Middle Hayfork Plantation Thinning

Added: Jun 14, 2016 5:51 pm This project is to conduct pre-commercial thinning (both hand and mastication) activities on the South Fork Management Unit of the Shasta-Trinity National Forest. Pre-commercial thinning activities consist of thinning plantations that originated as early as 1965 and as recently as 1992.
All units are located within 10 air miles of Hayfork, California. The Base Item units are located in the Big Creek Area and can be accessed from Hayfork by following Highway 3 east from town, approximately 1 mile, turning left (north) onto Big Creek Road (County Road 324) and continuing for approximately 5.5 miles. Turn left onto the 4N08, units can be accessed off of the 4N08 and its spurs. The Optional Item units are located in the Tule Creek Area and can be accessed by taking Highway 3 west out of town, turning right onto Tule Creek Road. After about 3 miles Tule Creek Road becomes the 10 road, continue on the 10 road approximately 2 miles. Turn left onto the 31N31, travel about a 1.5 miles at the junction with the 31N29, one can go right 1 mile and access Item 4 or one could go left and access the remaining optional units. Please see the Project Map for specific unit access. Legal Description for the project areas are: Big Creek Area T33N, R11W and T32NR12W, M.D.M. Tule Creek Area: T31N, R12W AND T30N, R12W, M.D.M.
Unless otherwise provided, the Contractor will furnish all labor, transportation, equipment, tools, supervision, materials and any necessary incidentals to accomplish work on this project.

Contract Time: August 1, 2016 - January 31, 2017

Estimated Start Date: August 1, 2016

Set-Aside: This project is 100% set aside for Small Business.

Response Location: Offers will be accepted at the Northern California Acquisition Service Area, Redding Office, located within the Shasta-Trinity National Forest Headquarters at 3644 Avtech Parkway, Redding, CA 96002 NO LATER than time and date indicated on solicitation.

SAM REGISTRATION REQUIREMENTS: Prospective contractors must be registered in the System for Award Management (SAM) prior to award. SAM is a consolidation of the former Central Contractor Registration (CCR) and On-line Representation and Certification Application (ORCA) databases.