Scan Eagle
Awarded Award Notice Posted
- Solicitation number
- N6893616T0242
- Agency
- Naval Air Warfare Center Naval Air Systems Command, Department of Defense
- Awarded
- to Digital Receiver Technology, Inc.
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- N6893616P0582 Federal contract award
- NAICS code
- 811213 Communication Equipment Repair and Maintenance
- PSC
- Not on record
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
The Naval Air Warfare Center, Weapons Division, China Lake, CA intends to procure on an other than full and open competition basis the following items: 1). Engineering tool for Rolling Codes needs to be modified to allow complete manual operation using an S3 payload. 2). 200 Hours of support to update Calibration Tables and support new software plugins with the use of hardware upgrade. This requirement is sole sourced to Digital Receiver Technologies 12409 Milestone Center Drive. Germantown, MD 20876 due to DRT being manufacturer that developed rolling code system. Calibration tables must be stimulated and generated using existing DRT software and algorithms. Any firms believing that they can provide the materials may submit a written response to be received at the Contracting Office no later than 5 days after the date of publication of this notice. It must clearly show the firm's ability to be responsive without compromising the quality, accuracy or reliability of the materials without causing programmatic hardship. All responsible sources may submit a quotation which shall be considered by the agency. Respond to Erika Martin, by email erika.m.martin@navy.mil, fax to (760) 939-3095, or mail to Commander NAWCWD Code 254200D, Attn: Erika Martin, 429 E Bowen Ave, MS 4015, China Lake, CA 93555-6108.
*PROCUREMENT TYPE
Requirement is being advertised as sole source or competitive in accordance with FAR 6.302.1.
All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/.
Written responses shall be submitted by e-mail to the point(s) of contact listed below or mailed to the Contracting Office Address listed below no later than 5 days from this notice date. (POCs information auto-populates via table above.)
Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information within FBO. See the DLIS website for registration details: http://www.dlis.dla.mil/jcp/.
.
Update #1 ·
Added: Jun 13, 2016 12:52 pm
The Naval Air Warfare Center, Weapons Division, China Lake, CA intends to procure on an other than full and open competition basis the following items: 1). Engineering tool for Rolling Codes needs to be modified to allow complete manual operation using an S3 payload. 2). 200 Hours of support to update Calibration Tables and support new software plugins with the use of hardware upgrade. This requirement is sole sourced to Digital Receiver Technologies 12409 Milestone Center Drive. Germantown, MD 20876 due to DRT being manufacturer that developed rolling code system. Calibration tables must be stimulated and generated using existing DRT software and algorithms. Any firms believing that they can provide the materials may submit a written response to be received at the Contracting Office no later than 5 days after the date of publication of this notice. It must clearly show the firm's ability to be responsive without compromising the quality, accuracy or reliability of the materials without causing programmatic hardship. All responsible sources may submit a quotation which shall be considered by the agency. Respond to Erika Martin, by email erika.m.martin@navy.mil, fax to (760) 939-3095, or mail to Commander NAWCWD Code 254200D, Attn: Erika Martin, 429 E Bowen Ave, MS 4015, China Lake, CA 93555-6108.
*PROCUREMENT TYPE
Requirement is being advertised as sole source or competitive in accordance with FAR 6.302.1.
All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/.
Written responses shall be submitted by e-mail to the point(s) of contact listed below or mailed to the Contracting Office Address listed below no later than 5 days from this notice date. (POCs information auto-populates via table above.)
Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information within FBO. See the DLIS website for registration details: http://www.dlis.dla.mil/jcp/.
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity