Trash Rack at R. S. Kerr Powerhouse
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W912BV21R0009
- Agency
- ENDIST Tulsa US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332313 Plate Work Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks the fabrication of new trash rack assemblies and a lifting beam for the Robert S. Kerr Powerhouse located in Sallisaw, Oklahoma. The U.S. Army Corps of Engineers Tulsa District requires the replacement of existing steel trash racks and an associated lifting beam across four river intakes. The fabricated components must be constructed from structural steel per American Institute of Steel Construction standards by a certified fabricator using certified welders. Additionally, a multi-coat vinyl-type impacted immersion paint system is required for coating of all trash rack assemblies and the lifting beam. Proposals are due by June 1, 2021.
This is a total small business set-aside solicitation. The NAICS code is 332313 for plate work manufacturing with a small business size standard of 750 employees. The solicitation involves the fabrication of seventy-two individual trash rack assemblies measuring approximately 10'-6" high x 21'-4" long x 2'-2" wide and one lifting beam to be installed at the Robert S. Kerr Powerhouse located in Sallisaw, Oklahoma.
Notice text
Robert S. Kerr Powerhouse to replace the existing steel trash racks and the associated lifting beam. Funding has been approved for the fabrication of the new trash rack assemblies and lifting beam. The trash rack assemblies are located in front of the intake structure to prevent large debris from entering into the Powerhouse. Each of the four intakes utilizes eighteen individual trash racks, for a grand total of seventy-two trash racks.
The trash rack assemblies and lifting beam are to be fabricated out of structural steel members (bars, plates, channels, etc.) and be of welded construction. Each individual trash rack is approximately 10’-6” high x 21’-4” long x 2’-2” wide. The assemblies are to be fabricated by an AISC Certified Fabricator and certified welders. All trash rack assemblies and the lifting beam are to be coated with a multi-coat vinyl-type impacted immersion paint system.
Attachments
| File | Type | Posted |
|---|---|---|
| W912BV21R0009 - AM02.pdf | ||
| W912BV21R0009 - AM01.pdf | ||
| W912BV21R0009-Trash Rack.pdf | ||
| Drawings.pdf | ||
| W912BV21R0009 - Trash Rack.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| R. S. Kerr Trash Rack | Award Notice | |
| Trash Rack at R. S. Kerr Powerhouse | Solicitation | |
| New Trash Racks at RS Kerr Powerhouse | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity