Relocatable personal duty lockers and caging

Added: Jun 19, 2017 3:44 pm Modified: Jul 13, 2017 5:15 pmTrack Changes SOLICITATION: 
W5800P71570150
AGENCY/OFFICE:
Utah National Guard/USPFO
DELIVERY AND INSTALLATION LOCATIONS:
Utah Army National Guard, 489th A Co, 525 W 1000 S Mount Pleasant, UT 84647
Utah Army National Guard, 489th A Co, C R 204A, Blanding, UT 84511
Utah Army National Guard, 624th EN CO, 584 N 500 E, Price, UT 84501
SUBJECT:
Relocatable Personal Duty Lockers and Caging
RESPONSE DUE DATE:
12:00 PM MST 27 July 2017
CONTRACTING POC:
William (Billy) T. Brown III Email: William.t.brown68.civ@mail.mil Phone: 8014324273

DESCRIPTION 
 
***Due to the complex and technical nature of this requirement, it is being re-solicited again for 14 days and will require a site visit for interested vendors to one of the listed locations above.  Site visit will be scheduled once this solicitation closes***

The Utah National Guard has a requirement that will be filled under combined synopsis/solicitation W5800P71570150 and is being issued for Request for Quotations (RFQ).  This procurement is being solicited under NAICS code 337215, Showcase, Partition, Shelving, and Locker Manufacturing.  NAICS code 332999, All other Miscellaneous Fabricated Metal Product Manufacturing will also be accepted.  This award should be able to be filled by a single vendor.  This requirement calls for the purchase, delivery, and installation of Relocatable Personal Duty Lockers at 3 (three) different Utah National Guard locations (Mount Pleasant, Blanding, and Price).  Price location does not require installation charges. Additionally, Mount Pleasant location requires caging delivered and installed.  The winning vendor must be able to deliver & install all items listed below 90 Days ARO.

Minimal requirements for Unit OCIE lockers to meet technical acceptability:
a) Diamond perforated double wall doors welded together
b) Stainless steel lock plate with hasp, handle, and number plaque
c) Powder coat paint
d) Full length 16 gauge door hinges
e) Welded 18 gauge (minimum) frames-top, bottom, sides, and back. No main rivets on main structure
f) Interior side panel lances every 3 inches to allow addition of internal components
g) Lockers are required to match existing lockers for maneuverability and repositioning
h) Lockers and caging must be delivered and installed 90 Days ARO

Dimensions, quantities, and location:

1) Mount Pleasant location
     i. Locker numbers and dimensions
          A. 37 ea. 3 tier lockers, 30" x 30" x 84", total of 111 openings
          B. 7 ea. 2 tier lockers, 18" x 24" x 84", total of 14 openings
     ii. Caging numbers and dimensions
          A. 3 ea. 10' wide x 11' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide
              x 7' high sliding door with hasp locks per cage
          B. 2 ea. 12' wide x 8' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide x
              7' high sliding door with hasp locks per cage
     iii. Bids will include shipping and installation of lockers and caging
2) Blanding location
     i. Locker numbers and dimensions
          A. 17 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 51 openings
     ii. Bids will include shipping and installation of lockers.
3) Price location
      i. Locker numbers and dimensions
          A. 28 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 84 openings
     ii. Bids will include shipping of lockers (installation at this location not required)

Evaluations Factors: The contract type for this procurement will be firm-fixed price and award evaluation shall be made on the basis of Best Value. A Best Value quote is one that meets all the technical aspects of this requirement while providing the best value to the govnerment.  A Best Quote may not be the lowest priced quote while meeting all the technical requirements of the Government but may be one that provides the Best overall Value in terms of satisfaction, longevity, durability, maneuverability, and applicability.   Vendors must have the capability to ship all items and be delivered 90 Days ARO to meet technical acceptability.

All firms or individuals responding must meet all standards required to conduct business with the Government, including registration with SAM and WAWF/iRAPT, and be in good standing. All qualified responses will be considered by the Government. In addition to providing pricing each quote must include vendor's CAGE/DUNS number, Federal Tax Number, and must include point of contact information.

Please provide your quote submission to the United States Property and Fiscal Office Purchasing and Contracting Division no later than 12:00 pm (Mountain) 27 July 2017. All submissions should be sent via email to: william.t.brown68.civ@mail.mil. Facsimiles will not be accepted. Questions regarding this requirement may also be directed to this email, with sufficient time to do any research to answer question prior to the closing of this posting. Responses received after the stated deadline will be considered non-responsive and will not be considered.

In accordance with FAR 52.212-1(k), prospective awardees shall be registered and active in the System for Award Management (SAM) prior to award and be in good standing. Offers may obtain information on registration at www.sam.gov . Failure to provide SAM registration may result in your quote being disqualified from consideration.

The following provisions and clauses are applicable to this solicitation:
FAR 52.202-1 - Definitions
FAR 52.203-3 - Gratuities
FAR 52.203-6 Alt 1 - restrictions on Subcontractor Sales to the Government
FAR 52.204-4 - Printed or Copied Double Sided or Post-consumer Fiber Content Paper
FAR 52.204-7 - Central Contractor Registration
FAR 52.204-10 - Reporting Executive Compensation and First-tier Subcontracting Awards
FAR 52.209-6 - Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarement
FAR 52.212-1 - Instructions to Offerors
FAR 52.212-3 Alt 1 - Offeror Representations and Certifications-Commercial Items
FAR 52.212-4 - Terms and Conditions - Commercial
FAR 52.212-5 - Dev - Statutes/Exec Orders
FAR 52.219-1 (Alt I) - Small Business Program Representation
FAR 52.219-6 - Notice of Total Small Business Set-Aside
FAR 52.219-8 - Utilization of Small Business Concerns
FAR 52.219-14 - Limitations on Subcontracting
FAR 52.219-28 - Post-award Small Business Program Representations
FAR 52.222-3 - Convict Labor
FAR 52.222-21 - Prohibit Segregated Facilities
FAR 52.222-22 - Previous Contract and Compliance Reports
FAR 52.222-25 - Affirmative Action
FAR 52.222-26 - Equal Opportunity
FAR 52.222-35 - Equal Opportunity for Veterans
FAR 52.222-36 - Affirmative Action for Workers With Disabilities
FAR 52.222-37 - Employment Reports on Special Disabled Veterans
FAR 52.222-40 - Notification of Employees Rights Under the National Labor Relations Act
FAR 52.222-41 - Service Contract Act of 1965
FAR 52.222-42 - Statement of Equivalent Rates for Federal Hires
FAR 52.222-43 - Fair Labor Standards Act and Service Contracts Act Price Adjustment (Multiple Year and Option Contracts)
FAR 52.222-50 - Combating trafficking in Persons
FAR 52.222-54 - Employment Eligibility Verification
FAR 52.223-18 - Encouraging Contractor Policy to Ban Text Messaging While Driving
FAR 52.225-23 - Restrictions on Certain Foreign Purchases
FAR 52.225-25 - Prohibition on Contracting with Entities in Certain Activities or Transactions Relating to Iran - Representation and Certifications
FAR 52.232-1 - Payments
FAR 52.232-33 - Payment by Electronic Funds Transfer-Central Contractor Registration
FAR 52.233-1 - Disputes
FAR 52.233-2 - Service of Protest
FAR 52.233-3 - Protest After Award
FAR 52.233-4 - Applicable Law for Breach of Contract Claim
FAR 52.243-1 (Alt 1) - Changes-Fixed Price
FAR 52.247-34 - FOB Destination
FAR 52.249-4 - Termination for Convenience of the Government (Services)(Short Form)
FAR 52.252-1 - Provisions Incorporated by Reference
FAR 52.252-2 - Clauses Incorporated by Reference
FAR 52.252-5 - Authorized Deviations in Provisions
FAR 52.252-6 - Authorized Deviation in Clauses
DFARS 252.203-7000 - Requirement Relating to Compensation of Former DoD Officials
DFARS 252.203-7002 - Requirements to Inform Employees of Whistleblower Rights
DFARS 252.204-7003 - Control of Government Personnel Work Product
DFARS 252.204-7004 Alt A - Required Central Contractor Registration
DFARS 252.209-7995 - Representation by Corporations Regarding Unpaid Delinquent Tax Liability of a Felony Conviction Under Any Federal Law
DFARS 252.212-7000 - Offeror Representations and Certification Required to Implement Status of Executive Orders Applicable to Defense Acquisition of Commercial Items
DFARS 252.212-7001 - Dev Terms and Conditions
DFARS 252.225-7001 - Buy America Act and Balance of Payments Program
DFARS 252.225-7002 - Qualifying Country as Subcontractors
DFARS 252.225-7012 - Preference for Certain Domestic Commodities
DFARS 252.232-7003 - Electronic Submission of Payment Requests
DFARS 252.232-7010 - Levies on Contract Payments
DFARS 252.237-7010 - Prohibition of Interrogation of Detainees by Contract Personnel
DFARS 252.243-7001 - Pricing of Contract Modifications
DFARS 252.243-7002 - Requests for Equitable Adjustment.
FAR 52.252-2 Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make full text available. Also, the full text of a clause may be accessed electronically at http://farsite.hill.af.mil/ .
IAW FAR 52.204-7 and DFARS 252.204-7004 Alt A, prospective vendors must be registered in the SAM database prior to award. Lack of SAM registration shall be a determining factor for award. Prospective vendors should visit the SAM website at http://www.sam.gov/start.aspx to register.

Primary Point of Contact.:
William (Billy) T. Brown
william.t.brown68.civ@mail.mil
Phone: 8014324273
Contracting Office Address:
12953 South Minuteman Drive
Draper, Utah 84020-2000
Place of Contract Performance:
12953 South Minuteman Drive
Draper, Utah 84020-2000
United States

Solicitation External Reference:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/listing.html
Solicitation External Reference To Packages:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/packages.html

Added: Jun 19, 2017 3:44 pm Modified: Jul 06, 2017 9:24 amTrack Changes SOLICITATION:
W5800P-7157-0150
AGENCY/OFFICE:
Utah National Guard/USPFO
DELIVERY AND INSTALLATION LOCATIONS:
Utah Army National Guard, 489th A Co, 525 W 1000 S Mount Pleasant, UT 84647
Utah Army National Guard, 489th A Co, C R 204A, Blanding, UT 84511
Utah Army National Guard, 624th EN CO, 584 N 500 E, Price, UT 84501
SUBJECT:
Relocatable Personal Duty Lockers and Caging
RESPONSE DUE DATE:
12:00 PM MST 10 July 2017
CONTRACTING POC:
William (Billy) T. Brown III Email: William.t.brown68.civ@mail.mil Phone: 8014324273

DESCRIPTION 
 
The Utah National Guard has a requirement that will be filled under combined synopsis/solicitation W5800P-7157-0150 and is being issued for Request for Quotations (RFQ).  This procurement is being solicited under NAICS code 337215, Showcase, Partition, Shelving, and Locker Manufacturing.  NAICS code 332999, All other Miscellaneous Fabricated Metal Product Manufacturing will also be accepted.  This award should be able to be filled by a single vendor.  This requirement calls for the purchase, delivery, and installation of Relocatable Personal Duty Lockers at 3 (three) different Utah National Guard locations (Mount Pleasant, Blanding, and Price).  Price location does not require installation charges. Additionally, Mount Pleasant location requires caging delivered and installed.  The winning vendor must be able to deliver & install all items listed below 90 Days ARO.

Minimal requirements for Unit OCIE lockers to meet technical acceptability:
a) Diamond perforated double wall doors welded together
b) Stainless steel lock plate with hasp, handle, and number plaque
c) Powder coat paint
d) Full length 16 gauge door hinges
e) Welded 18 gauge (minimum) frames-top, bottom, sides, and back. No main rivets on main structure
f) Interior side panel lances every 3 inches to allow addition of internal components
g) Lockers are required to match existing lockers for maneuverability and repositioning
h) Lockers and caging must be delivered and installed 90 Days ARO

Dimensions, quantities, and location:

1) Mount Pleasant location
     i. Locker numbers and dimensions
          A. 37 ea. 3 tier lockers, 30" x 30" x 84", total of 111 openings
          B. 7 ea. 2 tier lockers, 18" x 24" x 84", total of 14 openings
     ii. Caging numbers and dimensions
          A. 3 ea. 10' wide x 11' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide
              x 7' high sliding door with hasp locks per cage
          B. 2 ea. 12' wide x 8' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide x
              7' high sliding door with hasp locks per cage
     iii. Bids will include shipping and installation of lockers and caging
2) Blanding location
     i. Locker numbers and dimensions
          A. 17 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 51 openings
     ii. Bids will include shipping and installation of lockers.
3) Price location
      i. Locker numbers and dimensions
          A. 28 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 84 openings
     ii. Bids will include shipping of lockers (installation at this location not required)

Evaluations Factors: The contract type for this procurement will be firm-fixed price and award evaluation shall be made on the basis of Lowest Price Technically Acceptable (LPTA). An LPTA quote is one that is the lowest price while meeting all the technical requirements of the Government. A lowest quote may not be the successful quote if it does not meet technical requirements (i.e. the Government still reserves the option to award to other than lowest quote if the lowest quote does not meet technical acceptability). Vendors must have the capability to ship all items and be delivered 90 Days ARO to meet technical acceptability.

All firms or individuals responding must meet all standards required to conduct business with the Government, including registration with SAM and WAWF/iRAPT, and be in good standing. All qualified responses will be considered by the Government. In addition to providing pricing each quote must include vendor's CAGE/DUNS number, Federal Tax Number, and must include point of contact information.

Please provide your quote submission to the United States Property and Fiscal Office Purchasing and Contracting Division no later than 12:00 pm (Mountain) 10 July 2017. All submissions should be sent via email to: william.t.brown68.civ@mail.mil. Facsimiles will not be accepted. Questions regarding this requirement may also be directed to this email, with sufficient time to do any research to answer question prior to the closing of this posting. Responses received after the stated deadline will be considered non-responsive and will not be considered.

In accordance with FAR 52.212-1(k), prospective awardees shall be registered and active in the System for Award Management (SAM) prior to award and be in good standing. Offers may obtain information on registration at www.sam.gov . Failure to provide SAM registration may result in your quote being disqualified from consideration.

The following provisions and clauses are applicable to this solicitation:
FAR 52.202-1 - Definitions
FAR 52.203-3 - Gratuities
FAR 52.203-6 Alt 1 - restrictions on Subcontractor Sales to the Government
FAR 52.204-4 - Printed or Copied Double Sided or Post-consumer Fiber Content Paper
FAR 52.204-7 - Central Contractor Registration
FAR 52.204-10 - Reporting Executive Compensation and First-tier Subcontracting Awards
FAR 52.209-6 - Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarement
FAR 52.212-1 - Instructions to Offerors
FAR 52.212-3 Alt 1 - Offeror Representations and Certifications-Commercial Items
FAR 52.212-4 - Terms and Conditions - Commercial
FAR 52.212-5 - Dev - Statutes/Exec Orders
FAR 52.219-1 (Alt I) - Small Business Program Representation
FAR 52.219-6 - Notice of Total Small Business Set-Aside
FAR 52.219-8 - Utilization of Small Business Concerns
FAR 52.219-14 - Limitations on Subcontracting
FAR 52.219-28 - Post-award Small Business Program Representations
FAR 52.222-3 - Convict Labor
FAR 52.222-21 - Prohibit Segregated Facilities
FAR 52.222-22 - Previous Contract and Compliance Reports
FAR 52.222-25 - Affirmative Action
FAR 52.222-26 - Equal Opportunity
FAR 52.222-35 - Equal Opportunity for Veterans
FAR 52.222-36 - Affirmative Action for Workers With Disabilities
FAR 52.222-37 - Employment Reports on Special Disabled Veterans
FAR 52.222-40 - Notification of Employees Rights Under the National Labor Relations Act
FAR 52.222-41 - Service Contract Act of 1965
FAR 52.222-42 - Statement of Equivalent Rates for Federal Hires
FAR 52.222-43 - Fair Labor Standards Act and Service Contracts Act Price Adjustment (Multiple Year and Option Contracts)
FAR 52.222-50 - Combating trafficking in Persons
FAR 52.222-54 - Employment Eligibility Verification
FAR 52.223-18 - Encouraging Contractor Policy to Ban Text Messaging While Driving
FAR 52.225-23 - Restrictions on Certain Foreign Purchases
FAR 52.225-25 - Prohibition on Contracting with Entities in Certain Activities or Transactions Relating to Iran - Representation and Certifications
FAR 52.232-1 - Payments
FAR 52.232-33 - Payment by Electronic Funds Transfer-Central Contractor Registration
FAR 52.233-1 - Disputes
FAR 52.233-2 - Service of Protest
FAR 52.233-3 - Protest After Award
FAR 52.233-4 - Applicable Law for Breach of Contract Claim
FAR 52.243-1 (Alt 1) - Changes-Fixed Price
FAR 52.247-34 - FOB Destination
FAR 52.249-4 - Termination for Convenience of the Government (Services)(Short Form)
FAR 52.252-1 - Provisions Incorporated by Reference
FAR 52.252-2 - Clauses Incorporated by Reference
FAR 52.252-5 - Authorized Deviations in Provisions
FAR 52.252-6 - Authorized Deviation in Clauses
DFARS 252.203-7000 - Requirement Relating to Compensation of Former DoD Officials
DFARS 252.203-7002 - Requirements to Inform Employees of Whistleblower Rights
DFARS 252.204-7003 - Control of Government Personnel Work Product
DFARS 252.204-7004 Alt A - Required Central Contractor Registration
DFARS 252.209-7995 - Representation by Corporations Regarding Unpaid Delinquent Tax Liability of a Felony Conviction Under Any Federal Law
DFARS 252.212-7000 - Offeror Representations and Certification Required to Implement Status of Executive Orders Applicable to Defense Acquisition of Commercial Items
DFARS 252.212-7001 - Dev Terms and Conditions
DFARS 252.225-7001 - Buy America Act and Balance of Payments Program
DFARS 252.225-7002 - Qualifying Country as Subcontractors
DFARS 252.225-7012 - Preference for Certain Domestic Commodities
DFARS 252.232-7003 - Electronic Submission of Payment Requests
DFARS 252.232-7010 - Levies on Contract Payments
DFARS 252.237-7010 - Prohibition of Interrogation of Detainees by Contract Personnel
DFARS 252.243-7001 - Pricing of Contract Modifications
DFARS 252.243-7002 - Requests for Equitable Adjustment.
FAR 52.252-2 Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make full text available. Also, the full text of a clause may be accessed electronically at http://farsite.hill.af.mil/ .
IAW FAR 52.204-7 and DFARS 252.204-7004 Alt A, prospective vendors must be registered in the SAM database prior to award. Lack of SAM registration shall be a determining factor for award. Prospective vendors should visit the SAM website at http://www.sam.gov/start.aspx to register.

Primary Point of Contact.:
William (Billy) T. Brown
william.t.brown68.civ@mail.mil
Phone: 8014324273
Contracting Office Address:
12953 South Minuteman Drive
Draper, Utah 84020-2000
Place of Contract Performance:
12953 South Minuteman Drive
Draper, Utah 84020-2000
United States

Solicitation External Reference:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/listing.html
Solicitation External Reference To Packages:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/packages.html

Added: Jun 19, 2017 3:44 pm Modified: Jun 29, 2017 6:54 pmTrack Changes SOLICITATION:
W5800P-7157-0150
AGENCY/OFFICE:
Utah National Guard/USPFO
DELIVERY AND INSTALLATION LOCATIONS:
Utah Army National Guard, 489th A Co, 525 W 1000 S Mount Pleasant, UT 84647
Utah Army National Guard, 489th A Co, C R 204A, Blanding, UT 84511
Utah Army National Guard, 624th EN CO, 584 N 500 E, Price, UT 84501
SUBJECT:
Relocatable Personal Duty Lockers and Caging
RESPONSE DUE DATE:
12:00 PM MST 10 July 2017
CONTRACTING POC:
William (Billy) T. Brown III Email: William.t.brown68.civ@mail.mil Phone: 8014324273

DESCRIPTION 
 
The Utah National Guard has a requirement that will be filled under combined synopsis/solicitation W5800P-7157-0150 and is being issued for Request for Quotations (RFQ).  This procurement is being solicited under NAICS code 337215, Showcase, Partition, Shelving, and Locker Manufacturing.  This award should be able to be filled by a single vendor.  This requirement calls for the purchase, delivery, and installation of Relocatable Personal Duty Lockers at 3 (three) different Utah National Guard locations (Mount Pleasant, Blanding, and Price).  Price location does not require installation charges. Additionally, Mount Pleasant location requires caging delivered and installed.  The winning vendor must be able to deliver & install all items listed below 90 Days ARO.

Minimal requirements for Unit OCIE lockers to meet technical acceptability:
a) Diamond perforated double wall doors welded together
b) Stainless steel lock plate with hasp, handle, and number plaque
c) Powder coat paint
d) Full length 16 gauge door hinges
e) Welded 18 gauge (minimum) frames-top, bottom, sides, and back. No main rivets on main structure
f) Interior side panel lances every 3 inches to allow addition of internal components
g) Lockers are required to match existing lockers for maneuverability and repositioning
h) Lockers and caging must be delivered and installed 90 Days ARO

Dimensions, quantities, and location:

1) Mount Pleasant location
     i. Locker numbers and dimensions
          A. 37 ea. 3 tier lockers, 30" x 30" x 84", total of 111 openings
          B. 7 ea. 2 tier lockers, 18" x 24" x 84", total of 14 openings
     ii. Caging numbers and dimensions
          A. 3 ea. 10' wide x 11' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide
              x 7' high sliding door with hasp locks per cage
          B. 2 ea. 12' wide x 8' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide x
              7' high sliding door with hasp locks per cage
     iii. Bids will include shipping and installation of lockers and caging
2) Blanding location
     i. Locker numbers and dimensions
          A. 17 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 51 openings
     ii. Bids will include shipping and installation of lockers.
3) Price location
      i. Locker numbers and dimensions
          A. 28 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 84 openings
     ii. Bids will include shipping of lockers (installation at this location not required)

Evaluations Factors: The contract type for this procurement will be firm-fixed price and award evaluation shall be made on the basis of Lowest Price Technically Acceptable (LPTA). An LPTA quote is one that is the lowest price while meeting all the technical requirements of the Government. A lowest quote may not be the successful quote if it does not meet technical requirements (i.e. the Government still reserves the option to award to other than lowest quote if the lowest quote does not meet technical acceptability). Vendors must have the capability to ship all items and be delivered 90 Days ARO to meet technical acceptability.

All firms or individuals responding must meet all standards required to conduct business with the Government, including registration with SAM and WAWF/iRAPT, and be in good standing. All qualified responses will be considered by the Government. In addition to providing pricing each quote must include vendor's CAGE/DUNS number, Federal Tax Number, and must include point of contact information.

Please provide your quote submission to the United States Property and Fiscal Office Purchasing and Contracting Division no later than 12:00 pm (Mountain) 10 July 2017. All submissions should be sent via email to: william.t.brown68.civ@mail.mil. Facsimiles will not be accepted. Questions regarding this requirement may also be directed to this email, with sufficient time to do any research to answer question prior to the closing of this posting. Responses received after the stated deadline will be considered non-responsive and will not be considered.

In accordance with FAR 52.212-1(k), prospective awardees shall be registered and active in the System for Award Management (SAM) prior to award and be in good standing. Offers may obtain information on registration at www.sam.gov . Failure to provide SAM registration may result in your quote being disqualified from consideration.

The following provisions and clauses are applicable to this solicitation:
FAR 52.202-1 - Definitions
FAR 52.203-3 - Gratuities
FAR 52.203-6 Alt 1 - restrictions on Subcontractor Sales to the Government
FAR 52.204-4 - Printed or Copied Double Sided or Post-consumer Fiber Content Paper
FAR 52.204-7 - Central Contractor Registration
FAR 52.204-10 - Reporting Executive Compensation and First-tier Subcontracting Awards
FAR 52.209-6 - Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarement
FAR 52.212-1 - Instructions to Offerors
FAR 52.212-3 Alt 1 - Offeror Representations and Certifications-Commercial Items
FAR 52.212-4 - Terms and Conditions - Commercial
FAR 52.212-5 - Dev - Statutes/Exec Orders
FAR 52.219-1 (Alt I) - Small Business Program Representation
FAR 52.219-6 - Notice of Total Small Business Set-Aside
FAR 52.219-8 - Utilization of Small Business Concerns
FAR 52.219-14 - Limitations on Subcontracting
FAR 52.219-28 - Post-award Small Business Program Representations
FAR 52.222-3 - Convict Labor
FAR 52.222-21 - Prohibit Segregated Facilities
FAR 52.222-22 - Previous Contract and Compliance Reports
FAR 52.222-25 - Affirmative Action
FAR 52.222-26 - Equal Opportunity
FAR 52.222-35 - Equal Opportunity for Veterans
FAR 52.222-36 - Affirmative Action for Workers With Disabilities
FAR 52.222-37 - Employment Reports on Special Disabled Veterans
FAR 52.222-40 - Notification of Employees Rights Under the National Labor Relations Act
FAR 52.222-41 - Service Contract Act of 1965
FAR 52.222-42 - Statement of Equivalent Rates for Federal Hires
FAR 52.222-43 - Fair Labor Standards Act and Service Contracts Act Price Adjustment (Multiple Year and Option Contracts)
FAR 52.222-50 - Combating trafficking in Persons
FAR 52.222-54 - Employment Eligibility Verification
FAR 52.223-18 - Encouraging Contractor Policy to Ban Text Messaging While Driving
FAR 52.225-23 - Restrictions on Certain Foreign Purchases
FAR 52.225-25 - Prohibition on Contracting with Entities in Certain Activities or Transactions Relating to Iran - Representation and Certifications
FAR 52.232-1 - Payments
FAR 52.232-33 - Payment by Electronic Funds Transfer-Central Contractor Registration
FAR 52.233-1 - Disputes
FAR 52.233-2 - Service of Protest
FAR 52.233-3 - Protest After Award
FAR 52.233-4 - Applicable Law for Breach of Contract Claim
FAR 52.243-1 (Alt 1) - Changes-Fixed Price
FAR 52.247-34 - FOB Destination
FAR 52.249-4 - Termination for Convenience of the Government (Services)(Short Form)
FAR 52.252-1 - Provisions Incorporated by Reference
FAR 52.252-2 - Clauses Incorporated by Reference
FAR 52.252-5 - Authorized Deviations in Provisions
FAR 52.252-6 - Authorized Deviation in Clauses
DFARS 252.203-7000 - Requirement Relating to Compensation of Former DoD Officials
DFARS 252.203-7002 - Requirements to Inform Employees of Whistleblower Rights
DFARS 252.204-7003 - Control of Government Personnel Work Product
DFARS 252.204-7004 Alt A - Required Central Contractor Registration
DFARS 252.209-7995 - Representation by Corporations Regarding Unpaid Delinquent Tax Liability of a Felony Conviction Under Any Federal Law
DFARS 252.212-7000 - Offeror Representations and Certification Required to Implement Status of Executive Orders Applicable to Defense Acquisition of Commercial Items
DFARS 252.212-7001 - Dev Terms and Conditions
DFARS 252.225-7001 - Buy America Act and Balance of Payments Program
DFARS 252.225-7002 - Qualifying Country as Subcontractors
DFARS 252.225-7012 - Preference for Certain Domestic Commodities
DFARS 252.232-7003 - Electronic Submission of Payment Requests
DFARS 252.232-7010 - Levies on Contract Payments
DFARS 252.237-7010 - Prohibition of Interrogation of Detainees by Contract Personnel
DFARS 252.243-7001 - Pricing of Contract Modifications
DFARS 252.243-7002 - Requests for Equitable Adjustment.
FAR 52.252-2 Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make full text available. Also, the full text of a clause may be accessed electronically at http://farsite.hill.af.mil/ .
IAW FAR 52.204-7 and DFARS 252.204-7004 Alt A, prospective vendors must be registered in the SAM database prior to award. Lack of SAM registration shall be a determining factor for award. Prospective vendors should visit the SAM website at http://www.sam.gov/start.aspx to register.

Primary Point of Contact.:
William (Billy) T. Brown
william.t.brown68.civ@mail.mil
Phone: 8014324273
Contracting Office Address:
12953 South Minuteman Drive
Draper, Utah 84020-2000
Place of Contract Performance:
12953 South Minuteman Drive
Draper, Utah 84020-2000
United States

Solicitation External Reference:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/listing.html
Solicitation External Reference To Packages:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/packages.html

Added: Jun 19, 2017 3:44 pm Modified: Jun 20, 2017 5:07 pmTrack Changes SOLICITATION:
W5800P-7157-0150
AGENCY/OFFICE:
Utah National Guard/USPFO
DELIVERY AND INSTALLATION LOCATIONS:
Utah Army National Guard, 489th A Co, 525 W 1000 S Mount Pleasant, UT 84647
Utah Army National Guard, 489th A Co, C R 204A, Blanding, UT 84511
Utah Army National Guard, 624th EN CO, 584 N 500 E, Price, UT 84501
SUBJECT:
Relocatable Personal Duty Lockers and Caging
RESPONSE DUE DATE:
12:00 PM MST 3 July 2017
CONTRACTING POC:
William (Billy) T. Brown III Email: William.t.brown68.civ@mail.mil Phone: 8014324273

DESCRIPTION 
 
The Utah National Guard has a requirement that will be filled under combined synopsis/solicitation W5800P-7157-0150 and is being issued for Request for Quotations (RFQ).  This procurement is being solicited under NAICS code 337215, Showcase, Partition, Shelving, and Locker Manufacturing.  This award should be able to be filled by a single vendor.  This requirement calls for the purchase, delivery, and installation of Relocatable Personal Duty Lockers at 3 (three) different Utah National Guard locations (Mount Pleasant, Blanding, and Price).  Price location does not require installation charges. Additionally, Mount Pleasant location requires caging delivered and installed.  The winning vendor must be able to deliver & install all items listed below 90 Days ARO.

Minimal requirements for Unit OCIE lockers to meet technical acceptability:
a) Diamond perforated double wall doors welded together
b) Stainless steel lock plate with hasp, handle, and number plaque
c) Powder coat paint
d) Full length 16 gauge door hinges
e) Welded 18 gauge (minimum) frames-top, bottom, sides, and back. No main rivets on main structure
f) Interior side panel lances every 3 inches to allow addition of internal components
g) Lockers are required to match existing lockers for maneuverability and repositioning
h) Lockers and caging must be delivered and installed 90 Days ARO

Dimensions, quantities, and location:

1) Mount Pleasant location
     i. Locker numbers and dimensions
          A. 37 ea. 3 tier lockers, 30" x 30" x 84", total of 111 openings
          B. 7 ea. 2 tier lockers, 18" x 24" x 84", total of 14 openings
     ii. Caging numbers and dimensions
          A. 3 ea. 10' wide x 11' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide
              x 7' high sliding door with hasp locks per cage
          B. 2 ea. 12' wide x 8' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide x
              7' high sliding door with hasp locks per cage
     iii. Bids will include shipping and installation of lockers and caging
2) Blanding location
     i. Locker numbers and dimensions
          A. 17 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 51 openings
     ii. Bids will include shipping and installation of lockers.
3) Price location
      i. Locker numbers and dimensions
          A. 28 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 84 openings
     ii. Bids will include shipping of lockers (installation at this location not required)

Evaluations Factors: The contract type for this procurement will be firm-fixed price and award evaluation shall be made on the basis of Lowest Price Technically Acceptable (LPTA). An LPTA quote is one that is the lowest price while meeting all the technical requirements of the Government. A lowest quote may not be the successful quote if it does not meet technical requirements (i.e. the Government still reserves the option to award to other than lowest quote if the lowest quote does not meet technical acceptability). Vendors must have the capability to ship all items and be delivered 90 Days ARO to meet technical acceptability.

All firms or individuals responding must meet all standards required to conduct business with the Government, including registration with SAM and WAWF/iRAPT, and be in good standing. All qualified responses will be considered by the Government. In addition to providing pricing each quote must include vendor's CAGE/DUNS number, Federal Tax Number, and must include point of contact information.

Please provide your quote submission to the United States Property and Fiscal Office Purchasing and Contracting Division no later than 12:00 pm (Mountain) 3 July 2017. All submissions should be sent via email to: william.t.brown68.civ@mail.mil. Facsimiles will not be accepted. Questions regarding this requirement may also be directed to this email, with sufficient time to do any research to answer question prior to the closing of this posting. Responses received after the stated deadline will be considered non-responsive and will not be considered.

In accordance with FAR 52.212-1(k), prospective awardees shall be registered and active in the System for Award Management (SAM) prior to award and be in good standing. Offers may obtain information on registration at www.sam.gov . Failure to provide SAM registration may result in your quote being disqualified from consideration.

The following provisions and clauses are applicable to this solicitation:
FAR 52.202-1 - Definitions
FAR 52.203-3 - Gratuities
FAR 52.203-6 Alt 1 - restrictions on Subcontractor Sales to the Government
FAR 52.204-4 - Printed or Copied Double Sided or Post-consumer Fiber Content Paper
FAR 52.204-7 - Central Contractor Registration
FAR 52.204-10 - Reporting Executive Compensation and First-tier Subcontracting Awards
FAR 52.209-6 - Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarement
FAR 52.212-1 - Instructions to Offerors
FAR 52.212-3 Alt 1 - Offeror Representations and Certifications-Commercial Items
FAR 52.212-4 - Terms and Conditions - Commercial
FAR 52.212-5 - Dev - Statutes/Exec Orders
FAR 52.219-1 (Alt I) - Small Business Program Representation
FAR 52.219-6 - Notice of Total Small Business Set-Aside
FAR 52.219-8 - Utilization of Small Business Concerns
FAR 52.219-14 - Limitations on Subcontracting
FAR 52.219-28 - Post-award Small Business Program Representations
FAR 52.222-3 - Convict Labor
FAR 52.222-21 - Prohibit Segregated Facilities
FAR 52.222-22 - Previous Contract and Compliance Reports
FAR 52.222-25 - Affirmative Action
FAR 52.222-26 - Equal Opportunity
FAR 52.222-35 - Equal Opportunity for Veterans
FAR 52.222-36 - Affirmative Action for Workers With Disabilities
FAR 52.222-37 - Employment Reports on Special Disabled Veterans
FAR 52.222-40 - Notification of Employees Rights Under the National Labor Relations Act
FAR 52.222-41 - Service Contract Act of 1965
FAR 52.222-42 - Statement of Equivalent Rates for Federal Hires
FAR 52.222-43 - Fair Labor Standards Act and Service Contracts Act Price Adjustment (Multiple Year and Option Contracts)
FAR 52.222-50 - Combating trafficking in Persons
FAR 52.222-54 - Employment Eligibility Verification
FAR 52.223-18 - Encouraging Contractor Policy to Ban Text Messaging While Driving
FAR 52.225-23 - Restrictions on Certain Foreign Purchases
FAR 52.225-25 - Prohibition on Contracting with Entities in Certain Activities or Transactions Relating to Iran - Representation and Certifications
FAR 52.232-1 - Payments
FAR 52.232-33 - Payment by Electronic Funds Transfer-Central Contractor Registration
FAR 52.233-1 - Disputes
FAR 52.233-2 - Service of Protest
FAR 52.233-3 - Protest After Award
FAR 52.233-4 - Applicable Law for Breach of Contract Claim
FAR 52.243-1 (Alt 1) - Changes-Fixed Price
FAR 52.247-34 - FOB Destination
FAR 52.249-4 - Termination for Convenience of the Government (Services)(Short Form)
FAR 52.252-1 - Provisions Incorporated by Reference
FAR 52.252-2 - Clauses Incorporated by Reference
FAR 52.252-5 - Authorized Deviations in Provisions
FAR 52.252-6 - Authorized Deviation in Clauses
DFARS 252.203-7000 - Requirement Relating to Compensation of Former DoD Officials
DFARS 252.203-7002 - Requirements to Inform Employees of Whistleblower Rights
DFARS 252.204-7003 - Control of Government Personnel Work Product
DFARS 252.204-7004 Alt A - Required Central Contractor Registration
DFARS 252.209-7995 - Representation by Corporations Regarding Unpaid Delinquent Tax Liability of a Felony Conviction Under Any Federal Law
DFARS 252.212-7000 - Offeror Representations and Certification Required to Implement Status of Executive Orders Applicable to Defense Acquisition of Commercial Items
DFARS 252.212-7001 - Dev Terms and Conditions
DFARS 252.225-7001 - Buy America Act and Balance of Payments Program
DFARS 252.225-7002 - Qualifying Country as Subcontractors
DFARS 252.225-7012 - Preference for Certain Domestic Commodities
DFARS 252.232-7003 - Electronic Submission of Payment Requests
DFARS 252.232-7010 - Levies on Contract Payments
DFARS 252.237-7010 - Prohibition of Interrogation of Detainees by Contract Personnel
DFARS 252.243-7001 - Pricing of Contract Modifications
DFARS 252.243-7002 - Requests for Equitable Adjustment.
FAR 52.252-2 Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make full text available. Also, the full text of a clause may be accessed electronically at http://farsite.hill.af.mil/ .
IAW FAR 52.204-7 and DFARS 252.204-7004 Alt A, prospective vendors must be registered in the SAM database prior to award. Lack of SAM registration shall be a determining factor for award. Prospective vendors should visit the SAM website at http://www.sam.gov/start.aspx to register.

Primary Point of Contact.:
William (Billy) T. Brown
william.t.brown68.civ@mail.mil
Phone: 8014324273
Contracting Office Address:
12953 South Minuteman Drive
Draper, Utah 84020-2000
Place of Contract Performance:
12953 South Minuteman Drive
Draper, Utah 84020-2000
United States

Solicitation External Reference:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/listing.html
Solicitation External Reference To Packages:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/packages.html

Added: Jun 19, 2017 3:44 pm SOLICITATION:
W5800P-7157-0150
AGENCY/OFFICE:
Utah National Guard/USPFO
DELIVERY AND INSTALLATION LOCATIONS:
Utah Army National Guard, 489th A Co, 525 W 1000 S Mount Pleasant, UT 84647
Utah Army National Guard, 489th A Co, C R 204A, Blanding, UT 84511
Utah Army National Guard, 624th EN CO, 584 N 500 E, Price, UT 84501
SUBJECT:
Relocatable Personal Duty Lockers and Caging
RESPONSE DUE DATE:
12:00 PM MST 3 July 2017
CONTRACTING POC:
William (Billy) T. Brown III Email: William.t.brown68.civ@mail.mil Phone: 8014324273

DESCRIPTION
***THIS REQUIREMENT IS BEING SOLICITED AS A TOTAL SMALL BUSINESS SET-ASIDE. ONLY QUOTES FROM SMALL BUSINESSES WILL BE ACCEPTED***

Combined synopsis/solicitation W5800P-7157-0150 is being issued for Request for Quotation. Northern America Industry Classification System Code (NAICS) is 337215, Showcase, Partition, Shelving, and Locker Manufacturing. The Utah National Guard has a requirement that will be filled under this combined synopsis/solicitation. This award should be able to be filled by a single vendor. This requirement calls for the purchase, delivery, and installation of Relocatable Personal Duty Lockers at 3 (three) different Utah National Guard locations (Mount Pleasant, Blanding, and Price). Price location does not require installation charges. Additionally, Mount Pleasant location requires caging delivered and installed. The winning vendor must be able to deliver & install all items listed below 90 Days ARO.

Minimal requirements for Unit OCIE lockers to meet technical acceptability:
a) Diamond perforated double wall doors welded together
b) Stainless steel lock plate with hasp, handle, and number plaque
c) Powder coat paint
d) Full length 16 gauge door hinges
e) Welded 18 gauge (minimum) frames-top, bottom, sides, and back. No main rivets on main structure
f) Interior side panel lances every 3 inches to allow addition of internal components
g) Lockers are required to match existing lockers for maneuverability and repositioning
h) Lockers and caging must be delivered and installed 90 Days ARO

Dimensions, quantities, and location:

1) Mount Pleasant location
     i. Locker numbers and dimensions
          A. 37 ea. 3 tier lockers, 30" x 30" x 84", total of 111 openings
          B. 7 ea. 2 tier lockers, 18" x 24" x 84", total of 14 openings
     ii. Caging numbers and dimensions
          A. 3 ea. 10' wide x 11' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide
              x 7' high sliding door with hasp locks per cage
          B. 2 ea. 12' wide x 8' deep, 10 gauge Beastwire, 116" high-with tops, 4' wide x
              7' high sliding door with hasp locks per cage
     iii. Bids will include shipping and installation of lockers and caging
2) Blanding location
     i. Locker numbers and dimensions
          A. 17 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 51 openings
     ii. Bids will include shipping and installation of lockers.
3) Price location
      i. Locker numbers and dimensions
          A. 28 ea. 3 tier lockers, 30" x 30" x 84" with 4" base
          B. Single mesh door with hasp, total of 84 openings
     ii. Bids will include shipping of lockers (installation at this location not required)

Evaluations Factors: The contract type for this procurement will be firm-fixed price and award evaluation shall be made on the basis of Lowest Price Technically Acceptable (LPTA). An LPTA quote is one that is the lowest price while meeting all the technical requirements of the Government. A lowest quote may not be the successful quote if it does not meet technical requirements (i.e. the Government still reserves the option to award to other than lowest quote if the lowest quote does not meet technical acceptability). Vendors must have the capability to ship all items and be delivered 90 Days ARO to meet technical acceptability.

All firms or individuals responding must meet all standards required to conduct business with the Government, including registration with SAM and WAWF/iRAPT, and be in good standing. All qualified responses will be considered by the Government. In addition to providing pricing each quote must include vendor's CAGE/DUNS number, Federal Tax Number, and must include point of contact information.
Please provide your quote submission to the United States Property and Fiscal Office Purchasing and Contracting Division no later than 12:00 pm (Mountain) 3 July 2017. All submissions should be sent via email to: william.t.brown68.civ@mail.mil. Facsimiles will not be accepted. Questions regarding this requirement may also be directed to this email, with sufficient time to do any research to answer question prior to the closing of this posting. Responses received after the stated deadline will be considered non-responsive and will not be considered.

In accordance with FAR 52.212-1(k), prospective awardees shall be registered and active in the System for Award Management (SAM) prior to award and be in good standing. Offers may obtain information on registration at www.sam.gov . Failure to provide SAM registration may result in your quote being disqualified from consideration.

The following provisions and clauses are applicable to this solicitation:
FAR 52.202-1 - Definitions
FAR 52.203-3 - Gratuities
FAR 52.203-6 Alt 1 - restrictions on Subcontractor Sales to the Government
FAR 52.204-4 - Printed or Copied Double Sided or Post-consumer Fiber Content Paper
FAR 52.204-7 - Central Contractor Registration
FAR 52.204-10 - Reporting Executive Compensation and First-tier Subcontracting Awards
FAR 52.209-6 - Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarement
FAR 52.212-1 - Instructions to Offerors
FAR 52.212-3 Alt 1 - Offeror Representations and Certifications-Commercial Items
FAR 52.212-4 - Terms and Conditions - Commercial
FAR 52.212-5 - Dev - Statutes/Exec Orders
FAR 52.219-1 (Alt I) - Small Business Program Representation
FAR 52.219-6 - Notice of Total Small Business Set-Aside
FAR 52.219-8 - Utilization of Small Business Concerns
FAR 52.219-14 - Limitations on Subcontracting
FAR 52.219-28 - Post-award Small Business Program Representations
FAR 52.222-3 - Convict Labor
FAR 52.222-21 - Prohibit Segregated Facilities
FAR 52.222-22 - Previous Contract and Compliance Reports
FAR 52.222-25 - Affirmative Action
FAR 52.222-26 - Equal Opportunity
FAR 52.222-35 - Equal Opportunity for Veterans
FAR 52.222-36 - Affirmative Action for Workers With Disabilities
FAR 52.222-37 - Employment Reports on Special Disabled Veterans
FAR 52.222-40 - Notification of Employees Rights Under the National Labor Relations Act
FAR 52.222-41 - Service Contract Act of 1965
FAR 52.222-42 - Statement of Equivalent Rates for Federal Hires
FAR 52.222-43 - Fair Labor Standards Act and Service Contracts Act Price Adjustment (Multiple Year and Option Contracts)
FAR 52.222-50 - Combating trafficking in Persons
FAR 52.222-54 - Employment Eligibility Verification
FAR 52.223-18 - Encouraging Contractor Policy to Ban Text Messaging While Driving
FAR 52.225-23 - Restrictions on Certain Foreign Purchases
FAR 52.225-25 - Prohibition on Contracting with Entities in Certain Activities or Transactions Relating to Iran - Representation and Certifications
FAR 52.232-1 - Payments
FAR 52.232-33 - Payment by Electronic Funds Transfer-Central Contractor Registration
FAR 52.233-1 - Disputes
FAR 52.233-2 - Service of Protest
FAR 52.233-3 - Protest After Award
FAR 52.233-4 - Applicable Law for Breach of Contract Claim
FAR 52.243-1 (Alt 1) - Changes-Fixed Price
FAR 52.247-34 - FOB Destination
FAR 52.249-4 - Termination for Convenience of the Government (Services)(Short Form)
FAR 52.252-1 - Provisions Incorporated by Reference
FAR 52.252-2 - Clauses Incorporated by Reference
FAR 52.252-5 - Authorized Deviations in Provisions
FAR 52.252-6 - Authorized Deviation in Clauses
DFARS 252.203-7000 - Requirement Relating to Compensation of Former DoD Officials
DFARS 252.203-7002 - Requirements to Inform Employees of Whistleblower Rights
DFARS 252.204-7003 - Control of Government Personnel Work Product
DFARS 252.204-7004 Alt A - Required Central Contractor Registration
DFARS 252.209-7995 - Representation by Corporations Regarding Unpaid Delinquent Tax Liability of a Felony Conviction Under Any Federal Law
DFARS 252.212-7000 - Offeror Representations and Certification Required to Implement Status of Executive Orders Applicable to Defense Acquisition of Commercial Items
DFARS 252.212-7001 - Dev Terms and Conditions
DFARS 252.225-7001 - Buy America Act and Balance of Payments Program
DFARS 252.225-7002 - Qualifying Country as Subcontractors
DFARS 252.225-7012 - Preference for Certain Domestic Commodities
DFARS 252.232-7003 - Electronic Submission of Payment Requests
DFARS 252.232-7010 - Levies on Contract Payments
DFARS 252.237-7010 - Prohibition of Interrogation of Detainees by Contract Personnel
DFARS 252.243-7001 - Pricing of Contract Modifications
DFARS 252.243-7002 - Requests for Equitable Adjustment.
FAR 52.252-2 Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make full text available. Also, the full text of a clause may be accessed electronically at http://farsite.hill.af.mil/ .
IAW FAR 52.204-7 and DFARS 252.204-7004 Alt A, prospective vendors must be registered in the SAM database prior to award. Lack of SAM registration shall be a determining factor for award. Prospective vendors should visit the SAM website at http://www.sam.gov/start.aspx to register.

Primary Point of Contact.:
William (Billy) T. Brown
william.t.brown68.civ@mail.mil
Phone: 8014324273
Contracting Office Address:
12953 South Minuteman Drive
Draper, Utah 84020-2000
Place of Contract Performance:
12953 South Minuteman Drive
Draper, Utah 84020-2000
United States

Solicitation External Reference:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/listing.html
Solicitation External Reference To Packages:
https://www.fbo.gov/spg/USA/NGB/DAHA42/W90ZVZCDFurnitureFY16/packages.html