Install Radon Mitigation, NON-GOH (91 UN)

Added: May 26, 2016 9:32 pm All data contained herein is for information only and is subject to change. The data is for general purposes ONLY and SHALL NOT be used in preparation of any offer to the Government. In the event of discrepancy between the information shown here and the actual solicitation documents, the actual solicitation documents and amendments thereto shall govern. Anyone interested in making an offer on any solicitation referenced on herein should follow the solicitation instructions or contact the point of contact listed for the solicitation. The United States of America assumes no liability for the completeness or accuracy of the data contained herein and any use of such data inconsistent with this disclaimer shall be solely at the risk of the user. Interested offerors are encouraged to check often for changes (AMENDMENTS) to posted solicitations.

Solicitation Number: FA5270-16-R-0018, Project LXEZ 16-4313, Radon Mitigation, NON-GOH (91UN), Okinawa, Japan

Place of Contract Performance: Kadena AB, Okinawa Japan

Anticipated Set-aside Status: Unrestricted

Product or Service Code: Z2NZ

Anticipated Contract Type: Firm Fixed Price, Purchase Order

Anticipated Issue Date: On or about 6/11/2016

Disclosure of Magnitude: Between $250,000 and $500,000

Synopsis: In general, the contractor shall install a new radon mitigation system. The work being conducted shall include, but is not limited to the following:

1.1 Conduct a pre-installation inspection, gather relevant site data, and review existing drawings and radon sampling data. Determine size, location, and configuration of mitigation system to achieve radon reduction goals <4.0 picocuries per liter (pCi/L) for each housing unit.

1.2 Installation: Install new mitigation system that is needed based on pre-testing results, where results yielded 4.0 pCi/L or greater. Where possible, mitigation systems shall be completed using active soil depressurization (ASD) techniques and employ sub-slab depressurization (SSD) methods. All installed exterior hardware and components shall be corrosion resistant suitable for coastal marine environments. Provide electrical wire from new suction fan to existing circuit breaker panelboard. New interior conduit shall run above ceiling as much as possible.

1.3 Preparation of Final Report: Upon completion of the installation work, the Contractor shall provide a final report summarizing all field activities, and conclusions/recommendations. In addition, the Contractor shall provide (either as an appendix to the final report or a separate report) operations, maintenance and warranty information on installed systems. Include detailed photos of pre-existing conditions, work performed, and final conditions. Photos shall include unit numbers and written descriptions as necessary.

To be eligible for contract award, offerors must be registered and marked active in the System for Award management (SAM). Register via the SAM website https://www.sam.gov. All responsible sources may submit a proposal that shall be considered by this Agency. Interested contractors are encouraged to submit their contact information by registering as an interested vendor utilizing the Vendor Notification Service link within the Register to Receive Notification function of Federal Business Opportunities (FedBizOpps) at https://www/fbo.gov/. No bidder's mailing list will be maintained. This notice does not obligate the Government to award a contract or multiple contracts nor does it obligate the Government to pay for any bid/proposal preparation costs.Compact disc or physical hardcopies will not be available.

Point of contact:
Venice Pamparo
Contract Specialist
Unit 5199
APO, AP 96368-5199
Venice.pamparo.2@us.af.mil