Media Production Studio

Closed Solicitation Posted

This opportunity was awarded. See the award notice from .

Solicitation number
3POB_EMR_Bragg_0001
Agency
Department of the Army Department of Defense
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
Not on record
PSC
67 Photographic Eqpt
Place of performance
Fort Bragg, NC 28310 28310 US

Notice details come from SAM.gov. Updated .

Notice text

4 versions

Update #4 · Latest ·

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 3POB_EMR_Bragg_0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 512110 with a small business size standard of $32.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-07-25 15:30:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Fort Bragg, NC 28310

The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: Sony MDR – 7506 Studio Headphones -40mm Neodymium Drivers -Closed Design -Swiveling Earcups -Single-Sided Cable -Coiled Cable -Soft Case, 4, EA;
LI 002: Shure SM7B Dynamic Microphones -For Professional Voice-Over Applications -Flat, Wide-Range Frequency Response -Air Suspension Shock Isolation -Pop Filter Built-In -Cardioid Polar Pattern -Roll-Off and Presence Boost Controls, 4, EA;
LI 003: Cannon XF405 or similar, Requirements – Compact Professional Video Camcorder, with a 1" CMOS Sensor, 15x optical zoom, 4K recording at 60 Frames per second, and 1080P recording at 120 Frames per second, Dual pixel auto focus, dual DIGIC DV 6 image processors, 2 x SD Card slots, Dual XLR inputs, four channels of audio, 3.5 inch LCD Display, with connectors for mini HDMI out, BNC out, 2.5mm LANC control, USB mini-B, RJ45 LAN, weighing no more than 4 LBS. With: 2 extra batteries and charger per camera EWA marine splash bags, 4, EA;
LI 004: Blackmagic Design URSA Mini Pro 4.6K G2 Digital Cinema Camera or similar Digital Cinema Camera with a Super 35 HDR CMOS 4.6K image sensor, capable of 120 fps at 4.6K, and 300 fps at 1080p, 4608 x 2592 with 15 stops of dynamic range at 3200 ISO, Blackmagic Design Generation 4 Color Science, interchangeable EF mount, neutral density (ND) filters, fold out 4 inch LCD monitor with touch screen controls, 12 VDC, 4-Pin XLR Connection, handheld to shoulder mounted to tripod mounted, for use to shot feature films, indie films, TV commercials, and documentaries. With: V mount battery plate for URSA, 15mm Studio Bridgeplate, SHAPE ARRI Standard 12" Dovetail Plate, Top Handle & Accessory Kit, 2 x 256 GB CFast Media cards, 2 High Capacity 90Wh V-Mount Battery, Power Supply - 12 VDC, 4-Pin XLR Connection Water proof Case with wheels, 1, EA;
LI 005: Atomos Shogun Inferno 7 inch Monitor/4K Recorder with Accessory Kit -Shogun Inferno 7" 4K HDMI/SDI Recorder -Hard Case, Batteries, Charger, Sunhood -Docking Station, Cables, Drive Caddies -1920 x 1200 Touchscreen Display -UHD 4K up to 60p/1080p up to 240 fps -4K HDMI & Quad 3G-SDI/Single 12G-SDI I/O -10-Bit FRC Monitor Processing -1500 cd/m² Brightness -10-Bit 4:2:2 ProRes & DNxHR Encoding -HDR Mode, 3D LUT Support & More, 2, EA;
LI 006: 1TB 860 QVO SATA III 2.5" Internal SSD -1TB Storage Capacity -2.5" / 7mm Form Factor -SATA III 6 Gb/s Interface -Up to 550 MB/s Sequential Read Speed -Up to 520 MB/s Sequential Write Speed -Samsung MJX Controller -AES 256-Bit & TCG/Opal v2.0 Encryption -TRIM Support -4-Bit MLC V-NAND Flash Memory -1.5 Million Hour MTBF & 360 TBW, 1, EA;
LI 007: Portable Light Kits, Lustra L50 3 light kit PRL Lighting’s L50 3-lite Kit consists of three Lustra L50 LED lights, each with a dedicated 12V/30A AC Adapter, 12†x8†Sofbox, 3pcs. Filter Set and stand mount contained in a rugged, backpack-style carry bag. durability - Their hybrid housing consists of a die cast aluminum front and carbon impregnated ABS rear to withstand constant use. The ability to use NPF L-series 7.2v batteries (not incl.) that last up to 3 hours is built in to the rear housing. The L50’s high efficiency and the kit’s portability make for an excellent alternative and enhancement to the photo/videographer’s overall kit. The L50 3-lite Kit offers adaptability for various applications. Its superior performance and quality of light combine with dedicated accessories that allow for its function as a main or complementary source light. Use the kit for portrait stills, photos of static subject matter, videos and shoots that require location moves, quick setups or a change in lighting conditions can all be addressed with the kit. Portability & performance lend for quick and easily managed setups for ENG, live/sporting events, interviews and reality TV. The L50 3-lite Kit is perfect for situations where superior performance and quality of light are combined with the need for speed and ease of use., 8, EA;
LI 008: Insta 360 ONE X 360 action camera -Up to 5.7K30 360 Video, up to 120 Mb/s -18MP 360 Photos -FlowState Digital Image Stabilization -Wi-Fi Connection to iOS/Android Devices -iOS/Android App & Mac/Windows Software -Storage to microSD Cards up to 128GB -Social Media/Live-Stream Sharing via App -HDR Mode -Cinematic Slow-Mo, Hyperlapse, Editing -Support for Bullet Time/GPS Accessories, 8, EA;
LI 009: Matthews C-Stand Rolling KitBag for 3 Stands (Black) • Holds 3 Removable Base C-Stands & More • Protective Internal Divider • Padded Bag with Dual-Zipper Closure, 2, EA;
LI 010: Ewa-Marine splash bags for Mark IV -For Large SLRs, 82mm Diam. Lens & Flash -Rated Down to 150' Dimensions (WxHxD) 8.66 x 14.5 x 4 to 8" (220 x 370 x 100 to 200 mm) Expandable tube, 1, EA;
LI 011: Field Audio Recorder/Mixer – Zoom F8N •8-channel/10-track field audio recorder/mixer •8 discrete inputs with locking Neutrik XLR/TRS combo connectors •Compact and lightweight aluminum chassis, weighing just 2 pounds (without batteries) •High quality mic preamps with up to 75 dB gain and less than -127 dBu EIN •Switchable +4dB inputs with mic/line options for both XLR and TRS •Advanced Look-Ahead Hybrid Limiters •Zoom AutoMix™ software •Support for up to 24-bit/192 kHz recording, and 44.1 kHz, plus 47.952 kHz/48.048 kHz for HD video compatibility; 16-/24-bit resolution •Accurate Time Code (0.2 ppm when on and up to 0.2 ppm when powered off) I/O on standard BNC connectors; dropframe/non-drop formats with Jam Sync •Three different power supply options: 8x AA batteries, external DC battery pack with Hirose connector, or 12V AC adapter (AA’s and DC battery pack not included) •Dedicated gain control knob, 6-segment LED level meter, and PFL/Solo switch for each channel

•High pass filter, phase invert, and Mid-Side decoder •Input delay of up to 30 msec per channel / output delay of up to 10 frames per output •Compatible with Zoom microphone capsules; optional extender cable enables remote positioning •Dual mini-XLR (TA3) balanced Main Outs plus ⅛" stereo mini-jack Sub Out •Dedicated headphone output (100 mW) with front panel volume control •2.4" full-color backlit LCD with monochromatic mode •Dedicated PFL display with viewable trim settings •Dual SD/SDHC/SDXC card slots, up to 512 GB each •Records in BWF-compliant WAV or MP3 file formats •Support for extensive metadata (BWF and iXML); input time, date, project, scene number, etc. •Built-in slate mic/slate tone with front panel switch •Use as an 8-in/4-out USB audio interface (@ 96 kHz) •Free Zoom F8 Control App for iOS allows wireless remote control, file renaming, and metadata entry, 2, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.

The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.

IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance

Shipping is FOB Destination CONUS (CONtinental U.S.).

New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.

Submitted Quotes will be valid for 45 days after the auction closing.

This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).

IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.

The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf

"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."

"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"

Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.

Wide Area WorkFlow Payment Instructions

252.204-7012 Safeguarding of Unclassified Controlled Technical Information

All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.

IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.

No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.

Wide Area WorkFlow Payment Instructions

Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Update #3 ·

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 3POB_EMR_Bragg_0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-02. The associated North American Industrial Classification System (NAICS) code for this procurement is 512110 with a small business size standard of $32.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-06-06 13:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Fort Bragg, NC 28310

The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: Sony MDR – 7506 Studio Headphones -40mm Neodymium Drivers -Closed Design -Swiveling Earcups -Single-Sided Cable -Coiled Cable -Soft Case, 16, EA;
LI 002: Shure SM7B Dynamic Microphones -For Professional Voice-Over Applications -Flat, Wide-Range Frequency Response -Air Suspension Shock Isolation -Pop Filter Built-In -Cardioid Polar Pattern -Roll-Off and Presence Boost Controls, 16, EA;
LI 003: Cannon XF405 or similar, Requirements – Compact Professional Video Camcorder, with a 1" CMOS Sensor, 15x optical zoom, 4K recording at 60 Frames per second, and 1080P recording at 120 Frames per second, Dual pixel auto focus, dual DIGIC DV 6 image processors, 2 x SD Card slots, Dual XLR inputs, four channels of audio, 3.5 inch LCD Display, with connectors for mini HDMI out, BNC out, 2.5mm LANC control, USB mini-B, RJ45 LAN, weighing no more than 4 LBS. With: 2 extra batteries and charger per camera EWA marine splash bags, 8, EA;
LI 004: Blackmagic Design URSA Mini Pro 4.6K G2 Digital Cinema Camera or similar Digital Cinema Camera with a Super 35 HDR CMOS 4.6K image sensor, capable of 120 fps at 4.6K, and 300 fps at 1080p, 4608 x 2592 with 15 stops of dynamic range at 3200 ISO, Blackmagic Design Generation 4 Color Science, interchangeable EF mount, neutral density (ND) filters, fold out 4 inch LCD monitor with touch screen controls, 12 VDC, 4-Pin XLR Connection, handheld to shoulder mounted to tripod mounted, for use to shot feature films, indie films, TV commercials, and documentaries. With: V mount battery plate for URSA, 15mm Studio Bridgeplate, SHAPE ARRI Standard 12" Dovetail Plate, Top Handle & Accessory Kit, 2 x 256 GB CFast Media cards, 2 High Capacity 90Wh V-Mount Battery, Power Supply - 12 VDC, 4-Pin XLR Connection Water proof Case with wheels, 2, EA;
LI 005: Atomos Shogun Inferno 7 inch Monitor/4K Recorder with Accessory Kit -Shogun Inferno 7" 4K HDMI/SDI Recorder -Hard Case, Batteries, Charger, Sunhood -Docking Station, Cables, Drive Caddies -1920 x 1200 Touchscreen Display -UHD 4K up to 60p/1080p up to 240 fps -4K HDMI & Quad 3G-SDI/Single 12G-SDI I/O -10-Bit FRC Monitor Processing -1500 cd/m² Brightness -10-Bit 4:2:2 ProRes & DNxHR Encoding -HDR Mode, 3D LUT Support & More, 2, EA;
LI 006: 1TB 860 QVO SATA III 2.5" Internal SSD -1TB Storage Capacity -2.5" / 7mm Form Factor -SATA III 6 Gb/s Interface -Up to 550 MB/s Sequential Read Speed -Up to 520 MB/s Sequential Write Speed -Samsung MJX Controller -AES 256-Bit & TCG/Opal v2.0 Encryption -TRIM Support -4-Bit MLC V-NAND Flash Memory -1.5 Million Hour MTBF & 360 TBW, 1, EA;
LI 007: Portable Light Kits, Lustra L50 3 light kit PRL Lighting’s L50 3-lite Kit consists of three Lustra L50 LED lights, each with a dedicated 12V/30A AC Adapter, 12†x8†Sofbox, 3pcs. Filter Set and stand mount contained in a rugged, backpack-style carry bag. durability - Their hybrid housing consists of a die cast aluminum front and carbon impregnated ABS rear to withstand constant use. The ability to use NPF L-series 7.2v batteries (not incl.) that last up to 3 hours is built in to the rear housing. The L50’s high efficiency and the kit’s portability make for an excellent alternative and enhancement to the photo/videographer’s overall kit. The L50 3-lite Kit offers adaptability for various applications. Its superior performance and quality of light combine with dedicated accessories that allow for its function as a main or complementary source light. Use the kit for portrait stills, photos of static subject matter, videos and shoots that require location moves, quick setups or a change in lighting conditions can all be addressed with the kit. Portability & performance lend for quick and easily managed setups for ENG, live/sporting events, interviews and reality TV. The L50 3-lite Kit is perfect for situations where superior performance and quality of light are combined with the need for speed and ease of use., 16, EA;
LI 008: Insta 360 ONE X 360 action camera -Up to 5.7K30 360 Video, up to 120 Mb/s -18MP 360 Photos -FlowState Digital Image Stabilization -Wi-Fi Connection to iOS/Android Devices -iOS/Android App & Mac/Windows Software -Storage to microSD Cards up to 128GB -Social Media/Live-Stream Sharing via App -HDR Mode -Cinematic Slow-Mo, Hyperlapse, Editing -Support for Bullet Time/GPS Accessories, 16, EA;
LI 009: Matthews C-Stand Rolling KitBag for 3 Stands (Black) • Holds 3 Removable Base C-Stands & More • Protective Internal Divider • Padded Bag with Dual-Zipper Closure, 2, EA;
LI 010: Ewa-Marine splash bags for Mark IV -For Large SLRs, 82mm Diam. Lens & Flash -Rated Down to 150' Dimensions (WxHxD) 8.66 x 14.5 x 4 to 8" (220 x 370 x 100 to 200 mm) Expandable tube, 1, EA;
LI 011: Field Audio Recorder/Mixer – Zoom F8N •8-channel/10-track field audio recorder/mixer •8 discrete inputs with locking Neutrik XLR/TRS combo connectors •Compact and lightweight aluminum chassis, weighing just 2 pounds (without batteries) •High quality mic preamps with up to 75 dB gain and less than -127 dBu EIN •Switchable +4dB inputs with mic/line options for both XLR and TRS •Advanced Look-Ahead Hybrid Limiters •Zoom AutoMix™ software •Support for up to 24-bit/192 kHz recording, and 44.1 kHz, plus 47.952 kHz/48.048 kHz for HD video compatibility; 16-/24-bit resolution •Accurate Time Code (0.2 ppm when on and up to 0.2 ppm when powered off) I/O on standard BNC connectors; dropframe/non-drop formats with Jam Sync •Three different power supply options: 8x AA batteries, external DC battery pack with Hirose connector, or 12V AC adapter (AA’s and DC battery pack not included) •Dedicated gain control knob, 6-segment LED level meter, and PFL/Solo switch for each channel

•High pass filter, phase invert, and Mid-Side decoder •Input delay of up to 30 msec per channel / output delay of up to 10 frames per output •Compatible with Zoom microphone capsules; optional extender cable enables remote positioning •Dual mini-XLR (TA3) balanced Main Outs plus ⅛" stereo mini-jack Sub Out •Dedicated headphone output (100 mW) with front panel volume control •2.4" full-color backlit LCD with monochromatic mode •Dedicated PFL display with viewable trim settings •Dual SD/SDHC/SDXC card slots, up to 512 GB each •Records in BWF-compliant WAV or MP3 file formats •Support for extensive metadata (BWF and iXML); input time, date, project, scene number, etc. •Built-in slate mic/slate tone with front panel switch •Use as an 8-in/4-out USB audio interface (@ 96 kHz) •Free Zoom F8 Control App for iOS allows wireless remote control, file renaming, and metadata entry, 1, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.

The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.

IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance

Shipping is FOB Destination CONUS (CONtinental U.S.).

New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.

Submitted Quotes will be valid for 45 days after the auction closing.

This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).

IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.

The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf

"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."

"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"

Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.

Wide Area WorkFlow Payment Instructions

252.204-7012 Safeguarding of Unclassified Controlled Technical Information

All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.

IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.

No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.

Wide Area WorkFlow Payment Instructions

Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Update #2 ·

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 3POB_EMR_Bragg_0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-02. The associated North American Industrial Classification System (NAICS) code for this procurement is 512110 with a small business size standard of $32.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-05-17 16:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Fort Bragg, NC 28310

The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: Sony MDR – 7506 Studio Headphones, 16, EA;
LI 002: Shure SM7B Dynamic Microphones, 16, EA;
LI 003: Cannon XF405 or similar, Requirements – Compact Professional Video Camcorder, with a 1" CMOS Sensor, 15x optical zoom, 4K recording at 60 Frames per second, and 1080P recording at 120 Frames per second, Dual pixel auto focus, dual DIGIC DV 6 image processors, 2 x SD Card slots, Dual XLR inputs, four channels of audio, 3.5 inch LCD Display, with connectors for mini HDMI out, BNC out, 2.5mm LANC control, USB mini-B, RJ45 LAN, weighing no more than 4 LBS. With: 2 extra batteries and charger per camera EWA marine splash bags, 8, EA;
LI 004: Blackmagic Design URSA Mini Pro 4.6K G2 Digital Cinema Camera or similar Digital Cinema Camera with a Super 35 HDR CMOS 4.6K image sensor, capable of 120 fps at 4.6K, and 300 fps at 1080p, 4608 x 2592 with 15 stops of dynamic range at 3200 ISO, Blackmagic Design Generation 4 Color Science, interchangeable EF mount, neutral density (ND) filters, fold out 4 inch LCD monitor with touch screen controls, 12 VDC, 4-Pin XLR Connection, handheld to shoulder mounted to tripod mounted, for use to shot feature films, indie films, TV commercials, and documentaries. With: V mount battery plate for URSA, 15mm Studio Bridgeplate, SHAPE ARRI Standard 12" Dovetail Plate, Top Handle & Accessory Kit, 2 x 256 GB CFast Media cards, 2 High Capacity 90Wh V-Mount Battery, Power Supply - 12 VDC, 4-Pin XLR Connection Water proof Case with wheels, 2, EA;
LI 005: Atomos Shogun Inferno 7 inch Monitor/4K Recorder with Accessory Kit, 2, EA;
LI 006: 1TB 860 QVO SATA III 2.5" Internal SSD, 1, EA;
LI 007: Portable Light Kits, PRLLIGHTING.COM Lustra L50 3 light kit, 16, EA;
LI 008: Insta 360 ONE X 360 action camera, 16, EA;
LI 009: Matthews C-Stand Rolling KitBag for 3 Stands (Black), 2, EA;
LI 010: Ewa-Marine splash bags for Mark IV, 1, EA;
LI 011: Field Audio Recorder/Mixer – Zoom F8N, 1, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.

The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.

IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance

Shipping is FOB Destination CONUS (CONtinental U.S.).

New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.

Submitted Quotes will be valid for 45 days after the auction closing.

This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).

IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.

The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf

"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."

"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"

Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.

Wide Area WorkFlow Payment Instructions

252.204-7012 Safeguarding of Unclassified Controlled Technical Information

All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.

IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.

No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.

Wide Area WorkFlow Payment Instructions

Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Update #1 ·

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 3POB_EMR_Bragg_0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 512110 with a small business size standard of $32.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-05-17 16:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Fort Bragg, NC 28310

The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: Sony MDR – 7506 Studio Headphones, 16, EA;
LI 002: Shure SM7B Dynamic Microphones, 16, EA;
LI 003: Cannon XF405 or similar, Requirements – Compact Professional Video Camcorder, with a 1" CMOS Sensor, 15x optical zoom, 4K recording at 60 Frames per second, and 1080P recording at 120 Frames per second, Dual pixel auto focus, dual DIGIC DV 6 image processors, 2 x SD Card slots, Dual XLR inputs, four channels of audio, 3.5 inch LCD Display, with connectors for mini HDMI out, BNC out, 2.5mm LANC control, USB mini-B, RJ45 LAN, weighing no more than 4 LBS. With: 2 extra batteries and charger per camera EWA marine splash bags, 8, EA;
LI 004: Blackmagic Design URSA Mini Pro 4.6K G2 Digital Cinema Camera or similar Digital Cinema Camera with a Super 35 HDR CMOS 4.6K image sensor, capable of 120 fps at 4.6K, and 300 fps at 1080p, 4608 x 2592 with 15 stops of dynamic range at 3200 ISO, Blackmagic Design Generation 4 Color Science, interchangeable EF mount, neutral density (ND) filters, fold out 4 inch LCD monitor with touch screen controls, 12 VDC, 4-Pin XLR Connection, handheld to shoulder mounted to tripod mounted, for use to shot feature films, indie films, TV commercials, and documentaries. With: V mount battery plate for URSA, 15mm Studio Bridgeplate, SHAPE ARRI Standard 12" Dovetail Plate, Top Handle & Accessory Kit, 2 x 256 GB CFast Media cards, 2 High Capacity 90Wh V-Mount Battery, Power Supply - 12 VDC, 4-Pin XLR Connection Water proof Case with wheels, 2, EA;
LI 005: Atomos Shogun Inferno 7 inch Monitor/4K Recorder with Accessory Kit, 2, EA;
LI 006: 1TB 860 QVO SATA III 2.5" Internal SSD, 1, EA;
LI 007: Portable Light Kits, PRLLIGHTING.COM Lustra L50 3 light kit, 16, EA;
LI 008: Insta 360 ONE X 360 action camera, 16, EA;
LI 009: Matthews C-Stand Rolling KitBag for 3 Stands (Black), 2, EA;
LI 010: Ewa-Marine splash bags for Mark IV, 1, EA;
LI 011: Field Audio Recorder/Mixer – Zoom F-6, 1, EA;

Solicitation and Buy Attachments

***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.

The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.

IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance

Shipping is FOB Destination CONUS (CONtinental U.S.).

New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.

Submitted Quotes will be valid for 45 days after the auction closing.

This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).

IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.

The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf

"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."

"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"

Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.

Wide Area WorkFlow Payment Instructions

252.204-7012 Safeguarding of Unclassified Controlled Technical Information

All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.

IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.

No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.

Wide Area WorkFlow Payment Instructions

Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.

Notice history

Notices posted for this opportunity, newest first
Notice Type Posted
Media Production Studio Award Award Notice
Media Production Studio This notice · Latest solicitation Solicitation

On GovTribe

Work this opportunity on GovTribe

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity