Portable Laser Marker
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from , or the latest solicitation from .
- Solicitation number
- FA8125-23-Q-0091
- Agency
- Air Force Sustainment Center Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333914 Measuring, Dispensing, and Other Pumping Equipment Manufacturing
- PSC
- 3611 Industrial Marking Machines
- Place of performance
- Tinker AFB, Oklahoma 73145, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Air Force is seeking to purchase one Portable Laser Maker, which includes installation and training at Tinker Air Force Base, OK, and a maintenance kit with at least ten replacement consumables. The equipment must meet specific standards and specifications, including direct marking SAE specifications, wire processing/handling/printer capabilities, power requirements, site constraints, and control features. The estimated period of performance is 30 days after receipt of order (ARO), and the contract is set aside for small businesses.
Products and Services to be provided:
- One Portable Laser Maker
- Five days of Installation and Training at Tinker Air Force Base, OK
- Maintenance kit with at least ten replacement consumables
- Compliance with specific standards and specifications
- User control screen built into device with touchscreen interface.
Notice text
The Air Force intends to solicit the following supply:
The 76th AMXG/564 is requesting utilization of funds for the purchase of one (1) Portable Laser
Maker.
The requested equipment item description / Specifications are outlined below.
Quantity of One (1) Portable Laser Maker.
Startup:
(1) Five (5) days of Installation and Training at Tinker Air Force Base, OK.
(2) Maintenance kit and instructions shall have a minimum of ten (10) replacement consumables such as belts and filters.
Standards:
(1) Shall comply with direct marking SAE specifications AS5942 or AS5649
(2) Shall comply with BAC 5152
Wire Processing / Handling / Printer
(1) Powered coiling pan.
(2) Knot and splice detection.
(3) Wire size and cut capability – 26 AWG to 6 AWG
(4) Measure and cut capability.
(5) Shall have a minimum speed of 25 meters per minute.
(6) Shall have upper- and lower-case text marking capability on wires.
(7) Table-top unpowered de-reeler.
(8) Wire tension monitoring to ensure wires are not over tensioned when being marked.
Power Requirements
(1) Electrically powered by standard 120VAC 20A.
(2) Device shall not require compressed air to operate.
Site Constraints:
(1) Plug Configuration shall be NEMA 5-15P.
(2) Dimensions: De-reeler and wire marker shall fit within a 65”(L) x 30” (W) x 40” (H)
Space.
Control:
(1) User control screen built into device.
(2) User control interface must be touchscreen.
A Firm Fixed Price type contract is contemplated.
Estimated Period of Performance: 30 days ARO
This is a small business set-aside
System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 333914with a size standard of 750 EMP.
Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).
For further information contact:
Sheridan Robison
Contracting Officer
Notice history
| Notice | Type | Posted |
|---|---|---|
| Portable Laser Marker | Award Notice | |
| Portable Laser Marker | Solicitation | |
| Portable Laser Marker | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity