Sewer Maintenance Truck

SEWER MAINTENANCE TRUCK MCB Camp Butler, Okinawa Japan

Multi Vacuum Truck

Kato Multi Vacuum truck 5 ton Model MV-600S or Equal

Vacuum Truck 5 ton, Diesel Engine Drive.

All vehicles shall be the newest model and year at the time of delivery and
ready for use.

Vehicle/Equipment and furnished accessories shall comply with Japanese Motor
Vehicle Safety Standards, including, but not limited to, exhaust emission
control requirement, in effect on the date of manufacture.

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity: One (1) each.   

(2) MINIMUM DIMENSIONS 
(1)     Overall length:    6710mm                             
(2)     Overall width:     2350mm                         
(3)     Overall Height:   2980mm
(4)     Tank volume:     6.3 Cubic meter
(5)     Vehicle loading capacity: 5.3 Ton

(3) Exterior Color:  Manufacturer's standard color yellow.

(4) Rust Proofing and Under Coating: Extra anticorrosive from sea water
damage.

OTHER MISCELLANEOUS REQUIREMENTS

(1) Brower: KMS-510

(2) Electric motor type water pump

(3) Water tank: Manufacturer's standard 100L or more.

(4) Suction valve and Hose size 5 inch.

(5) Storage basket: Right (950mm x 350mm x 250mm) Left (440mm x 410mm x
510mm)

(6) Suction and discharge hose: 4 inch, 20m, with female cam lock.

(7) Rear fender iron

(8)  Back View/ Side View Camera with a Color Monitor in the Operator's Cab.

(9)  Tire Marker Lamps: Manufacture's standard lamps shall be installed on
both sides of wheel house. (1 each x 2 sides).

(10)  Fire Extinguisher and Storage Bracket: Shall be installed in the
operator's cab.

(11) Drive Type: Manufacture's standard

(9)   Accessories: Shall be the type installed on manufacture's standard
domestic production model.

(10) Warranty: Manufacturer's standard. The warranty work will be provided
by dealers in Okinawa area, Japan with Government personnel providing
Quality Assurance of all work. All warranty work to include the
Manufacturer's warranty term inspections shall be conducted at no cost to
the government to include parts, labor and transportation. Any warranty work
performed to include warranty term inspections and breakdowns repairs shall
be documented in detail to include the repair procedure and the parts
installed at no extra cost to the government.

(11) Certificate of Transfer (in Japanese): For each vehicle to be furnished
for consignee by Contractor at time of vehicle(s) delivery.

(12) Technical Publications (in Japanese):  one (1) sets of operator's
manuals (In Japanese), one (1) sets of Technical (shop repair) manuals and
parts catalog (In Japanese) for the Sweeper, to be furnished upon delivery
of the Sweeper by Contractor (Japanese operator's manuals, technical manuals
and parts catalog must be delivered to government at least 60 days before
delivery of the crane).

(13) SAFETY. Each piece of equipment installed on the Sweeper shall comply
with Japanese Industrial Standard safety requirements. 

G.      DELIVERY POINT:  All transportation charges borne by the contractor
to;

Okinawa-ken, Nakagami-gun, Chatan-cho, Zukeran, Camp Foster
Bldg. No.: 5832
Commanding General (DODAAC M67400)
Marine Corps Base butler (code G-4/GME)

Ship to mark for:  G-4/GME, Unit 35001 BLDG #5832
                               POC: Joseph Vilailack
                               COMM: 098-970-3778
                     EMAIL: joseph.vilailack@usmc.mil

H.      DELIVERY DATE:  The vehicle shall be delivered at the delivery point
specified above within 240 days from the date of contract.

I.      INSPECTION AND ACCEPTANCE:  Final inspection and acceptance of the
vehicle furnished hereunder will be made on Standard Form 1449, block 32a
through 41c, by the receiving officer or his authorized representative at
the time and place of delivery as specified.