Hoses

The Defense Logistics Agency, DLA Maritime Norfolk, Norfolk Naval Shipyard Contracting Division, intends to negotiate a Firm Fixed Price, 100% small business set-aside contract to procure: 

CLIN 0001

2.5 INCH SUCTION AND DISCHARGE HOSE, 2.5 INCH FEMALE CAMLOCK AND 2.5 INCH MALE CAMLOCK ... 50 FT SECTIONS 

QTY: 30 ASSEMBLY

Heavy duty, hard wall, suction, and discharge hose. Hose shall consist of nitrile/corrugated wrapped finished. Inner most tube shall be nitrile, reinforced with multiple textile plies and a dual wire helix. The hose inner liner (tube) and outer cover shall be BLACK in color. The color shall be thoroughly embedded into the reinforcement and helical wire(s) to provide a homogeneous hose wall and result in sufficient adhesion to meet the required hose application of the follow: 

• 2-1/2” I.D. X 3” O.D.
• HOSE MUST HAVE A WORKING PRESSURE OF 150 PSI (MINIMUM) AND 250 PSI (MAXIMUM).  HOSE MUST NOT EXCEED A BURST TEST PRESSURE OF 800 PSI.
• MUST HAVE A MINIMUM BEND RADIUS OF 2.5”
• 1.40 – 1.50 LBS. MAXIMUM WEIGHT PER FOOR WITHOUT COUPLING.
• HOSE SHALL BE CAPABLE OF TAKING A FULL VACUUM.
• MUST BE RESISTANT TO WEATHER, OIL, SOLVENTS, AND MILD ACIDS
• HOSE MUST HAVE A TEMPERATURE RATING OF -40 DEGREES (F) TO + 180 DEGREES (F).
• HOSES ARE TO BE PROVIDED IN 50 FOOT LENGTHS (+12” / -12”)
• HOSE MUST HAVE A MALE COUPLING (AA59326/2A-7-B) ON ONE END AND A FEMALE HOSE COUPLING (AA59326/6A-7-B) ON THE OTHER END. FITTINGS MUST BE RED BRASS ALLOY C84400.

NOTE: EACH COUPLINGS SHALL BE PERMANTLY/MECHANICALLY ATTACHED BY EXTERNAL CRIMPING, UTILIZING A STAINLESS STEEL CRIMP FERRULE IN ACCORDANCE WITH COUPLING MANUFACTURER’S RECOMMENDATION.

• EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG’S NAME, CONTRACT NUMBER AND PRESSURE RATING ON LAYLINE IN PERMANENT INK OR MOLDED INTO COVERING.
• SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 150 PSIG WITH CLEAN, FRESH WATER FOR 10 MINUTES WITH ZERO LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR BULGES.
• HOSE SHALL BE PARKER SWC609 OR EQUIVALENT
• AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING EVALUATION PROCESS.
• HOSE MUST BE PALLETIZED
• OFFERORS SPECIFICATIONS SHALL BE REVIEWED PRIOR TO AWARD.

CLIN 0002

2.5 INCH SUCTION AND DISCHARGE HOSE, 2.5 INCH FEMALE CAMLOCK AND 2.5 INCH MALE CAMLOCK ... 25 FT SECTIONS 

QTY: 32 ASSEMBLY

Heavy duty, hard wall, suction, and discharge hose. Hose shall consist of nitrile/corrugated wrapped finished. Inner most tube shall be nitrile, reinforced with multiple textile plies and a dual wire helix. The hose inner liner (tube) and outer cover shall be BLACK in color. The color shall be thoroughly embedded into the reinforcement and helical wire(s) to provide a homogeneous hose wall and result in sufficient adhesion to meet the required hose application of the follow: 

• 2-1/2” I.D. X 3” O.D.
• HOSE MUST HAVE A WORKING PRESSURE OF 150 PSI (MINIMUM) AND 250 PSI (MAXIMUM).  HOSE MUST NOT EXCEED A BURST TEST PRESSURE OF 800 PSI.
• MUST HAVE A MINIMUM BEND RADIUS OF 2.5”
• 1.40 – 1.50 LBS. MAXIMUM WEIGHT PER FOOR WITHOUT COUPLING.
• HOSE SHALL BE CAPABLE OF TAKING A FULL VACUUM.
• MUST BE RESISTANT TO WEATHER, OIL, SOLVENTS, AND MILD ACIDS
• HOSE MUST HAVE A TEMPERATURE RATING OF -40 DEGREES (F) TO + 180 DEGREES (F).
• HOSES ARE TO BE PROVIDED IN 25 FOOT LENGTHS (+12” / -12”)
• HOSE MUST HAVE A MALE COUPLING (AA59326/2A-7-B) ON ONE END AND A FEMALE HOSE COUPLING (AA59326/6A-7-B) ON THE OTHER END. FITTINGS MUST BE RED BRASS ALLOY C84400.

NOTE: EACH COUPLINGS SHALL BE PERMANTLY/MECHANICALLY ATTACHED BY EXTERNAL CRIMPING, UTILIZING A STAINLESS STEEL CRIMP FERRULE IN ACCORDANCE WITH COUPLING MANUFACTURER’S RECOMMENDATION.

• EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG’S NAME, CONTRACT NUMBER AND PRESSURE RATING ON LAYLINE IN PERMANENT INK OR MOLDED INTO COVERING.
• SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 150 PSIG WITH CLEAN, FRESH WATER FOR 10 MINUTES WITH ZERO LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR BULGES.
• HOSE SHALL BE PARKER SWC609 OR EQUIVALENT
• AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING EVALUATION PROCESS.
• HOSE MUST BE PALLETIZED
• OFFERORS SPECIFICATIONS SHALL BE REVIEWED PRIOR TO AWARD.

To be delivered to the Norfolk Naval Shipyard, Portsmouth, VA 23709-5000. The North American Industry Classification System (NAICS) codes are 326220. 

This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13, Simplified Acquisition Procedures. The solicitation number is SPMYM1-23-Q-0069 and it is expected to be posted on or around 26 July 2023. Quotes will be due by 5:00 PM EST on 04 August 2023 and may be emailed to the attention of Monica Richardson at  monica.richardson@dla.mil.  

Please make sure that the solicitation number (SPMYM1-23-Q-0069) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Vendors must answer all evaluation factors and sign the first page of the solicitation for their bids to be considered viable.  

 Award will be based on Total Lowest Price of material that meets salient characteristics and delivery schedule. 

Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at www.sam.gov (System for Award Management). By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.