=2621-791-01 |96169|AA| |D|0201 | Z|49998|0080167

DRAWING DATA=2621-791-01 |96169|AA| |D|0202 | Z|49998|0098925

DRAWING DATA=2621-791-01 |96169|AA| |D|0203 | Z|49998|0155243

DRAWING DATA=2621-791-01 |96169|AA| |D|0204 | Z|49998|0077541

DRAWING DATA=2621-791-01 |96169|AA| |D|0205 | Z|49998|0101342

DRAWING DATA=2621-791-01 |96169|AA| |D|0206 | Z|49998|0064710

DRAWING DATA=2621-791-01 |96169|AA| |D|0208 | Z|49998|0128717

DRAWING DATA=2621-791-01 |96169|AA| |D|0209 | Z|49998|0090751

DRAWING DATA=2621-791-01 |96169|AA| |D|0211 | Z|49998|0100234

DRAWING DATA=2621-791-01 |96169|AA| |D|0213 | Z|49998|0180351

DRAWING DATA=2621-791-01 |96169|AA| |D|0215 | Z|49998|0154904

DRAWING DATA=2621-791-01 |96169|AA| |D|0218 | Z|49998|0135476

DRAWING DATA=2621-791-01 |96169|AA| |D|0219 | Z|49998|0157898

DRAWING DATA=2621-791-01 |96169|AA| |D|0220 | Z|49998|0141165

DRAWING DATA=2621-791-03 |96169|AH| |D|0001 |AH|49998|1099781

DRAWING DATA=2621-791-03 |96169|AH| |D|0002 | E|49998|0093834

DRAWING DATA=2621-791-03 |96169|AH| |D|0002.1 | N|49998|0093912

DRAWING DATA=2621-791-03 |96169|AH| |D|0002.2 | S|49998|0084004

DRAWING DATA=2621-791-03 |96169|AH| |D|0002.3 | Z|49998|0080472

DRAWING DATA=2621-791-03 |96169|AH| |D|0002.4 |AG|49998|0081374

DRAWING DATA=2621-791-03 |96169|AH| |D|0003 |AH|49998|1479755

DRAWING DATA=2621-791-03 |96169|AH| |D|0003.1 |AG|49998|0104746

DRAWING DATA=2621-791-03 |96169|AH| |D|0003.2 | Z|49998|0109521

DRAWING DATA=2621-791-03 |96169|AH| |D|0003.3 |AF|49998|0084765

DRAWING DATA=2621-791-03 |96169|AH| |D|0004 |AE|49998|0048002

DRAWING DATA=2621-791-03 |96169|AH| |D|0005 | W|49998|0053869

DRAWING DATA=2621-791-03 |96169|AH| |D|0006 | S|49998|0043865

DRAWING DATA=2621-791-03 |96169|AH| |D|0007 | S|49998|0042921

DRAWING DATA=2621-791-03 |96169|AH| |D|0008 | S|49998|0045144

DRAWING DATA=2621-791-03 |96169|AH| |D|0009 | S|49998|0044144

DRAWING DATA=2621-791-03 |96169|AH| |D|0010 | S|49998|0045133

DRAWING DATA=2621-791-03 |96169|AH| |D|0011 | S|49998|0048325

DRAWING DATA=2621-791-03 |96169|AH| |D|0012 | S|49998|0045562

DRAWING DATA=2621-791-03 |96169|AH| |D|0013 | S|49998|0044020

DRAWING DATA=2621-791-03 |96169|AH| |D|0014 | S|49998|0051662

DRAWING DATA=2621-791-03 |96169|AH| |D|0015 | S|49998|0051587

DRAWING DATA=2621-791-03 |96169|AH| |D|0016 | S|49998|0056521

DRAWING DATA=2621-791-03 |96169|AH| |D|0017 | S|49998|0043109

DRAWING DATA=2621-791-03 |96169|AH| |D|0018 | S|49998|0051175

DRAWING DATA=2621-791-03 |96169|AH| |D|0019 | S|49998|0051676

DRAWING DATA=2621-791-03 |96169|AH| |D|0020 | S|49998|0043223

DRAWING DATA=2621-791-03 |96169|AH| |D|0021 | S|49998|0048318

DRAWING DATA=2621-791-03 |96169|AH| |D|0022 | S|49998|0044256

DRAWING DATA=2621-791-03 |96169|AH| |D|0023 | S|49998|0045309

DRAWING DATA=2621-791-03 |96169|AH| |D|0024 | S|49998|0038851

DRAWING DATA=2621-791-03 |96169|AH| |D|0026 | T|49998|0049522

DRAWING DATA=2621-791-03 |96169|AH| |D|0027 | T|49998|0050263

DRAWING DATA=2621-791-03 |96169|AH| |D|0028 | S|49998|0045460

DRAWING DATA=2621-791-03 |96169|AH| |D|0029 | W|49998|0049904

DRAWING DATA=2621-791-03 |96169|AH| |D|0030 | S|49998|0044946

DRAWING DATA=2621-791-03 |96169|AH| |D|0032 | S|49998|0045559

DRAWING DATA=2621-791-03 |96169|AH| |D|0033 | S|49998|0058776

DRAWING DATA=2621-791-03 |96169|AH| |D|0034 | S|49998|0056649

DRAWING DATA=2621-791-03 |96169|AH| |D|0035 | S|49998|0042192

DRAWING DATA=2621-791-03 |96169|AH| |D|0036 | S|49998|0044609

DRAWING DATA=2621-791-03 |96169|AH| |D|0037 | S|49998|0046376

DRAWING DATA=2621-791-03 |96169|AH| |D|0038 | S|49998|0045188

DRAWING DATA=2621-791-03 |96169|AH| |D|0039 | S|49998|0029292

DRAWING DATA=2621-791-03 |96169|AH| |D|0040 | S|49998|0041520

DRAWING DATA=2621-791-03 |96169|AH| |D|0042 | S|49998|0048609

DRAWING DATA=2621-791-03 |96169|AH| |D|0044 | S|49998|0045163

DRAWING DATA=2621-791-03 |96169|AH| |D|0045 | S|49998|0054516

DRAWING DATA=2621-791-03 |96169|AH| |D|0046 | S|49998|0056330

DRAWING DATA=2621-791-03 |96169|AH| |D|0048 | S|49998|0044509

DRAWING DATA=2621-791-03 |96169|AH| |D|0049 | S|49998|0041932

DRAWING DATA=2621-791-03 |96169|AH| |D|0050 | S|49998|0044865

DRAWING DATA=2621-791-03 |96169|AH| |D|0051 | S|49998|0038987

DRAWING DATA=2621-791-03 |96169|AH| |D|0052 | G|49998|0025801

DRAWING DATA=2621-791-03 |96169|AH| |D|0053 | S|49998|0049639

DRAWING DATA=2621-791-03 |96169|AH| |D|0054 | S|49998|0055106

DRAWING DATA=2621-791-03 |96169|AH| |D|0055 | S|49998|0044796

DRAWING DATA=2621-791-03 |96169|AH| |D|0056 | S|49998|0059058

DRAWING DATA=2621-791-03 |96169|AH| |D|0057 | S|49998|0046995

DRAWING DATA=2621-791-03 |96169|AH| |D|0058 | R|49998|0041357

DRAWING DATA=2621-791-03 |96169|AH| |D|0059 | S|49998|0047938

DRAWING DATA=2621-791-03 |96169|AH| |D|0060 | S|49998|0050266

DRAWING DATA=2621-791-03 |96169|AH| |D|0062 | S|49998|0046083

DRAWING DATA=2621-791-03 |96169|AH| |D|0063 | S|49998|0048321

DRAWING DATA=2621-791-03 |96169|AH| |D|0064 | S|49998|0045544

DRAWING DATA=2621-791-03 |96169|AH| |D|0065 | S|49998|0045927

DRAWING DATA=2621-791-03 |96169|AH| |D|0066 | S|49998|0049004

DRAWING DATA=2621-791-03 |96169|AH| |D|0067 | S|49998|0048496

DRAWING DATA=2621-791-03 |96169|AH| |D|0068 | S|49998|0049978

DRAWING DATA=2621-791-03 |96169|AH| |D|0069 | S|49998|0048131

DRAWING DATA=2621-791-03 |96169|AH| |D|0070 | S|49998|0050094

DRAWING DATA=2621-791-03 |96169|AH| |D|0071 | S|49998|0050025

DRAWING DATA=2621-791-03 |96169|AH| |D|0073 | S|49998|0044171

DRAWING DATA=2621-791-03 |96169|AH| |D|0074 | S|49998|0051599

DRAWING DATA=2621-791-03 |96169|AH| |D|0075 | S|49998|0060576

DRAWING DATA=2621-791-03 |96169|AH| |D|0076 | S|49998|0046571

DRAWING DATA=2621-791-03 |96169|AH| |D|0077 | S|49998|0043681

DRAWING DATA=2621-791-03 |96169|AH| |D|0078 | S|49998|0048401

DRAWING DATA=2621-791-03 |96169|AH| |D|0080 | S|49998|0047074

DRAWING DATA=2621-791-03 |96169|AH| |D|0081 | S|49998|0052498

DRAWING DATA=2621-791-03 |96169|AH| |D|0082 | S|49998|0046343

DRAWING DATA=2621-791-03 |96169|AH| |D|0084 | S|49998|0049085

DRAWING DATA=2621-791-03 |96169|AH| |D|0085 | S|49998|0050355

DRAWING DATA=2621-791-03 |96169|AH| |D|0086 | S|49998|0047637

DRAWING DATA=2621-791-03 |96169|AH| |D|0088 | S|49998|0052543

DRAWING DATA=2621-791-03 |96169|AH| |D|0089 | S|49998|0053341

DRAWING DATA=2621-791-03 |96169|AH| |D|0090 | S|49998|0051610

DRAWING DATA=2621-791-03 |96169|AH| |D|0091 | S|49998|0044976

DRAWING DATA=2621-791-03 |96169|AH| |D|0092 | S|49998|0053454

DRAWING DATA=2621-791-03 |96169|AH| |D|0093 | S|49998|0044994

DRAWING DATA=2621-791-03 |96169|AH| |D|0094 |AG|49998|0055947

DRAWING DATA=2621-791-03 |96169|AH| |D|0097 | S|49998|0059165

DRAWING DATA=2621-791-03 |96169|AH| |D|0098 | S|49998|0048556

DRAWING DATA=2621-791-03 |96169|AH| |D|0100 | S|49998|0048969

DRAWING DATA=2621-791-03 |96169|AH| |D|0101 | S|49998|0053433

DRAWING DATA=2621-791-03 |96169|AH| |D|0104 | S|49998|0048487

DRAWING DATA=2621-791-03 |96169|AH| |D|0105 | S|49998|0053603

DRAWING DATA=2621-791-03 |96169|AH| |D|0106 | S|49998|0045047

DRAWING DATA=2621-791-03 |96169|AH| |D|0107 | S|49998|0052116

DRAWING DATA=2621-791-03 |96169|AH| |D|0108 | S|49998|0051683

DRAWING DATA=2621-791-03 |96169|AH| |D|0109 | S|49998|0046812

DRAWING DATA=2621-791-03 |96169|AH| |D|0110 | S|49998|0044134

DRAWING DATA=2621-791-03 |96169|AH| |D|0111 | S|49998|0044450

DRAWING DATA=2621-791-03 |96169|AH| |D|0112 | S|49998|0048911

DRAWING DATA=2621-791-03 |96169|AH| |D|0113 | S|49998|0043568

DRAWING DATA=2621-791-03 |96169|AH| |D|0114 | S|49998|0042710

DRAWING DATA=2621-791-03 |96169|AH| |D|0115 | S|49998|0053183

DRAWING DATA=2621-791-03 |96169|AH| |D|0117 | S|49998|0055402

DRAWING DATA=2621-791-03 |96169|AH| |D|0118 | S|49998|0053652

DRAWING DATA=2621-791-03 |96169|AH| |D|0119 | S|49998|0049652

DRAWING DATA=2621-791-03 |96169|AH| |D|0120 | S|49998|0047473

DRAWING DATA=2621-791-03 |96169|AH| |D|0121 | S|49998|0047938

DRAWING DATA=2621-791-03 |96169|AH| |D|0122 | S|49998|0047063

DRAWING DATA=2621-791-03 |96169|AH| |D|0123 | S|49998|0048814

DRAWING DATA=2621-791-03 |96169|AH| |D|0125 | S|49998|0050225

DRAWING DATA=2621-791-03 |96169|AH| |D|0126 | S|49998|0044104

DRAWING DATA=2621-791-03 |96169|AH| |D|0128 | S|49998|0048780

DRAWING DATA=2621-791-03 |96169|AH| |D|0129 | S|49998|0047642

DRAWING DATA=2621-791-03 |96169|AH| |D|0130 | S|49998|0051682

DRAWING DATA=2621-791-03 |96169|AH| |D|0131 |AB|49998|0047423

DRAWING DATA=2621-791-03 |96169|AH| |D|0133 | S|49998|0050551

DRAWING DATA=2621-791-03 |96169|AH| |D|0134 | S|49998|0050248

DRAWING DATA=2621-791-03 |96169|AH| |D|0135 | S|49998|0049013

DRAWING DATA=2621-791-03 |96169|AH| |D|0136 | S|49998|0048565

DRAWING DATA=2621-791-03 |96169|AH| |D|0137 | S|49998|0058765

DRAWING DATA=2621-791-03 |96169|AH| |D|0138 | S|49998|0049081

DRAWING DATA=2621-791-03 |96169|AH| |D|0139 | S|49998|0046638

DRAWING DATA=2621-791-03 |96169|AH| |D|0142 | S|49998|0048472

DRAWING DATA=2621-791-03 |96169|AH| |D|0143 | S|49998|0037522

DRAWING DATA=2621-791-03 |96169|AH| |D|0144 | S|49998|0036410

