Switch, Pressure

Added: Feb 08, 2010 4:28 pm This notice is to announce that this NSN will be solicited in the near future. This is not a Solicitation/Request for Proposal. The Solicitation/Request for Proposal will be forth comming and will be available via the DLA Internet Bid Board System (DIBBS). The website address (URL) is https://www.dibbs.bsm.dla.mil/rfp/. Please refer to the mentioned website for the complete solicitation. The response date referenced above is estimated. Solicitation issue date is on or about 23 February 2010 with the response date on or around 25 March 2010. Note: Copies of this solicitation will only be available via the world wide web. Hard copies of this solicitation are not available. All responsible sources may submit an offer/quote which shall be considered.



PURCHASE REQUEST NUMBER IS #IQC09320009059, NSN: 5930-00-621-4524, SWITCH, PRESSURE: QUANTITY IS INDEFINITE WITH A MINIMUM PURCHASE OF 50. UNIT OF ISSUE: EACH. PRICE BREAKS UP TO A QUANTITY OF 250 WILL BE REQUESTED. PURCHASE REQUEST WILL BE SOLICITED AS A SMALL BUSINESS SET-ASIDE.



ITEM DESCRIPTION FOR PR: IQC09320009059



SWITCH,PRESSURE



A.

A COMPLETE COMPETITIVE DATA PACKAGE CANNOT

BE DEVELOPED BECAUSE THE CONTROLLING DRAWING

AND/OR APPROVED SOURCE DATA ARE INSUFFICIENT

TO COMPLETELY DEFINE PERFORMANCE REQUIREMENTS.

B.

COMPLETE MECHANICAL, PHYSICAL, MATERIAL,

ENVIRONMENTAL, ELECTRICAL (IF APPLICABLE),

QUALIFICATION TESTING, SAMPLE QUANTITY AND

ACCEPTANCE TESTING REQUIREMENTS, INCLUDING

SAMPLING CRITERIA ARE INCOMPLETE OR MISSING.

C.

IF IT WERE POSSIBLE TO DEVELOP A COMPLETE

DATA PACKAGE, FIRST ARTICLE TESTING AND/OR

COMPATIBILITY TESTING WOULD MOST LIKELY BE

IMPOSED TO INSURE RECEIPT OF A SATISFACTORY

ALTERNATE.

D.

ALL POTENTIAL SOURCES MUST DEVELOP A DATA

PACKAGE THAT COMPLETELY DEFINES ALL THE AREAS

LISTED ABOVE AND MUST INCLUDE THEIR PROPOSED

TEST PLAN PATTERNED TO A TYPICAL (SIMILAR TYPE

ITEM) INDUSTRY STANDARD, MIL-SPEC OR

GOVERNMENT STANDARD QUALIFICATION AND ACCEPTANCE

TESTING REQUIREMENTS.

E.

ANY PROPOSALS RECEIVED THAT MEETS THE

ABOVE CRITERIA MUST BE EVALUATED BY A TECHNICAL

REPRESENTATIVE IN CONJUNCTION WITH THE ESA.

F.

CONTRACTORS FAILING TO SUBMIT AN OFFER IN

ACCORDANCE WITH THESE REQUIREMENTS SHOULD BE

CONSIDERED TECHNICALLY NONRESPONSIVE.



IF THE APPLICABLE (OEM OR MILITARY) DRAWING,

SPECIFICATION, STANDARD, OR QUALITY ASSURANCE

PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY

LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER

SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF

THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3)

DEFECTS AND REJECT ON (4) DEFECTS, THE NEW

ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS

AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN

THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE

SAMPLE SIZE REMAINS THE SAME.



ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.



FULL AND OPEN COMPETITION APPLIES.



CRITICAL APPLICATION ITEM





EATON AEROSPACE LLC (02750) P/N 6599-1

UNITED ELECTRIC CONTROLS COMPANY (14314) P/N DM24M-H1

SIGMA-NETICS, INC. (24038) P/N 701674

HYDRA-ELECTRIC COMPANY (98505) P/N 40088

LOCKHEED MARTIN CORPORATION (98897) P/N 695683-1



PRLI 0001 197 EA



PREP FOR DELIVERY:



PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 31: CLNG/DRY = 1: PRESV MAT = 00:

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = O:

INTRMDTE CONT = DO: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - 00 No special marking



For all shipments of packaged materiel to the government,

which includes either Depot (DLA-Direct) or DVD (Customer-

Direct) shipments, both DoD linear and two-dimensional (2D)

bar code markings are required on Military Shipping Labels

in accordance with MIL-STD-129, Revision P, dated December

15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the

requirement for MSL and 2D symbols). See the DLA packaging

web site identified in DLAD 52.211-9010(E) for change

notices to MIL-STD-129P that apply. 2D bar coding shall be

in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3)

and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar

coding shall be in accordance with ISO/IEC 16388. Shipping

label stock quality shall meet MIL-PRF-61002. Bar code print

quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000)

for applicable 2D and/or linear bar codes. All DVD shipments

shall meet additional linear bar coding requirements in DLAD

52.211-9010(C). Except for the Transportation Control Number

(TCN), which must always be present on the Military Shipping

Label, when the contract/order omits any other data elements as

defined in MIL-STD-129P and if the information is not available

from the Administrative Contracting Office, then the field is

not required as part of the Military Shipping Label and may be

left blank. If there are inconsistencies between the schedule

and MIL-STD-129P, the schedule takes precedence.





PARCEL POST/FREIGHT ADDRESS:



Various DLA Stock Depots