Matrix Switch and Distribution Systems

CLIN

DESCRIPTION

Qty

1

2

3

4

5

6

7

8

9

10

10a

10b

10c

10d

10e

11

11a

11b

11c

11d

11e

System-Switch-Solid State-Analog (DC-125MHZ ±1.5V): 128-input

160-output, non-blocking full-fanout tri-stage switching system with 50 Ohm 62 position D-Sub signal connectors, 10/100 Ethernet, USB, and D-Sub

Serial remote control ports, dual hot-swappable power supplies, hinged front panel with 10-inch advanced control touchscreen display, dual AC inputs in a

5RU rack mount enclosure

Input signal adapter panel (passive), 32 BNC connectors and expansion port, two 6-foot interconnect cables, two multipin termination plugs, and 75 ohm

input impedance (512x512)

Output signal adapter panel (Active), 32 BNC connectors and expansion port, two 6-foot interconnect cables, two multipin termination plugs, and 75 ohm

output impedance (512x512 maximum use), 90-264VAC power input, non-redundant supply section

Module-Switch-Solid-state-Analog (DC-125MHz ±1.5V): 32-inputs tri-stage input, 50 ohm termination, 62 position D-Sub signal connectors, for use in the model S2561 mainframe

Mid-Stage Module (eight always required for system)

Output Module: 32 channel, DC coupling, single ended

Plug-in power supply (hot-swap)

CPU Card: 10/100 Ethernet (LXI) port, USB 2.0 port, and D-Sub multi-serial (RS-232C/422A/485) port with field upgradable FLASH, realtime clock, microSD card slot, web browser interface and SNMP & TCP/IP, for use in touchscreen mainframes and compatible with most previous generation systems.

RouteWarePRO 4.0 Professional Control & Monitor GUI Software with Single User License (Version 3.0)

Distribution system with 2 sections of Analog 1x6 analog video

distribution with individual gain adjustment and DC offset control,

and 2 sections of Digital Dual 1x2 TTL with redundant hot-swappable power supplies comprised of the following components in their listed quantities:

Mainframe-LS Series: 16 slot, 3RU, front panel "window" and status LEDs

Power Supply Assembly: plug-in type (two needed for hot-swap redundancy)

Filler Plate: modules for LS16 systems (single slot)

Module-Distribution Amplifier-Solid State-Analog (DC-40MHz): 1x6 analog video distribution amplifier with BNC connectors, 75 ohm impedance, individual output gain adjustment, DC offset control, over voltage detection with set-point adjustment, and signal presence detection for use in an LS16 mainframe

Module-Distribution Amplifier-Solid State-Digital: Dual 1x2 digital distribution amplifier for synchronous TTL level unbalanced digital signals with configureable input impedance, BNC outputs, front panel status LED's, and front panel test point for use in an LS16 mainframe

Distribution system with 2 sections of Analog 1x6 analog video

distribution with individual gain adjustment and DC offset control, and 2 sections of Digital Dual 1x2 TTL with redundant hot-swappable power supplies comprised of the following components in their listed quantities:

Mainframe-LS Series: 16 slot, 3RU, front panel "window" and status LEDs

Power Supply Assembly: plug-in type (two needed for hot-swap redundancy)

Filler Plate: modules for LS16 systems (single slot)

Module-Distribution Amplifier-Solid State-Analog (DC-40MHz): 1x6 analog video distribution amplifier with BNC connectors, 75 ohm impedance, individual output gain adjustment, DC offset control, over voltage detection with set-point adjustment, and signal presence detection for use in an LS16 mainframe

Module-Distribution Amplifier-Solid State-Digital: Dual 1x2 digital distribution amplifier for synchronous TTL level unbalanced digital signals with configureable input impedance, BNC outputs, front panel status LED's, and front panel test point for use in an LS16 mainframe

Shipping and Handling

1

5

6

1

1

1

1

1

1

1

1

2

12

2

2

2

2

4

24

4

4

1