Regulator, Voltage

*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:013797187

      REGULATOR,VOLTAGE
     REFERENCE NUMBER:RP001
     REFERENCE NUMBER:A1202
     REFERENCE NUMBER:RA001
     REFERENCE NUMBER:RQ002
     REFERENCE NUMBER:RQ011
     REFERENCE NUMBER:CS241
     REFERENCE NUMBER:CS199

     CRITICAL APPLICATION ITEM

     CREATING TECHNOLOGY SOLUTIONS, LLC 60177 P/N 19890-001

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

************************************************************************************************************

                                                    GLOSSARY

************************************************************************************************************
PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
     All DLA Master List of Technical and Quality Requirements take
      precedence over ASTM D3951.
     Mark and label all packaging and packing in accordance with MIL-STD-129.
     The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
      as specified in the contract/purchase order.
     PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
      REQUIREMENTS FOR PROCUREMENT
ITEM DESCRIPTION TEXT

     REFERENCE NUMBER RP001

     RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER A1202

     Casting/forging may be required to manufacture this NSN.  If a
     casting/forging is required, tooling is typically involved. The
     government may not have this special tooling. For sourcing, tooling,
     materials or other information, please contact the appropriate
     assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land
     & Maritime Supply Chains) DSCC.cast.forge@dla.mil

     REFERENCE NUMBER RA001

     RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

     REFERENCE NUMBER RQ002

     RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

     REFERENCE NUMBER RQ011

     RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

     REFERENCE NUMBER CS241

     NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
     REQUIRES ENGINEERING SOURCE APPROVAL BY THE
     GOVERNMENT DESIGN CONTROL ACTIVITY.

     REFERENCE NUMBER CS199

     ALTERNATE OFFEROR REQUIREMENTS:
     THE FOLLOWING DOCUMENTATION IS REQUIRED IN
     ACCORDANCE WITH MIL-T-31000.  (A) ALL DRAWINGS
     AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.
     (B) PROCESS/OPERATION SHEETS WHICH DESCRIBE
     IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED
     INSPECTION/ACCEPTANCE CRITERIA.  (C)
     IDENTIFICATION OF SOURCES WHO WILL PERFORM
     CRITICAL PROCESSES/OPERATIONS, INCLUDING
     SOURCES OF FORGINGS AND CASTINGS.  (D) IF
     AVAILABLE COPIES OF PURCHASE ORDERS FROM THE
     ITEM.  (E) A SHOCK EXTENSION REPORT IN
     ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS
     SPECIFIED IN DI-ENVR-80706 IS REQUIRED.
     IF THE OEM'S DETAILED DRAWINGS ARE NOT
     AVAILABLE, THE OFFEROR MUST SUPPLY AN
     ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW
     THEIR DRAWINGS WERE DEVELOPED.  ADDITIONALLY,
     IF REVERSE ENGINEERING WAS USED, THE COMPLETE
     PROCEDURE WILL BE REPORTED INCLUDING: NUMBER
     OF SAMPLES, METHODS AND MEASURES USED, ALL DATA
     COMPILED, RATIONALE FOR DIMENSION TOLERANCE
     DEVIATION, AND RATIONALE FOR ACCEPTANCE.  THIS
     DATA WILL BE FORWARDED TO THE ENGINEERING
     SUPPORT ACTIVITY FOR EVALUATION.