Large Vertical Turning Center

Closed Solicitation Posted

This opportunity was awarded. See the award notice from .

Solicitation number
N6833520R0121
Agency
Naval Air Warfare Center Naval Air Systems Command, Department of Defense
Responses due
Set-aside
No set-aside

Opportunity facts

NAICS code
333517 Machine Tool Manufacturing
PSC
3416 Lathes
Place of performance
Lakehurst Nj Usa

Notice details come from SAM.gov. Updated .

About this opportunity

This solicitation seeks proposals for one large vertical turning center with a minimum 98-inch swing over bed, 78-inch standard turning diameter, 50-inch turning height, 33,000-pound allowable workpiece weight, and 75 horsepower minimum main spindle motor. Proposals are due by 5:00 PM Eastern Standard Time on February 20, 2020 and must remain valid for 30 days. Award will be made to the responsible vendor submitting a technically acceptable proposal offering the lowest price. The Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey is procuring this equipment.

This is designated as a 100% total small business set-aside under NAICS code 333514. The place of performance is Lakehurst, New Jersey. Key requirements include live tooling, an automatic tool changer with 12 minimum tool positions, a Fanuc CNC controller, and Renishaw tooling accessories. Questions regarding this solicitation must be submitted by 5:00 PM Eastern Standard Time on February 20, 2020.

Notice text

3 versions

Update #3 · Latest ·

AMENDMENT 02

The following are questions received from industry and corresponding answers from Government:

Q1: Will foreign nationals be allowed access to the base and will they need to be escorted on the installation site?

A1: Yes, all personnel wishing to gain access to JB MDL - Lakehurst will have to go through base security to receive clearance and be escorted at all times.

Q2: Will contractor personnel be able to drive a car on the base and park near the installation site?

A2: Yes, you will be able to park vehicles roughly 200 ft away from the installation site.

Q3: We will be renting man lifts, forklifts and ladders. Is there any special requirements on your end?

A3: That is fine, vendors must ensure all personnel using the equipment are certified/trained to do so.

Q4: A part of the foundation work by the customer is to provide grout and labor to anchor the machine levelers to the foundation. Is that OK?

A4: This should be ok since we are planning on having the guy who does the foundation for us with us the day the machine arrives and is put in place on the foundation.  The Government is responsible for the foundation.  You are to provide the Government with a foundation drawing that states the foundation requirements for the proposed machinery.

Update #2 ·

AMENDMENT 01

THIS ANNOUNCEMENT IS BEING REPOSTED AS A FULL AND OPEN COMPETITION SINCE SMALL BUSINESSES ARE NOT ABLE TO MEET FAR 52.219-14 "LIMITATIONS ON SUBCONTRACTING"

ALL LARGE BUSINESSES ARE REQURIED TO SUBMIT A SMALL BUSINESS SUBCONTRACTING PLAN.

Update #1 ·

This is a combined synopsis / solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.  This announcement constitutes the only Solicitation; proposals are being requested and a written Solicitation is attached.  The provisions and clauses listed in the attached Solicitation document are supplemented with those in effect through Federal Acquisition Circular 2020-04.

This procurement is being solicited as a 100% total small-business set-aside.

The Naval Air Warfare Center Aircraft Division Lakehurst, NJ (NAWCADLKE) intends to competitively solicit and award a contract for the procurement of one (1) each Large Vertical Turning Center for the machine shop in the Prototype and Manufacturing Division on Joint Base MDL-Lakehurst, NJ in accordance with the Statement of Work contained within the attached Solicitation. 

New Equipment ONLY; NO remanufactured or "gray market" items.  All items must be covered by the manufacturer's warranty.

DELIVERY / SHIP-TO LOCATION: see attached Solicitation for delivery instructions / ship-to location(s).  Shipping Instructions - Shipping must be free on board (FOB) Destination - CONUS (Continental U.S.), which means that the Vendor must deliver the goods on its conveyance at the destination specified by the Government, and the Vendor is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.  The Solicitation states the required delivery schedule for the quantities listed.  Vendors are to provide their delivery schedule on the quantities listed if different than the date(s) listed on the Solicitation.  Earlier deliveries are acceptable at no additional cost(s) to the Government.