DRAWING DATA=2621-791-03 |96169|AH| |D|0145 | S|49998|0042176

DRAWING DATA=2621-791-03 |96169|AH| |D|0146 | S|49998|0041414

DRAWING DATA=2621-791-03 |96169|AH| |D|0147 | S|49998|0039178

DRAWING DATA=2621-791-03 |96169|AH| |D|0148 | S|49998|0041892

DRAWING DATA=2621-791-03 |96169|AH| |D|0149 | S|49998|0043895

DRAWING DATA=2621-791-03 |96169|AH| |D|0150 | W|49998|0059059

DRAWING DATA=2621-791-03 |96169|AH| |D|0151 | S|49998|0046011

DRAWING DATA=2621-791-03 |96169|AH| |D|0152 | S|49998|0042735

DRAWING DATA=2621-791-03 |96169|AH| |D|0153 | S|49998|0042554

DRAWING DATA=2621-791-03 |96169|AH| |D|0154 | S|49998|0040704

DRAWING DATA=2621-791-03 |96169|AH| |D|0155 | S|49998|0046924

DRAWING DATA=2621-791-03 |96169|AH| |D|0156 | U|49998|0060449

DRAWING DATA=2621-791-03 |96169|AH| |D|0157 | S|49998|0045538

DRAWING DATA=2621-791-03 |96169|AH| |D|0158 | S|49998|0049459

DRAWING DATA=2621-791-03 |96169|AH| |D|0159 | S|49998|0051353

DRAWING DATA=2621-791-03 |96169|AH| |D|0160 | S|49998|0051528

DRAWING DATA=2621-791-03 |96169|AH| |D|0161 | S|49998|0048816

DRAWING DATA=2621-791-03 |96169|AH| |D|0162 | T|49998|0046034

DRAWING DATA=2621-791-03 |96169|AH| |D|0163 | V|49998|0045561

DRAWING DATA=2621-791-03 |96169|AH| |D|0164 | T|49998|0044982

DRAWING DATA=2621-791-03 |96169|AH| |D|0166 | W|49998|0044947

DRAWING DATA=2621-791-03 |96169|AH| |D|0167 | V|49998|0044291

DRAWING DATA=2621-791-03 |96169|AH| |D|0168 | V|49998|0046934

DRAWING DATA=2621-791-03 |96169|AH| |D|0169 | V|49998|0044076

DRAWING DATA=2621-791-03 |96169|AH| |D|0170 | W|49998|0052259

DRAWING DATA=2621-791-03 |96169|AH| |D|0171 | W|49998|0046967

DRAWING DATA=2621-791-03 |96169|AH| |D|0172 | Z|49998|0048360

DRAWING DATA=2621-791-03 |96169|AH| |D|0178 | Y|49998|0050049

DRAWING DATA=2621-791-03 |96169|AH| |D|0179 | Y|49998|0042605

DRAWING DATA=2621-791-03 |96169|AH| |D|0180 | Z|49998|0052067

DRAWING DATA=2621-791-03 |96169|AH| |D|0181 | Z|49998|0052402

DRAWING DATA=2621-791-03 |96169|AH| |D|0182 | Z|49998|0034357

DRAWING DATA=2621-791-03 |96169|AH| |D|0184 | Z|49998|0044508

DRAWING DATA=2621-791-03 |96169|AH| |D|0185 | Z|49998|0046507

DRAWING DATA=2621-791-03 |96169|AH| |D|0186 | Z|49998|0044873

DRAWING DATA=2621-791-03 |96169|AH| |D|0187 | Z|49998|0044826

DRAWING DATA=2621-791-03 |96169|AH| |D|0189 | Z|49998|0050787

DRAWING DATA=2621-791-03 |96169|AH| |D|0190 |AA|49998|0062191

DRAWING DATA=2621-791-03 |96169|AH| |D|0191 |AA|49998|0058438

DRAWING DATA=2621-791-03 |96169|AH| |D|0192 |AA|49998|0059208

DRAWING DATA=2621-791-03 |96169|AH| |D|0193 |AA|49998|0057318

DRAWING DATA=2621-791-03 |96169|AH| |D|0194 |AB|49998|0039987

DRAWING DATA=2621-791-03 |96169|AH| |D|0196 |AB|49998|0036508

DRAWING DATA=2621-791-03 |96169|AH| |D|0197 | -|49998|0068541

DRAWING DATA=2621-791-03 |96169|AH| |D|0198 |AC|49998|0044476

DRAWING DATA=2621-791-03 |96169|AH| |D|0199 |AD|49998|0048586

DRAWING DATA=2621-791-03 |96169|AH| |D|02-5 |AH|49998|0118409

DRAWING DATA=2621-791-03 |96169|AH| |D|0200 |AD|49998|0047879

DRAWING DATA=2621-791-03 |96169|AH| |D|0201 |AD|49998|0047560

DRAWING DATA=2621-791-03 |96169|AH| |D|0203 |AE|49998|0039902

DRAWING DATA=2621-791-03 |96169|AH| |D|0204 |AE|49998|0036768

DRAWING DATA=2621-791-03 |96169|AH| |D|0206 |AE|49998|0050221

DRAWING DATA=2621-791-03 |96169|AH| |D|0207 |AE|49998|0041246

DRAWING DATA=2621-791-03 |96169|AH| |D|0208 |AE|49998|0044695

DRAWING DATA=2621-791-03 |96169|AH| |D|0209 |AE|49998|0051210

DRAWING DATA=2621-791-03 |96169|AH| |D|0210 |AE|49998|0040535

DRAWING DATA=2621-791-03 |96169|AH| |D|0211 |AE|49998|0045813

DRAWING DATA=2621-791-03 |96169|AH| |D|0212 |AE|49998|0050283

DRAWING DATA=2621-791-03 |96169|AH| |D|0213 |AF|49998|0054474

DRAWING DATA=2621-791-03 |96169|AH| |D|0214 |AF|49998|0037145

DRAWING DATA=2621-791-03 |96169|AH| |D|0215 |AF|49998|0045384

DRAWING DATA=2621-791-03 |96169|AH| |D|0216 |AF|49998|0049187

DRAWING DATA=2621-791-03 |96169|AH| |D|0217 |AH|49998|0034430

DRAWING DATA=2621-791-03 |96169|AH| |D|03-2 |AH|49998|2398249

DRAWING DATA=2621-791-03 |96169|AH| |D|03-3 |AH|49998|1124005

DRAWING DATA=2621-791-04 |96169|AA| |D|0001 |AA|49998|5233934

DOCUMENT REF DATA=FED-STD-H28 | | |B |190424|A| | |

DOCUMENT REF DATA=FED-STD-H28 |0020| |B |941221|A| |01|

DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | |

DOCUMENT REF DATA=QQ-N-281 | | |D |851023|A|2 | |

DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | |

DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | |

DOCUMENT REF DATA=ISO10012 | | | |030415|A| | |

DOCUMENT REF DATA=MIL-C-15726 | | |F |911008|A|1 | |

DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | |

DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A|1 | |

DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | |

DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | |

DOCUMENT REF DATA=0900-LP-001-7000 | | | |810101|C| |01|

DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | |

DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | |

3. REQUIREMENTS

3.1 ;Tail piece must be made in accordance with Drawing 2621-791-03 Assembly 16A, unless amplified or modified herein.;

3.2 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise:

Part - ;Union Nut, Piece No. 20A of Drawing 2621-791-04;

Material - ;QQ-N-281 and meeting the requirements of Note 14 of Drawing 2621-791-04;

Part - ;Tailpiece, Piece No. 36A of Drawing 2621-791-01;

Material - ;MIL-C-15726, alloy C71500;

3.3 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings and specifications is still required, but certifications are only required as

listed below.

Test - Non-Destructive Tests

Item - ;Weld Repair and/or Production Weld (as applicable);

Performance - Per applicable fabrication specification

Acceptance - Per applicable fabrication specification

3.4 Specification Change - For QQ-N-281, Class B material:

1 - Footnote 9 to Table II of QQ-N-281 does not apply.

2 - When starting material is Round Bar greater than 3" dia,

the mechanical properties of Hex Bar apply.

3.5 Thread Inspection Requirements - All threads on threaded parts must be inspected using appropriate inspection methods, inspection systems, and inspection gages/instruments in accordance with FED-STD-H28 series. Substitution of thecommercial equivalent

inspection in accordance with ASME B1 series is acceptable.

3.5.1 System 21 of FED-STD-H28/20 must be used as a minimum inspection requirement for threads when the design drawing or design specification does not specify an inspection requirement.

3.5.2 For Navy and Shipyard drawings, system 21 of FED-STD-H28/20 may be substituted for System 22 without further Navy approval when the design drawing invokes System 22 and does not cite governing specifications that specifically require system 22. System 22

of FED-STD-H28/20 must be used when the drawing references other governing specifications that specifically require System 22, such as certain thread types of MIL-DTL-1222.

3.5.3 A written request for concurrence must be submitted when utilizing alternative measuring equipment or measuring systems not applicable to the specified inspection system.

3.6 Internal Threads - All internal threads must be formed by cutting. Cold forming of internal threads is not acceptable.

3.7 O-ring grooves and mating sealing surfaces must be inspected per the contractually invoked drawings or specifications. When the drawings or specifications do not provide specific defect criteria or state that no defects are allowed, the General Acceptance

Criteria (GAC) standard must be used for inspecting O-ring grooves and mating sealing surfaces only. Repairs to sealing surfaces and O-ring grooves with unacceptable defects may be accomplished within the limits of the size and tolerances provided in the

applicable drawing. Repairs thatwould exceed these limits require approval (including final dimensions). The data that is red lined (crossed out) is excluded from the GAC for this contract and is not to be used for acceptance or rejection criteria. The GAC

document is identified as Contract Support Library Reference Number CSD008 at https://register.nslc.navy.mil/

3.8 Welding or Brazing - When welding, brazing, and allied processes are required, as invoked by Section C paragraph 3 requirements, they must be in accordance with S9074-AR-GIB-010A/278, 0900-LP-001-7000 for brazing of piping and pressure vessel applications,

or S9074-AQ-GIB-010/248 for brazing of other applications. For all production and repair welding and brazing personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, as applicable. Procedures and Qualification Data must be

submitted for review and approval prior to performing any welding or brazing.

3.9 Certificate of Compliance - (SPECIAL EMPHASIS MATERIAL) The Contractor must prepare and submit a certificate of compliance certifying that the items/components furnished under this contract comply with the requirements of the procurement document,

including any/all invoked specifications and drawings.

3.10 Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format.

Definitions are provided elsewhere in the Contract/Purchase Order.

3.10.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide

a copy of this request to the QAR. Requests must include the information listed below.

a. A complete description of the contract requirement affected

and the nature of the waiver/deviation (non-conformance),

including a classification of Critical, Major, or Minor.

b. Number of units (and serial/lot numbers) to be delivered in this

configuration.

c. Any impacts to logistics support elements (such as software,

manuals, spares, tools, and similar) being utilized by Government

personnel or impacts to the operational use of the product.

d. Information about remedial action being taken to prevent reoccurrence

of the non-conformance.

3.10.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted to the NAVSUP WSS Contracting Specialist via eMail.

3.10.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering

Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract. ECPs must be prepared in Contractor format, and must include the following information:

a. The change priority, change classification (Class I or Class II),

and change justification.

b. A complete description of the change to be made and the need for

that change.

c. A complete listing of other Configuration Items impacted by the

proposed change and a description of the impact on those CIs.

d. Proposed changes to documents controlled by the Government.

e. Proposed serial/lot number effectivities of units to be

produced in, or retrofitted to, the proposed configuration.

f. Recommendations about the way a retrofit should be accomplished.

g. Impacts to any logistics support elements (such as software,

manuals, spares, tools, and similar) being utilized by Government

personnel in support of the product.

h. Impacts to the operational use of the product.

i. Complete estimated life-cycle cost impact of the proposed change.

j. Milestones relating to the processing and implementation of the

engineering change.

3.11 Mercury Free - Mercury and mercury containing compounds must not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Mercury contamination of the material will be cause for rejection.

3.12 NAVSEA 0948-LP-045-7010 - Any applicable requirements of NAVSHIPS 4410.17,NAVSEA 0948-LP-045-7010, or 0948-045-7010 which the contractor must meet are included in this contract/purchase order. The above documents are for GovernmentUse Only. Further

application of the above documents is prohibited.prohibited.

3.12.1 Marking of material with a Material Designator per the Drawing is also prohibited, with the exception of Fasteners. Fasteners must be marked with a Material Symbol/Designator as specified elsewhere in this contract.

^ QUALITY ASSURANCE REQUIREMENTS ^

3.13 See CDRL DI-MISC-80678 (Test Certification) - A statement of tests performed, listing the pieces tested must be furnished along with a copy of the test results. Certification must include the contractor's name, address and date, quantity inspected,

identified to the contract/purchase order and item number, and the Contractor's or authorized personnel's signature. Test certifications must reference the standard/specification, including the revision, to which the testing was performed and the acceptance

criteria used. Test procedure numbers may also be referenced on test reports. Test reports on weldments must be identified to weld joint and layer.

3.14 Quality System Requirements - The Contractor furnishing items under this contract/purchase order must provide and maintain a quality system in accordance with ISO-9001 as amplified or modified herein, with the calibration system requirements of ISO-10012

or ANSI-Z540.3 with ISO-17025. A Quality System in accordance with MIL-I-45208, with the calibration system requirements of MIL-STD-45662, is acceptable as an alternate.

3.14.1 The Contractor's quality system and products supplied under the system are subject to evaluation, verification inspection, and acceptance/nonacceptance by the Government representative to determine the system's effectiveness in meeting the quality

requirements established in the Contract/Purchase Order.

3.14.2 The Contractor's quality system must be documented and must be available for review by the Contracting Officer or his representative prior to initiation of production and throughout the life of the contract. The Prime Contractor must, upon

notification, make his facilities available for audit by the contracting Officer or his authorized representative.

3.14.3 See CDRL DI-QCIC-81110 (Inspection System Procedures) - All suppliers of Level I/SUBSAFE (LI/SS) material are required to submit a copy of their current documented quality system procedures to the Procurement Contracting Officer (PCO) prior to award of

any contract/purchase order. Suppliers that have a copy of their current quality system procedures on file at the Procuring Activity may request the PCO waive this requirement.

3.14.4 This contract provides for the performance of Government Quality Assurance at source. The place or places of performance may not be changed without the authorization of the Procurement Contracting Officer. Upon receipt of this order, promptly

notify the Government representative who normally services your plant so that appropriate planning for Government inspection can be accomplished. If you do not have an assigned Government representative, notify the nearest Defense Contract Management Agency

(DCMA) Office. In the event that a local Government representative or DCMA Office cannot be located, our purchasing agent should be notified immediately.

3.14.5 Any changes made by the Contractor to a qualified quality system will require re-submittal to the PCO and concurrence by the Government Quality Assurance Representative prior to adoption.

3.15 Contractor Inspection Requirements - The Contractor must maintain adequate records of all inspections and tests. The records must indicate the nature and number of observations made, the number and type of deficiencies found, the quantities approved and

rejected and the nature of corrective action taken as appropriate. Inspection records must be traceable to the material inspected.

3.15.1 The supplier's gages, measuring and test equipment must be made available for use by the Government representative when required to determine conformance with Contract requirements. When conditions warrant, the supplier's personnel must be made

available for operations of such devices and for verification of their accuracy and condition.

3.15.2 All documents and reference data applicable to this contract must be available for review by the Government representative. Copies of documents required for Government inspection purposes must be furnished in accordance with the instructions provided

by the Government representative.

3.16 Subcontractor Inspection Requirements - The Government has the right to inspect at source, any supplies or services that were not manufactured or performed within the contractor's facility. Such inspection can only be requested by or under authorization

of the Government representative. Any purchasing documents to a subcontractor must cite the applicable portions of the contractually invoked quality system (e.g. calibration requirements), plus any product requirements that apply to the supplies being

purchased. When the Government elects to perform source inspection at the subcontractor's facility, applicable purchase documents must be annotated with the following statement: "A Government inspection is required prior to shipment from your plant. Upon

receipt of this order, promptly notify the Government representative who normally services your plant so that appropriate planning for Government inspection can be accomplished. If you do not have an assigned Government representative, notify the nearest

Defense Contract Management Agency (DCMA) Office. In the event that a local Government representative or DCMA Office cannot be located, our purchasing agent should be notified immediately."

3.16.1 The prime contractor's program must include procedures to assess the capability of the prospective suppliers to produce the products or supply the services in accordance with the contract, prior to the issuance of any purchase document.

3.16.2 Each sub-tier supplier of material or services for items in Section 3 of this contract must be subjected to a periodic review or audit by the Prime to determine the continued capability of the supplier to control the quality of the products or services

specified in the purchase order or contract.

3.16.3 The prime contractor must ensure that the purchased product conformsto specified purchase requirements and this contract. The type and extent of control applied to the supplier and the purchased product must be dependent upon the effect of the

purchased product on the end item represented by this contract.

3.16.4 The prime contractor must evaluate the requirements of the contractand select suppliers based on their ability to supply the product in accordance with the prime contractor's requirements and the contract. Criteria for selection and evaluation must be

established. Records of this effort must be available for review by the government.

3.16.5 The prime contractor's supplier quality assurance program must provide for a review of purchase documents to assure applicable quality requirements are included or referenced in the documentation for compliance by the supplier.

3.17 Government Furnished Material and/or Equipment (GFM/GFE) - When material or equipment is furnished by the Government, the Contractor must develop documented control procedures that require at least the following:

3.17.1 Visual examination upon receipt to detect damage during transit.

3.17.2 Inspection for completeness and proper type.

3.17.3 Verification of material quality received.

3.17.4 Periodic inspection and precautions to assure adequate storage conditions and to guard against damage from handling and deterioration during storage.

3.17.5 Functional testing, either prior to or after installation, or both, as required by the Contract to determine satisfactory operation.

3.17.6 Identification and protection from improper use or disposition.

3.17.7 Reporting to the Government, any GFM or GFE property found damaged, malfunctioning, or otherwise unsuitable for use. In the event of damage or malfunction during or after installation, the supplier must determine and record probable cause and

necessity for withholding the material from use.

3.17.8 For GFE material, and as required by the terms of the bailment agreement, the supplier must establish procedures for adequate storage, maintenance, and inspection of bailed Government material. Records of all inspection and maintenance performed on

bailed property must be maintained.

3.17.9 Material returned to the contractor must be handled as GFM.

3.18 Traceability and Certification Requirements - To assure that correct materials are installed in Level I/SUBSAFE systems, it is imperative that traceability be maintained from the material to the material certification test report and other required

Objective Quality Evidence (OQE). The material certification report must completely and accurately reflect that the material supplied meets the specified requirements. Materials requiring Traceability and Certification Data are identified within Paragraph 3,

Section C of this contract/purchase order.

3.18.1 The following provides the minimum requirements for maintaining material traceability and supplements the requirements specified in DI-MISC-81020 and elsewhere in the contract/purchase order. The Contractor must develop written procedures that

implement the material control requirements stated herein and elsewhere in this Contract/Purchase Order.

3.19 Material Traceability - The certification data report must be identified through a unique traceability number, heat-lot number, or heat-treat number, as applicable, which must also be marked on the material. This traceability marking on the material must

provide direct traceability to the material's chemical composition and mechanical properties certification data. For material produced by batch, continuous cast, or continuous pour processes, samples must be taken no less than once in every eight hours of

operation for the purpose of validating proper chemical composition and mechanical properties. Traceability must be maintained through all process operations including any subcontracted operations, to the finished component.

3.19.1 Material Marking for Traceability and Identification - The following are the minimum marking requirements. Additional/alternate marking requirements, if applicable, will be specified elsewhere in the contract/purchase order. In addition to the

marking requirements on applicable drawings and/or specifications, marking for traceability is required. All traceability markings must be permanently applied in accordance with MIL-STD-792 (except as specified below). An alternate marking method is

permissible provided it is an available option in the contractually invoked specification or drawing, except in instances where the material has been modified by this contract/purchase order and differs from that specified in the specification or drawing.

3.19.2 Traceability markings for items with precision machined or plated surfaces, or material with suitable marking surface areas less than 3/8 inches square (either 3/8" x 3/8" or an area equal to 0.1406 inches square) must be applied to a durable tag and

the tag securely affixed to the material.

3.19.3 Traceability markings must be maintained through assembly, and whenever possible must be visible after assembly. For items where the marking is not visible after assembly, a durable tag must be securely attached to the assembly identifying the part

number, piece number, traceability number, and the location of the permanent mark.

3.19.4 Marking must be legible and must be located so as to not affect the form, fit, and function of the material. ; ;

3.20 See CDRL DI-MISC-81020 (Chemical and Mechanical) - Material Certification - In addition to the certification data requirements specified in DI-MISC-81020, the following material certification requirements apply:

3.20.1 Quantitative chemical and mechanical analysis of material traceable to traceability markings is required. Material certification test reports must include the class, form, condition, grade, type, finish, and/or composition, as applicable, of the

material supplied.

3.20.2 Re-identification and re-certification of material is required when the material is subjected to a process which alters it's properties. If the sta