Gun Barrels // LTC // Various Weapon Systems

Added: Apr 26, 2017 2:51 pm Modified: May 24, 2017 9:22 amTrack Changes

 

NSN(s): 

1005007879802

1005011428146

1005011838082

1005014733194

                 

 

Please see the attached file, SPE7LX-17-R-0057 NSN Data (Revised May 24 2017), for a list of NSNs with their item description, estimated annual demand quantity (ADQ), AMC/AMSC code, unit of issue, required delivery, inspection and acceptance location, and the approved manufacturer's code and part number.

 

FOB Origin

 

The solicitation will be issued unrestricted.

 

Surplus will not be acceptable for this procurement.

 

These items are "Defense Articles" as defined in and subject to the International Traffic in Arms Regulations (22 C.F.R. 120-30) and the Arms Export Control Act (22 U.S.C.A. 2778-2799).  Any manufacturer or exporter of Defense Articles is required to register with the Directorate Of

Defense Trade Controls (DDTC), Department Of State.  Documentary evidence of registration may be required prior to award.  Additional export restrictions apply as indicated herein.  Failure to submit DDTC registration when requested will make an offer ineligible for award.

 

These items have technical data some or all of which is subject to export-control regulations. Distribution of the technical data and eligibility for award are limited to those suppliers qualified through JCP Certification, or to those licensed by either the Departments of State or Commerce; or to foreign suppliers pursuant to international agreements.

 

To apply for JCP Certification, complete DD Form 2345, Military Critical Technical Data Agreement, form is available at the World Wide Web address:

 

https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx

 

Or by writing to:

 

DLA Logistics Information Service

Federal Center

74 Washington Ave., North

Battle Creek, MI 49037-3084

 

To manufacture these items, non-JCP certified suppliers must submit a current Manufacturing License Agreement, Technical Assistance Agreement, Distribution agreement or Off-shore Procurement Agreement approved by the Directorate of Defense Trade Controls with the offer, unless an exemption under the provisions of ITAR Section, 125.4 exemptions of general applicability, and/or EAR Part 740 are applicable.

 

Non-JCP certified suppliers seeking export controlled technical data are required to provide the Contracting Officer with an applicable agreement or identify which ITAR/EAR exemption applies to receive a copy of the export controlled technical data.

 

NOTE:  JCP certified contractors who receive technical data pursuant to their DD Form 2345 certification may not further disseminate such data unless further dissemination of the technical data is expressly permitted by DODD 5230.25.

 

 

Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at https://assist.dla.mil/online/start/index.cfm.  Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software.  Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257).  Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN:  442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP.

 

 

Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirement at time of award, in accordance with FAR clause 52.209-1 or 52.209-2. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation.

 

 

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

 

 

 

The solicitation will be available in DLA DIBBS on its issue date of 5/16/2017.  The website is https://www.dibbs.bsm.dla.mil/rfp

 

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved source is General Dynamics Ordnance and Tactical Systems (cage code 05606).

 

 The scope of this acquisition is for a firm-fixed price, Federal Acquisition Regulation (FAR) Part 15; Indefinite Quantity Contract (IQC) for the procurement of the following National Stock Numbers (NSNs):

 

1005007879802

1005011428146

1005011838082

1005014733194

                 

The Government is pursuing a long-term contract, for the duration of a three-year base and two separately priced one-year option periods for a potential total of five years.  The total contract value is not to exceed $73,733,780.25. This requirement is for DLA stock support the continental United States (CONUS). At the time of solicitation there are four NSNs being procured and managed by one Inventory Control Point (ICP - DLA Land and Maritime).  The scope of the solicitation will include all DLA managed gun barrels and related items for which General Dynamics-OTS (cage codes 05606 and 26978) is the sole approved source of supply.  Items within the scope, may be added at a later date in accordance with DLAD clause 52.216-9006, Addition/Deletion of Items.

 

The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (base plus option years) shall not exceed five years. 

 

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.

 

The Small Business size standard for NAICS Code 332994, Small Arms, Ordnance, and Ordnance Accessories Manufacturing, is 1,000 employees.

 

 

Added: Apr 26, 2017 2:51 pm Modified: May 16, 2017 9:53 amTrack Changes

 

NSN(s): 

1005007879802

1005011428146

1005011838082

1005014624306

1005014733194

                 

 

Please see the attached file, SPE7LX-17-R-0057 NSN Data, for a list of NSN(s) with their item description, estimated annual demand quantity (ADQ), AMC/AMSC code, unit of issue, required delivery, inspection and acceptance location, and the approved manufacturer's code and part number.

 

FOB Origin

 

The solicitation will be issued unrestricted.

 

Surplus will not be acceptable for this procurement.

 

These items are "Defense Articles" as defined in and subject to the International Traffic in Arms Regulations (22 C.F.R. 120-30) and the Arms Export Control Act (22 U.S.C.A. 2778-2799).  Any manufacturer or exporter of Defense Articles is required to register with the Directorate Of

Defense Trade Controls (DDTC), Department Of State.  Documentary evidence of registration may be required prior to award.  Additional export restrictions apply as indicated herein.  Failure to submit DDTC registration when requested will make an offer ineligible for award.

 

These items have technical data some or all of which is subject to export-control regulations. Distribution of the technical data and eligibility for award are limited to those suppliers qualified through JCP Certification, or to those licensed by either the Departments of State or Commerce; or to foreign suppliers pursuant to international agreements.

 

To apply for JCP Certification, complete DD Form 2345, Military Critical Technical Data Agreement, form is available at the World Wide Web address:

 

https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx

 

Or by writing to:

 

DLA Logistics Information Service

Federal Center

74 Washington Ave., North

Battle Creek, MI 49037-3084

 

To manufacture these item(s), non-JCP certified suppliers must submit a current Manufacturing License Agreement, Technical Assistance Agreement, Distribution agreement or Off-shore Procurement Agreement approved by the Directorate of Defense Trade Controls with the offer, unless an exemption under the provisions of ITAR Section, 125.4 exemptions of general applicability, and/or EAR Part 740 are applicable.

 

Non-JCP certified suppliers seeking export controlled technical data are required to provide the Contracting Officer with an applicable agreement or identify which ITAR/EAR exemption applies to receive a copy of the export controlled technical data.

 

NOTE:  JCP certified contractors who receive technical data pursuant to their DD Form 2345 certification may not further disseminate such data unless further dissemination of the technical data is expressly permitted by DODD 5230.25.

 

 

Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at https://assist.dla.mil/online/start/index.cfm.  Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software.  Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257).  Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN:  442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP.

 

 

Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirement at time of award, in accordance with FAR clause 52.209-1 or 52.209-2. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation.

 

 

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

 

 

 

The solicitation will be available in DLA DIBBS on its issue date of 5/16/2017.  The website is https://www.dibbs.bsm.dla.mil/rfp

 

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved source is General Dynamics Ordnance and Tactical Systems (cage code 05606).

 

 

Specifications, plans or drawings are not available.

 

 

The scope of this acquisition is for a firm-fixed price, Federal Acquisition Regulation (FAR) Part 15; Indefinite Quantity Contract (IQC) for the procurement of the following National Stock Numbers (NSNs):

 

1005007879802

1005011428146

1005011838082

1005014624306

1005014733194

                 

The Government is pursuing a long-term contract, for the duration of a three-year base and two separately priced one-year option periods for a potential total of five years.  The total contract value is not to exceed $73,733,780.25. This requirement is for DLA stock support the continental United States (CONUS). At the time of solicitation there are five NSNs being procured and managed by one Inventory Control Point (ICP - DLA Land and Maritime).  The scope of the solicitation will include all DLA managed gun barrels and related items for which General Dynamics-OTS (cage codes 05606 and 26978) is the sole approved source of supply.  Items within the scope, may be added at a later date in accordance with DLAD clause 52.216-9006, Addition/Deletion of Items.

 

The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (base plus option years) shall not exceed five years. 

 

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.

 

The Small Business size standard for NAICS Code 332994, Small Arms, Ordnance, and Ordnance Accessories Manufacturing, is 1,000 employees.

 

 

Added: Apr 26, 2017 2:51 pm

 

NSN(s): 

1005007879802

1005011428146

1005011838082

1005014624306

1005014733194

                 

 

Please see the attached file, SPE7LX-17-R-0057 NSN Data, for a list of NSN(s) with their item description, estimated annual demand quantity (ADQ), AMC/AMSC code, unit of issue, required delivery, inspection and acceptance location, and the approved manufacturer's code and part number.

 

FOB Origin

 

The solicitation will be issued unrestricted.

 

Surplus will not be acceptable for this procurement.

 

These items are "Defense Articles" as defined in and subject to the International Traffic in Arms Regulations (22 C.F.R. 120-30) and the Arms Export Control Act (22 U.S.C.A. 2778-2799).  Any manufacturer or exporter of Defense Articles is required to register with the Directorate Of

Defense Trade Controls (DDTC), Department Of State.  Documentary evidence of registration may be required prior to award.  Additional export restrictions apply as indicated herein.  Failure to submit DDTC registration when requested will make an offer ineligible for award.

 

These items have technical data some or all of which is subject to export-control regulations. Distribution of the technical data and eligibility for award are limited to those suppliers qualified through JCP Certification, or to those licensed by either the Departments of State or Commerce; or to foreign suppliers pursuant to international agreements.

 

To apply for JCP Certification, complete DD Form 2345, Military Critical Technical Data Agreement, form is available at the World Wide Web address:

 

https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx

 

Or by writing to:

 

DLA Logistics Information Service

Federal Center

74 Washington Ave., North

Battle Creek, MI 49037-3084

 

To manufacture these item(s), non-JCP certified suppliers must submit a current Manufacturing License Agreement, Technical Assistance Agreement, Distribution agreement or Off-shore Procurement Agreement approved by the Directorate of Defense Trade Controls with the offer, unless an exemption under the provisions of ITAR Section, 125.4 exemptions of general applicability, and/or EAR Part 740 are applicable.

 

Non-JCP certified suppliers seeking export controlled technical data are required to provide the Contracting Officer with an applicable agreement or identify which ITAR/EAR exemption applies to receive a copy of the export controlled technical data.

 

NOTE:  JCP certified contractors who receive technical data pursuant to their DD Form 2345 certification may not further disseminate such data unless further dissemination of the technical data is expressly permitted by DODD 5230.25.

 

 

Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at https://assist.dla.mil/online/start/index.cfm.  Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software.  Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257).  Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN:  442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP.

 

 

Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirement at time of award, in accordance with FAR clause 52.209-1 or 52.209-2. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation.

 

 

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

 

 

 

The solicitation will be available in DLA DIBBS on its issue date of 5/12/2017.  The website is https://www.dibbs.bsm.dla.mil/rfp

 

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved source is General Dynamics Ordnance and Tactical Systems (cage code 05606).

 

 

Specifications, plans or drawings are not available.

 

 

The scope of this acquisition is for a firm-fixed price, Federal Acquisition Regulation (FAR) Part 15; Indefinite Quantity Contract (IQC) for the procurement of the following National Stock Numbers (NSNs):

 

1005007879802

1005011428146

1005011838082

1005014624306

1005014733194

                 

The Government is pursuing a long-term contract, for the duration of a three-year base and two separately priced one-year option periods for a potential total of five years.  The total contract value is not to exceed $73,733,780.25. This requirement is for DLA stock support the continental United States (CONUS). At the time of solicitation there are five NSNs being procured and managed by one Inventory Control Point (ICP - DLA Land and Maritime).  The scope of the solicitation will include all DLA managed gun barrels and related items for which General Dynamics-OTS (cage codes 05606 and 26978) is the sole approved source of supply.  Items within the scope, may be added at a later date in accordance with DLAD clause 52.216-9006, Addition/Deletion of Items.

 

The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (base plus option years) shall not exceed five years. 

 

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.

 

The Small Business size standard for NAICS Code 332994, Small Arms, Ordnance, and Ordnance Accessories Manufacturing, is 1,000 employees.