MK79 pallet galvanizing
Closed Solicitation Posted
- Solicitation number
- W519TC24Q2029
- Agency
- Joint Munitions Command Army Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332812 Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
- PSC
- 3426 Metal Finishing Equipment
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Joint Munitions Command seeks bids to hot dip galvanize 464 sets of MK79 metal bomb pallets to ASTM A123/A123M standards by November 1, 2023. Pallets will be delivered to the vendor in weekly loads of 140 units and picked up after galvanizing. Bids are due by October 17, 2023 and must meet all requirements of Solicitation W519TC24Q2029. The award will be made on a best value tradeoff basis among technically acceptable offers.
This requirement has been set aside for total small business. The NAICS code for hot dip galvanizing services is 332813 and PSC code is J019. Pallets must be galvanized within 200 miles of McAlester, Oklahoma and the vendor must be able to load and unload trailers. Each shipment must include a certificate of conformance. The total estimated value is $464,000 based on galvanizing 464 sets of pallets consisting of top and bottom frames measuring approximately 70 by 38 inches in size. Place of performance will be at the awardee's facility.
Notice text
URGENT REQUIREMENT
MK-79-1 Metal Pallet Hot Dip Galvanizing, FFP
Pallet Top Frame – Approx. 70” x 38” x 3.25”
Pallet Bottom Frame – Approx. 70” x 38” x 6.75”
Each Pallet Set consists of one (1) top and one (1) bottom frame.
The complete pallet weighs 300 pounds.
Shipment equals 140 Pallets Sets
Required Quantity: 464 Pallets Sets/Lots
Production run start date 10/23/2023. Pallets will be delivered to the vendor in
truckloads of 140 pallets per week and will pick up finished pallets on return trips.
*EACH LOAD MUST HAVE CERTIFICATION OF CONFORMANCE SIGNED BY QUALITY INSPECTOR CONFORMING TO ASTM-A123/A123M STANDARDS. *
Attachments
| File | Type | Posted |
|---|---|---|
| B01_SAM MF715-25.pdf | ||
| B08_W519TC24Q2029.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity