Socket head cap screws

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at FAR 13.5, as supplemented with the additional information included in this notice.  This announcement constitutes the only solicitation; a written solicitation will not be issued.  PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov.  The RFQ number is (SPMYM324Q6039). This solicitation documents and incorporates provisions and clauses in effect through FAC 2024-05 May 22, 2024, and DFARS Change Notice 20240530. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.  The clauses may be accessed in full text at this address:  https://www.ecfr.gov  and  https://www.acquisition.gov/content/list-sections-affected  and  http://www.acq.osd.mil/dpap/dars/change_notices.html.

The FSC Code is (5305) and the NAICS code is (332722). The Small Business Standard is (600). This requirement is being processed utilizing (100% Small Business Set-Aside).

Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility.  Potential contractors will be screened for responsibility in accordance with FAR 9.104. 

Offerors are required to submit descriptive literature to show how their quotation meets the required specifications.  Failure to provide this information may result in your quotation being determined technically unacceptable.

RFQ 24Q6039 REQURIED to be filled out and returned to Jannell.moriarty@dla.mil to be considered for award.

 The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:

0001     SOCKET HEAD SELF-LOCKING CAP

            SCREW                                                           64     EA         

            SOCKET HEAD SELF-LOCKING CAP SCREW,

            0.500-20UNF-3A X 1.50 IN. LG. MFR IAW MIL-DTL-1222 TY II. **TEST PROCEDURE SHALL BE PERFORMED IAW SECTION 4 OF MIL-DTL-1222J, SUBSTITUTING THE MECHANICAL PROPERTY

            REQUIREMENTS WITH CRES TYPE 630 CONDITION H1075 IN TABLE 4 OF ASTM A564. NOTE THAT TESTING AND INSPECTION REQUIREMENTS FOR SOCKET HEAD CAP SCREWS ARE SPECIFIED IN TABLE 11 THROUGH 14 OF MIL-DTL-1222J. ALSO NOTE THAT TESTING ARE ONLY REQUIRED TO MEET THE MINIMUM MECHANICAL PROPERTIES. MATERIAL IS CRES GRADE 630 IAW ASTM A564M AND SHALL BE AGE HARDENED AT 1075 DEGREE FARENHEIT. SELF-LOCKING IAW MIL-DTL-18240F AMEND 1 TYPE “ANY” MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED ORDEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER(TOP PREFERRED. SIDE LOCATION IF NECESSARY).

0002     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A001        EXHIBIT A, SEQ A001

            SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)

0003     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A002        EXHIBIT A, SEQ A002

            SEE EXHIBIT “A” SEQ A002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)

0004     SOCKET HEAD SELF-LOCKING CAP

            SCREW                                                           128    EA         

            SAME AS ITEM 0001

0005     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A001        EXHIBIT A, SEQ A001

            SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)

0006     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A002        EXHIBIT A, SEQ A002

            SEE EXHIBIT “A” SEQ A002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)

0007     SOCKET FLAT COUNTERSUNK HEAD

            SLF LKG CAP SCREW ANGLE                      24     EA         

            SOCKET FLAT COUNTERSUNK HEAD SELF-LOCKING CAP SCREW ANGLE, 0.625-11UNRC-3A X 2.250 IN. LG. MFR IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MAT’L IS NICU ALLOY, QQ-N-281D AMEND 2. SELFLOCKING IAW MIL-DTL-18240F AMEND 1 TYPE “N”. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF

            NECESSARY).

0008     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A001        EXHIBIT A, SEQ A001

            SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)

0009     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A002        EXHIBIT A, SEQ A002

            SEE EXHIBIT “A” SEQ A002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)

0011     SOCKET FLAT COUNTERSUNK HEAD

CAP SCREW ANGLE                                      12        EA      

            SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

            ANGLE, 1.250-7UNRC-3A X 3.250 IN. LG. MFR IAW FF-S-86H TYPE IV.

            NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR.

            FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X

            NOT TABLE VIII. ALSO NOTE THAT PARA 3.5.6 OF FF-S-86H IS IN

            ERROR AND THAT MATERIAL MARKINGS ON THE HEAD OF

            THE FASTENERS TO BE “ ·K· ” NOT JUST K. MAT’L IS NICUAL

            ALLOY, QQ-N-286G.

0012     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A001        EXHIBIT A, SEQ A001

            SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE)

0013     DATA REQUIREMENTS FOR CLIN 0001       1       EA         

            A002        EXHIBIT A, SEQ A002

            SEE EXHIBIT “A” SEQ A002: CDRL DI-MISC-80678 (CERTIFICATE / DATA REPORT)

NOTE:  OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24, 52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH

THEIR OFFER.

A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB Program; or

(E) Historically underutilized business zone small business.

FAR CLAUSES AND PROVISIONS

52.204-7, System for Award Maintenance

52.204-9, Personal Identity Verification of Contractor Personnel

52.204-13, SAM Maintenance

52.204-19, Incorporation by Reference of Representations and Certifications

52.204-24* See Attachment for this provision

52.204-26* See Attachment for this provision

52.204-29 FASCSA Representation* See Attachment for this provision

52.211-14, Notice of Priority Rating

52.211-15, Defense Priority And Allocation Requirements

52.211-17, Delivery of Excess Quantities

52.212-1, Instructions to Offerors - Commercial Items;

52.212-3, Offeror Reps and Certs

52.212-4, Contract Terms and Conditions – Commercial Items

52.219-1 Alt 1 Small Business Program Representations

52.222-22, Previous Contracts & Compliance Reports

52.222-25, Affirmative Action Compliance

52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation

52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs

52.232-39, Unenforceability of Unauthorized Obligations

52.233-2 Service of Protest

52.242-13 Bankruptcy

52.242-15 Stop Work Order

52.243-1, Changes Fixed Price

52.246-1, Contractor Inspection Requirements

52.247-34, F.O.B-Destination

52.252-1 Solicitation Provisions Incorporated by Reference

52.252-2 Clauses Incorporated by Reference

52.253-1, Computer Generated Forms

52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement:

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

52.233-3, Protest After Award

52.233-4, Applicable Law for Breach of Contract Claim

52.204-10

Reporting Executive Compensation

52.204-27

Prohibition on a ByteDance Covered Application

52.204-30

FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition

52.209-6

Protecting the Government's Interest

52.219-6

Notice of Total Small Business Set-Aside

52.219-28

Post-Award Small Business Program Representation

52.222-3

Convict Labor

52.222-19

Child Labor

52.222-21

Prohibition of Segregated Facilities

52.222-26

Equal Opportunity

52.222-36

Equal Opportunity for Workers with Disabilities

52.223-11

Ozone Depleting Substances

52.223-18

Encouraging Contractors to Ban Text Messaging While Driving

52.225-3

Buy American-Free Trade Agreements

52.225-5

Trade Agreements

52.225-13

Restriction on Certain Foreign Purchases

52.232-33

Payment by EFT-SAM

52.232-36

Payment by Third Party

DFARS CLAUSES AND PROVISIONS

252.203-7000 Requirements Relating to Compensation of Former DoD Officials,

252.203-7002, Requirement to Inform Employees of Whistleblower Rights

252.203-7005 Representation Relating to Compensation of Former DoD Officials

252.204-7003. Control of Government Personnel Work Product

252.204-7004 Antiterrorism Awareness Training for Contractors.

252.204-7008 Compliance With Safeguarding Covered Defense Information Controls

252.204-7012, Safeguarding of Unclassified Controlled Technical Information Deviation 2016 O0001)

252.204-7015, Disclosure of Information to Litigation Support Contractors

252.204-7016, * See Attachment for this provision.

252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation

252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

252.204-7019, *See Attachment for this provision.

252.204-7020,  NIST SP 800-171 DoD Assessment Requirements

252.204-7024 Notice on the Use of the Supplier Performance Risk System

252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability

252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.

252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7008  Prohibition of Hexavalent Chromium

252.225-7001 Buy American and Balance of Payments Program

252.225-7002 Qualifying Country Sources as Subcontractors

252.225-7048, Export Controlled Items

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

252.231-7000, Supplemental Cost Principles.

252.232-7003, Electronic Submission of Payment Requests

252.232-7006, Wide Area Workflow Payment Instructions

252.232-7010, Levies on Contract Payments

252.243-7001, Pricing of Contract Modifications

252.243-7002, Requests for Equitable Adjustment

252.244-7000, Subcontracts for Commercial Items

252.247-7023, Transportation of Supplies By Sea

Note: Vendor shall list the country of origin for each line item.

DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)
 

52.233-9001, Disputes:  Agreement to Use Alternative Disputes Resolution

DLA PROCUREMENT NOTES (See Attachment for Full Text)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)

C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017)

C20 Vendor Shipment Module (VSM) (AUG 2017)

E05 Product Verification Testing (JUN 2018)

G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017)

H10 Awardee Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020)

L06 Agency Protests (DEC 2016)

L31 Additive Manufacturing (JUN 2018)

LOCAL CLAUSES (See Attachment for Full Text):

YM3 A1: Additional Information

YM3 C500: Mercury Control (Supplies)

YM3 C501: Correction of Certifications

YM3 C524: Controlled Industrial Material

YM3 C528: Specification Changes

YM3 D2.2: Marking of Shipments

YM3 D4: Preparation for Delivery

YM3 D8: Prohibited Packing Materials

YM3 E2: Inspection and Acceptance (Destination)

YM3 E504: Notice of Constructive Acceptance Period

YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard

YM3 H500: Special Provisions for Threaded Products

YM3 M8: Single Award for All Items

Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM.

This announcement will close (June 28th, 2024).  The Point of Contact for this solicitation is (Jannell Moriarty) who can be reached at (jannell.moriarty@dla.mil). All responsible sources may submit a quote which shall be considered by the agency.  

System for Award Management (SAM).  Quoters must be registered in the SAM database to be considered for award.  Registration is free and can be completed online at http://www.sam.gov/.

If not the actual  manufacturer –  Manufacturer’s Name, Location, and Business Size must be provided.

Please submit quotations via email at (jannell.moriarty@dla.mil).

Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL

All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

******* END OF COMBINED SYNOPSIS/SOLICIT