Restrictor, Fluid Flow

National Stock Number (NSN): 4730-01-190-3154

Item Name: Restrictor, Fluid Flow

Destination Information: Various DLA Stocking Locations

AMC/AMSC Code: 1B*
NAICS Code: 332996 – Fabricated Pipe and Pipe Fitting Manufacturing

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Freight on Board (FOB) will be at Origin and Inspection/Acceptance will be at Destination.The proposed procurement will be a Long Term Contract (LTC). The duration of the contract will be for a total of five (5) years, consisting of three (3) base years, and two (2) option years. The option years may be exercised at the discretion of the Government. The required delivery is 105 days. The Procurement Item Description (PID) for this NSN can be found at the end of this document.

Based upon market research, the Government is using the policies contained in FAR Part 15 – Contracting by Negotiation - in its solicitation for the described supplies or services.

This will be solicited as a Total Small Business Set-Aside. The solicitation will be posted to the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about February 7. 2020. Specifications, plans or drawings are not available.

RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 9 of Page 1 of Standard Form 33 (Solicitation, Offer and Award). All responsible sources may submit an offer/proposal, which shall be considered.

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance, as described in the solicitation.

One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.

* Acquisition Method Code (AMC) / Acquisition Method Suffix Code (AMSC) Description:

• AMC 1: Suitable for competitive acquisition for the second or subsequent time.
• AMSC B: This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid.
   

 

 

STO CS001 – Export Control

 

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export.  Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad.  This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures.  Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.  In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration.  If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis.  Failure to comply timely with required information may result in lack of consideration for DLA solicitations.  It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence.  DLA will work diligently on validating vendor requests.  Vendors will be notified within 3 business days of when their requests were approved.  However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses

Product Item Description (PID), Packaging & Marking

CM19031005 PID as of 1/22/20

-

*** LTC PID Packaging Consolidated Text ***

-

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 4730-01-190-3154

     RESTRICTOR,FLUID FLOW.

     REFERENCE NUMBER:RP001

     REFERENCE NUMBER:RD002

    

     REFERENCE NUMBER:RA001

     REFERENCE NUMBER:RQ011

     REFERENCE NUMBER:CS001

     REFERENCE NUMBER:CS187

     REFERENCE NUMBER:CS120

     CRITICAL APPLICATION ITEM

     Lee Company, The 92555 P/N JEBX0501700A

     IAW BASIC DRAWING NR 78286 70450-01800

     REVISION NR AY  DTD 07/24/2008

     PART PIECE NUMBER: 70450-01800-102

     IAW REFERENCE DRAWING NR 78286 70450-01800

     REVISION NR C   DTD 10/25/2004

     PART PIECE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

*************************************************************************************

 

GLOSSARY

 

*************************************************************************************

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

     All DLA Master List of Technical and Quality Requirements take

     precedence over ASTM D3951.

     Mark and label all packaging and packing in accordance with MIL-STD-129.

     The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as

     specified in the contract/purchase order.

ITEM DESCRIPTION TEXT

     REFERENCE NUMBER RP001

     RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER RD002

     RD002, COVERED DEFENSE INFORMATION APPLIES:

     This national stock number and/or associated data has been determined

     to contain, utilize, or generate covered defense information (CDI). CDI

     is unclassified controlled technical information or other information,

     as described in the controlled unclassified information (CUI) registry

     that requires safeguarding pursuant to DFARS 252.204-7012.

     REFERENCE NUMBER RA001

     RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

     REFERENCE NUMBER RQ011

     RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

     REFERENCE NUMBER CS001

     EXPORT CONTROL OF TECHNICAL DATA:

     This item has technical data some or all of which is subject to

     export-control of either the International Traffic in Arms regulations

     (ITAR) or the Export Administration Regulations (EAR), and cannot be

     exported without prior authorization from either the Department of State

     or the Department of Commerce.  Export includes disclosure of technical

     data to foreign persons and nationals whether located in the United

     States or abroad.  This requirement applies equally to foreign national

     employees and U.S. companies and their foreign subsidiaries. DFARS

     252.225-7048 is applicable to this data.

     The Defense Logistics Agency (DLA) limits distribution of export-control

     technical data to DLA contractors that have an approved US/Canada Joint

     Certification Program (JCP) certification, have completed the

     Introduction to Proper Handling of DOD Export-Controlled Technical Data

     Training and the DLA Export-Controlled Technical Data Questionnaire

     (both are available at the web address given below), and have been

     approved by the DLA controlling authority to access the

     export-controlled data.  Instructions for obtaining access to the

     export-controlled data can be found at:

     https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

     To be eligible for award, offerors and any sources of supply proposed

     for use are required to have an approved JCP certification and have

     been approved by the DLA controlling authority to access

     export-controlled data managed by DLA.  DLA will not delay award in

     order for an offeror or its supplier to apply for and receive approval

     by the DLA controlling authority to access the export-controlled data.

     REFERENCE NUMBER CS187

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

     USED NOR INCORPORATED IN ANY ITEMS TO BE

     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

     SPECIFICATION REQUIREMENTS.

     REFERENCE NUMBER CS120

     NOTE:  THE CITED DRAWING IS A SOURCE CONTROLLED

     DRAWING AND AS OF THE DATE OF THIS SOLICITATION

     ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

     BEEN APPROVED.  EVEN THOUGH SOURCES AND APPROVED

     PART NUMBERS ARE PROVIDED, THE ITEMS

     FURNISHED MUST MEET THE REQUIREMENTS OF THE

     CITED DRAWING.  OFFERORS WHO ARE INTERESTED IN

     QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

     ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

     ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

     DRAWING.

     ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

     THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

     THIS TIME.