Spring wire support

Added: Apr 14, 2016 11:27 am Modified: Apr 18, 2016 9:42 amTrack Changes  

Federal Business Opportunities (FedBizOpps) Synopsis Information Form

 

1.  ACTION CODE:  (X  ) P = Presolicitation   (   ) M = Modification to a Previous Presolicitation Notice

2.  CLASSIFICATION CODE: 1710

3.  NAICS CODE: 336413

4.  TITLE: Spring, Wire Support

5.  RESPONSE DATE: 5-30-16

6.  PRIMARY POINT OF CONTACT: RYAN GULICK

7.  SECONDARY POINT OF CONTACT:

8.  SOLICITATION NUMBER: SPM7M2-16-R-00330001

9.  DESCRIPTION:

 

                NSN(s): 1710-00-626-3917

 

                Item Description:

 

 

****************PID**********************

SPRING WIRE SUPPORT

82N CAI

 

THE FOLLOWING DRAWINGS-DOCUMENTS APPLY TO THIS NSN:

 

DWG-80020-402111(REV AF)

DWG-CN006263917(REV A)

QAP-SQAP006263917FAT

QAP-SQAP006263917QA

QAP-CDRL-15-12060PTI

QAP-CDRL-15-12060COQC

QAP-CDRL-15-12060FAT

THD-TDR-15-12060(EXP 5/14/2018)

 

PER NAVAIR: TEMPERATURE SHALL BE BETWEEN 760-780 DEGREES FOR TEMPERING

OF THESE PARTS.

 

If this NSN provides Contract Data Requirement Lists (CDRLs) as part of

the Technical Data Package, the line items from this solicitation are

not to be separately priced.  Offerors must factor into the end item

unit price all costs associated with the preparation and delivery of the

data deliverables in the contract.

 

 

 

 

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

 

 

PCO MANDATORY INSPECTION. DURING PRODUCTION,

MANDATORY INSPECTION IS REQUIRED TO BE

ACCOMPLISHED AND DOCUMENTED BY THE CONTRACTOR AS

FOLLOWS:

.

CRITICAL AND MAJOR CHARACTERISTICS AS IDENTIFIED

IN CLASSIFICATION OF CHARACTERISTICS BLOCK ON

DRAWING(S), TECHNICAL SPECIFICATIONS, SECOND

TIER DOCUMENTS REFERENCED IN THE ACQUISITION

ITEM DESCRIPTION AND SPECIFIED IN THE

PROCUREMENT DOCUMENT, AND CHARACTERISTICS

DEFINED AS:

(A) MATERIAL CERTIFICATIONS

(B) DESTRUCTIVE AND / OR NONDESTRUCTIVE

TEST RESULTS (WHEN APPLICABLE)

(C) ATTRIBUTES FOR PLATING HARDNESS

.

IMPORTANT MINOR CHARACTERISTICS SHALL BE

DEFINED BY THE CONTRACTOR SUBJECT TO QAR

CONCURRENCE, UNLESS OTHERWISE DEFINED ON

APPLICABLE DRAWING(S), SPECIFICATIONS

AND CHARRACTERISTICS DEFINED AS:

(A) DIAMETRICAL AND LINEAR DIMENSIONS

HAVING A TOLERANCE OF +/- 0.005 INCH OR

LESS

(B) GEOMETRIC FEATURE CONTROLS HAVING A TOTAL

TOLERANCE OF 0.003 INCH OR LESS

(C) SURFACE FINISHES HAVING A 16 VALUE OR LESS

(D) CLASS THREE THREADS

(E) ANGULAR TOLERANCES WITH A TOTAL RANGE LESS

THAN 1 DEGREE

.

LEVEL OF INSPECTION: ANSI / ASQC Z1.4 FOR SINGLE

SAMPLING USING A GENERAL INSPECTION LEVEL O II

(A) CRITICAL AND MAJOR CHARACTERISTICS: 100%

INSPECTION APPLIES

(B) IMPORTANT MINOR CHARACTERISTICS: AQL OF 1.5

.

CERTIFICATION / DATA REPORTS: THE CONTRACTOR IS

RESPONSIBLE FOR PREPARING A CERTIFICATE OF

QUALITY COMPLIANCE (COQC) IN ACCORDANCE WITH THE

DD FORM 1423 CONTRACT DATA REQUIREMENTS LIST

(CDRL). THE COQC CONTENT WILL INCLUDE AS A

MINIMUM THE DATA DESCRIBED IN DLAR CLAUSE

52.246-9000, IN ADDITION TO ALL PCO MANDATORY

INSPECTION RESULTS. THIS COQC REQUIREMENT

APPLIES TO EACH UNIT OF CONTRACT QUANTITY.

 

 

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

 

 

CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE, IS

NOT AUTHORIZED FOR THIS NSN.

 

 

 

 

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO

INTERNATIONAL AGREEMENTS.

 

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY

CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE

WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

 

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

 

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

 

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO

RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

 

NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

 

 

 

REMINDER: THIS IS A CRITICAL ITEM AND ALL

MAJOR AND MINOR WAIVER/DEVIATION REQUESTS MUST

BE FORWARDED TO THE DSCC CONTRACTING OFFICER WHO

WILL COORDINATE THE REVIEW AND APPROVAL THROUGH

THE RESPONSIBLE ENGINEERING SERVICE ACTIVITY.

 

 

"CERTIFICATE OF QUALITY COMPLIANCE IS MANDATORY"

 

 

AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE)

.

CRITICAL APPLICATION ITEM.

.

ALL REQUESTS FOR WAIVERS OR DEVIATIONS

CLASSIFIED AS CRITICAL, MAJOR, OR MINOR MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER FOR

REVIEW AND APPROVAL.

.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129.  IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

 

CRITICAL APPLICATION ITEM

 

PODCON, INC. DBA METLAB 07780 P/N 402111-2

LASER MANUFACTURING INC 1WL29 P/N 402111-2

 

IAW REFERENCE DRAWING NR 80020 402111

REVISION NR AF  DTD 05/13/2015

PART PIECE NUMBER: 402111-2

 

IAW REFERENCE DRAWING NR 80020 MPR1033

REVISION NR G   DTD 01/15/2015

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 80020 MPR1221

REVISION NR R   DTD 10/01/2001

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 16236 CN006263917

REVISION NR A   DTD 06/23/2015

PART PIECE NUMBER:

 

IAW REFERENCE QAP 80020 CDRL-15-12060COQC

REVISION NR     DTD 05/19/2015

PART PIECE NUMBER:

 

IAW REFERENCE QAP 80020 CDRL-15-12060FAT

REVISION NR     DTD 05/19/2015

PART PIECE NUMBER:

 

IAW REFERENCE QAP 80020 CDRL-15-12060PTI

REVISION NR     DTD 05/19/2015

PART PIECE NUMBER:

 

IAW REFERENCE QAP 16236 SQAP006263917CFAT

REVISION NR     DTD 06/23/2015

PART PIECE NUMBER:

 

IAW REFERENCE QAP 16236 SQAP006263917QA

REVISION NR     DTD 06/23/2015

PART PIECE NUMBER:

 

 

 

 

 

******PAK Data**********

 

 

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001  PRES MTHD:20  CLNG/DRY:1  PRESV MAT:49

WRAP MAT:GB  CUSH/DUNN MAT:00  CUSH/DUNN THKNESS:0

UNIT CONT:ED  OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

 

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

 

EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,

CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE

CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.

 

ZZ -ADDITIONAL SPECIAL MARKING:

 

Quantity :  574, QUATITY BREAKS 1 - 150, 151-300, 301-450, 451-574. 

 

 

Unit of Issue:  EA

 

Destination Information: INSPECTION AND ACCEPTANCE AT ORIGIN, FOB ORIGIN.

 

Delivery Schedule: 365 DAYS

 

All responsible sources may submit an offer/quote which shall be considered.

 

 One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979.

 

 All offers shall be in the English language and in U.S. dollars.

 

 All interested suppliers may submit an offer.

 

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice

 

The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation. During the course of the on-line auction, offerors' proposed prices will be publicly disclosed to other offerors and anyone else having access to the on-line auction. This public disclosure is anonymous, meaning that each offeror's identity will be concealed from other offerors (although it will be known to the Government), and only generic identifiers will be used publicly for each offeror's proposed pricing (e.g., "Offeror A"). By submitting a proposal in response to the solicitation, offerors agree to participate in the Reverse Auction and that their prices may be publicly disclosed, including to other offerors, during the Reverse Auction. An offeror's final auction price will be considered its final proposal revision. No price revisions will be accepted after the close of the Reverse Auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with FAR 15.307.

 

 

The solicitation will be available in FedBizOpps on its issue date of  4-13-15.

 

 The Small Business size standard is  500 employees.

 

Specifications, plans or drawings are not available.

 

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data;  therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved sources are:  Metlab and Laser.

 

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.