Vendors should read this announcement, and all attachment(s), carefully and submit the requested information as stated.  Vendors are to submit their proposal on the full requirement identified.  Partial proposals will not be considered.  Failure to submit a proposal for each line item will result in the entire proposal being deemed non-responsive.  Only one proposal per Vendor will be considered.  Proposal must state the time period that proposed prices are valid (i.e. 30 days, or a date certain).  An incomplete and / or late proposal will not be considered for evaluation and / or award.  The Government reserves the right to cancel this Solicitation, either before or after the response date.  The Contracting Officer reserves the right to make no award under this procedure.

NOTE: The final proposed price(s), both total and individual, MUST include all applicable taxes, fees, gratuities, commissions, service charges, etc... The Federal Government is tax exempt.

Vendors are put on notice that the Government will not be held liable for any requirement that is to be paid for by participants or any amounts associated with those items, including any guaranteed minimum purchases that the Vendor may require.  A written notice of award or acceptance of a proposal mailed or otherwise furnished to the successful Vendor within the time for acceptance specified in the proposal, shall result in a binding contract without further action by either party.  Before the specified expiration date and time of a proposal, the Government may accept the proposal whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

SYSTEM FOR AWARD MANAGEMENT (SAM) REQUIREMENT:  This Solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines.  Registration information can be found at www.sam.gov. Registration in SAM must be listed as "ACTIVE" at time of award.  In addition, the small business size for all Vendors that submit a proposal in response to this Solicitation will be validated via SAM.

BASIS OF AWARD:  An award resulting from this announcement will be made to the responsible Vendor whose proposal is technically acceptable, is in full compliance to all other requirements set forth in the Solicitation, and the lowest price.  Interested Vendors are cautioned that their initial proposal should contain the Vendors best terms from a technical and price standpoint.  However, the Government reserves the right to obtain clarifications and / or conduct discussions and request proposal revisions if the Contracting Officer later determines them to be necessary.  A Vendors past performance will be evaluated in accordance with Federal Acquisition Regulation Part 9 - "Contractor Qualifications" and will be included in the Government's responsibility determination.  To assist the Government in making a responsibility determination, Vendors are allowed to provide what the Vendor considers to be relevant past performance information with their proposal submission.  In addition, past performance information will be obtained from established systems such as the Past Performance Information Retrieval System, Federal Awardee Performance and Integrity Information System, Supplier Performance Risk System, Electronic Subcontract Reporting System, and / or other databases; and may be obtained from other sources available to the Government, such as the Defense Contract Management Agency and the Small Business Administration.  All proposals will be evaluated for compliance with the terms, conditions, and requirements set forth in this Solicitation.

Payments terms are upon Government acceptance of the full requirements on the resultant Contract.  Vendors are allowed to propose alternative payment terms for the Government's consideration.

Interested Vendors are to email their signed proposal to William Waterhouse, Contract Specialist, via the email specified in this announcement.  Questions concerning this Solicitation should be addressed to William Waterhouse, Contract Specialist, via the email specified.  Any question(s) received telephonically will not be answered and you are directed to submit your question(s) in writing to the Contract Specialist via the email specified in this announcement.  All questions and answers specific to this Solicitation will be posted to this website.

The deadline for question submittal is 5:00 p.m. Eastern Standard Time on Thursday, 20 February 2020.  Interested Vendors are requested to submit questions at the earliest possibledate to enable the Government to provide a comprehensive and timely response.  Any amendment(s) to this Solicitation will be posted to this website.  No telephone requests for the Solicitation will be accepted, no written requests will be accepted and no hard copies of the Solicitation package will be mailed.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/

Attachments

Files attached to this notice, newest first
File Type Posted
Solicitation _N6833520R0121.pdf PDF

Notice history

Notices posted for this opportunity, newest first
Notice Type Posted
Large Vertical Turning Center Award Award Notice
Large Vertical Turning Center This notice · Latest solicitation Solicitation

On GovTribe

Work this opportunity on GovTribe

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity